| Message ID | 1548309279-5281-4-git-send-email-sumit.garg@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce TEE bus driver framework | expand |
On Thu, Jan 24, 2019 at 11:24:38AM +0530, Sumit Garg wrote: > OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ > services for TEE bus. So implement device enumeration using invoke > function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of > device UUIDs. Also register these enumerated devices with TEE bus as > "optee-clntX" device. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > --- > drivers/tee/optee/Makefile | 1 + > drivers/tee/optee/core.c | 4 + > drivers/tee/optee/device.c | 153 ++++++++++++++++++++++++++++++++++++++ > drivers/tee/optee/optee_private.h | 3 + > 4 files changed, 161 insertions(+) > create mode 100644 drivers/tee/optee/device.c > > diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile > index 48d262a..56263ae 100644 > --- a/drivers/tee/optee/Makefile > +++ b/drivers/tee/optee/Makefile > @@ -5,3 +5,4 @@ optee-objs += call.o > optee-objs += rpc.o > optee-objs += supp.o > optee-objs += shm_pool.o > +optee-objs += device.o > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > index e5efce3..ac59c77 100644 > --- a/drivers/tee/optee/core.c > +++ b/drivers/tee/optee/core.c > @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np) > if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) > pr_info("dynamic shared memory is enabled\n"); > > + rc = optee_enumerate_devices(); > + if (rc) > + goto err; > + > pr_info("initialized driver\n"); > return optee; > err: > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > new file mode 100644 > index 0000000..987e552 > --- /dev/null > +++ b/drivers/tee/optee/device.c > @@ -0,0 +1,153 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 Linaro Ltd. > + */ > + Does there need to be a pr_fmt() here (to make the pr_*() messages from this file match those from the optee/core.c): #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Alternatively you could get the probe function to pass the optee device and use dev_*()... TBH this is pretty severe nitpicking so feel free to add my reviewed by the next time this patch comes around: Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Daniel. > +#include <linux/kernel.h> > +#include <linux/slab.h> > +#include <linux/tee_drv.h> > +#include <linux/uuid.h> > +#include "optee_private.h" > + > +/* > + * Get device UUIDs > + * > + * [out] memref[0] Array of device UUIDs > + * > + * Return codes: > + * TEE_SUCCESS - Invoke command success > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required > + */ > +#define PTA_CMD_GET_DEVICES 0x0 > + > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > + return 1; > + else > + return 0; > +} > + > +static int get_devices(struct tee_context *ctx, u32 session, > + struct tee_shm *device_shm, u32 *shm_size) > +{ > + u32 ret = 0; > + struct tee_ioctl_invoke_arg inv_arg = {0}; > + struct tee_param param[4] = {0}; > + > + /* Invoke PTA_CMD_GET_DEVICES function */ > + inv_arg.func = PTA_CMD_GET_DEVICES; > + inv_arg.session = session; > + inv_arg.num_params = 4; > + > + /* Fill invoke cmd params */ > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[0].u.memref.shm = device_shm; > + param[0].u.memref.size = *shm_size; > + param[0].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > + if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > + (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > + pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > + inv_arg.ret); > + return -EINVAL; > + } > + > + *shm_size = param[0].u.memref.size; > + > + return 0; > +} > + > +static int optee_register_device(const uuid_t *device_uuid, u32 device_id) > +{ > + struct tee_client_device *optee_device = NULL; > + int rc; > + > + optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL); > + if (!optee_device) > + return -ENOMEM; > + > + optee_device->dev.bus = &tee_bus_type; > + dev_set_name(&optee_device->dev, "optee-clnt%u", device_id); > + uuid_copy(&optee_device->id.uuid, device_uuid); > + > + rc = device_register(&optee_device->dev); > + if (rc) { > + pr_err("device registration failed, err: %d\n", rc); > + kfree(optee_device); > + } > + > + return rc; > +} > + > +int optee_enumerate_devices(void) > +{ > + const uuid_t pta_uuid = > + UUID_INIT(0x7011a688, 0xddde, 0x4053, > + 0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8); > + struct tee_ioctl_open_session_arg sess_arg = {0}; > + struct tee_shm *device_shm = NULL; > + const uuid_t *device_uuid = NULL; > + struct tee_context *ctx = NULL; > + u32 shm_size = 0, idx, num_devices = 0; > + int rc; > + > + /* Open context with OP-TEE driver */ > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); > + if (IS_ERR(ctx)) > + return -ENODEV; > + > + /* Open session with device enumeration pseudo TA */ > + memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN); > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; > + sess_arg.num_params = 0; > + > + rc = tee_client_open_session(ctx, &sess_arg, NULL); > + if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) { > + /* Device enumeration pseudo TA not found */ > + rc = 0; > + goto out_ctx; > + } > + > + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size); > + if (rc < 0) > + goto out_sess; > + > + device_shm = tee_shm_alloc(ctx, shm_size, > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); > + if (IS_ERR(device_shm)) { > + pr_err("tee_shm_alloc failed\n"); > + rc = PTR_ERR(device_shm); > + goto out_sess; > + } > + > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size); > + if (rc < 0) > + goto out_shm; > + > + device_uuid = tee_shm_get_va(device_shm, 0); > + if (IS_ERR(device_uuid)) { > + pr_err("tee_shm_get_va failed\n"); > + rc = PTR_ERR(device_uuid); > + goto out_shm; > + } > + > + num_devices = shm_size / sizeof(uuid_t); > + > + for (idx = 0; idx < num_devices; idx++) { > + rc = optee_register_device(&device_uuid[idx], idx); > + if (rc) > + goto out_shm; > + } > + > +out_shm: > + tee_shm_free(device_shm); > +out_sess: > + tee_client_close_session(ctx, sess_arg.session); > +out_ctx: > + tee_client_close_context(ctx); > + > + return rc; > +} > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > index 35e7938..a5e84af 100644 > --- a/drivers/tee/optee/optee_private.h > +++ b/drivers/tee/optee/optee_private.h > @@ -28,6 +28,7 @@ > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > +#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > > #define TEEC_ORIGIN_COMMS 0x00000002 > > @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries); > void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, > size_t page_offset); > > +int optee_enumerate_devices(void); > + > /* > * Small helpers > */ > -- > 2.7.4 >
On Thu, 24 Jan 2019 at 15:45, Daniel Thompson <daniel.thompson@linaro.org> wrote: > > On Thu, Jan 24, 2019 at 11:24:38AM +0530, Sumit Garg wrote: > > OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ > > services for TEE bus. So implement device enumeration using invoke > > function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of > > device UUIDs. Also register these enumerated devices with TEE bus as > > "optee-clntX" device. > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > --- > > drivers/tee/optee/Makefile | 1 + > > drivers/tee/optee/core.c | 4 + > > drivers/tee/optee/device.c | 153 ++++++++++++++++++++++++++++++++++++++ > > drivers/tee/optee/optee_private.h | 3 + > > 4 files changed, 161 insertions(+) > > create mode 100644 drivers/tee/optee/device.c > > > > diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile > > index 48d262a..56263ae 100644 > > --- a/drivers/tee/optee/Makefile > > +++ b/drivers/tee/optee/Makefile > > @@ -5,3 +5,4 @@ optee-objs += call.o > > optee-objs += rpc.o > > optee-objs += supp.o > > optee-objs += shm_pool.o > > +optee-objs += device.o > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > index e5efce3..ac59c77 100644 > > --- a/drivers/tee/optee/core.c > > +++ b/drivers/tee/optee/core.c > > @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np) > > if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) > > pr_info("dynamic shared memory is enabled\n"); > > > > + rc = optee_enumerate_devices(); > > + if (rc) > > + goto err; > > + > > pr_info("initialized driver\n"); > > return optee; > > err: > > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > > new file mode 100644 > > index 0000000..987e552 > > --- /dev/null > > +++ b/drivers/tee/optee/device.c > > @@ -0,0 +1,153 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2019 Linaro Ltd. > > + */ > > + > > Does there need to be a pr_fmt() here (to make the pr_*() messages from > this file match those from the optee/core.c): > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > I think for consistency with optee/core.c file prints, will add this here. > Alternatively you could get the probe function to pass the optee device > and use dev_*()... > > TBH this is pretty severe nitpicking so feel free to add my reviewed > by the next time this patch comes around: > No worries :). -Sumit > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> > > > Daniel. > > > +#include <linux/kernel.h> > > +#include <linux/slab.h> > > +#include <linux/tee_drv.h> > > +#include <linux/uuid.h> > > +#include "optee_private.h" > > + > > +/* > > + * Get device UUIDs > > + * > > + * [out] memref[0] Array of device UUIDs > > + * > > + * Return codes: > > + * TEE_SUCCESS - Invoke command success > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > > + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required > > + */ > > +#define PTA_CMD_GET_DEVICES 0x0 > > + > > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > > +{ > > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > > + return 1; > > + else > > + return 0; > > +} > > + > > +static int get_devices(struct tee_context *ctx, u32 session, > > + struct tee_shm *device_shm, u32 *shm_size) > > +{ > > + u32 ret = 0; > > + struct tee_ioctl_invoke_arg inv_arg = {0}; > > + struct tee_param param[4] = {0}; > > + > > + /* Invoke PTA_CMD_GET_DEVICES function */ > > + inv_arg.func = PTA_CMD_GET_DEVICES; > > + inv_arg.session = session; > > + inv_arg.num_params = 4; > > + > > + /* Fill invoke cmd params */ > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > > + param[0].u.memref.shm = device_shm; > > + param[0].u.memref.size = *shm_size; > > + param[0].u.memref.shm_offs = 0; > > + > > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > > + if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > > + (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > > + pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > > + inv_arg.ret); > > + return -EINVAL; > > + } > > + > > + *shm_size = param[0].u.memref.size; > > + > > + return 0; > > +} > > + > > +static int optee_register_device(const uuid_t *device_uuid, u32 device_id) > > +{ > > + struct tee_client_device *optee_device = NULL; > > + int rc; > > + > > + optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL); > > + if (!optee_device) > > + return -ENOMEM; > > + > > + optee_device->dev.bus = &tee_bus_type; > > + dev_set_name(&optee_device->dev, "optee-clnt%u", device_id); > > + uuid_copy(&optee_device->id.uuid, device_uuid); > > + > > + rc = device_register(&optee_device->dev); > > + if (rc) { > > + pr_err("device registration failed, err: %d\n", rc); > > + kfree(optee_device); > > + } > > + > > + return rc; > > +} > > + > > +int optee_enumerate_devices(void) > > +{ > > + const uuid_t pta_uuid = > > + UUID_INIT(0x7011a688, 0xddde, 0x4053, > > + 0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8); > > + struct tee_ioctl_open_session_arg sess_arg = {0}; > > + struct tee_shm *device_shm = NULL; > > + const uuid_t *device_uuid = NULL; > > + struct tee_context *ctx = NULL; > > + u32 shm_size = 0, idx, num_devices = 0; > > + int rc; > > + > > + /* Open context with OP-TEE driver */ > > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); > > + if (IS_ERR(ctx)) > > + return -ENODEV; > > + > > + /* Open session with device enumeration pseudo TA */ > > + memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN); > > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; > > + sess_arg.num_params = 0; > > + > > + rc = tee_client_open_session(ctx, &sess_arg, NULL); > > + if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) { > > + /* Device enumeration pseudo TA not found */ > > + rc = 0; > > + goto out_ctx; > > + } > > + > > + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size); > > + if (rc < 0) > > + goto out_sess; > > + > > + device_shm = tee_shm_alloc(ctx, shm_size, > > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); > > + if (IS_ERR(device_shm)) { > > + pr_err("tee_shm_alloc failed\n"); > > + rc = PTR_ERR(device_shm); > > + goto out_sess; > > + } > > + > > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size); > > + if (rc < 0) > > + goto out_shm; > > + > > + device_uuid = tee_shm_get_va(device_shm, 0); > > + if (IS_ERR(device_uuid)) { > > + pr_err("tee_shm_get_va failed\n"); > > + rc = PTR_ERR(device_uuid); > > + goto out_shm; > > + } > > + > > + num_devices = shm_size / sizeof(uuid_t); > > + > > + for (idx = 0; idx < num_devices; idx++) { > > + rc = optee_register_device(&device_uuid[idx], idx); > > + if (rc) > > + goto out_shm; > > + } > > + > > +out_shm: > > + tee_shm_free(device_shm); > > +out_sess: > > + tee_client_close_session(ctx, sess_arg.session); > > +out_ctx: > > + tee_client_close_context(ctx); > > + > > + return rc; > > +} > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > > index 35e7938..a5e84af 100644 > > --- a/drivers/tee/optee/optee_private.h > > +++ b/drivers/tee/optee/optee_private.h > > @@ -28,6 +28,7 @@ > > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > > +#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > > > > #define TEEC_ORIGIN_COMMS 0x00000002 > > > > @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries); > > void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, > > size_t page_offset); > > > > +int optee_enumerate_devices(void); > > + > > /* > > * Small helpers > > */ > > -- > > 2.7.4 > >
diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile index 48d262a..56263ae 100644 --- a/drivers/tee/optee/Makefile +++ b/drivers/tee/optee/Makefile @@ -5,3 +5,4 @@ optee-objs += call.o optee-objs += rpc.o optee-objs += supp.o optee-objs += shm_pool.o +optee-objs += device.o diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index e5efce3..ac59c77 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np) if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) pr_info("dynamic shared memory is enabled\n"); + rc = optee_enumerate_devices(); + if (rc) + goto err; + pr_info("initialized driver\n"); return optee; err: diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c new file mode 100644 index 0000000..987e552 --- /dev/null +++ b/drivers/tee/optee/device.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Linaro Ltd. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/tee_drv.h> +#include <linux/uuid.h> +#include "optee_private.h" + +/* + * Get device UUIDs + * + * [out] memref[0] Array of device UUIDs + * + * Return codes: + * TEE_SUCCESS - Invoke command success + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required + */ +#define PTA_CMD_GET_DEVICES 0x0 + +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + if (ver->impl_id == TEE_IMPL_ID_OPTEE) + return 1; + else + return 0; +} + +static int get_devices(struct tee_context *ctx, u32 session, + struct tee_shm *device_shm, u32 *shm_size) +{ + u32 ret = 0; + struct tee_ioctl_invoke_arg inv_arg = {0}; + struct tee_param param[4] = {0}; + + /* Invoke PTA_CMD_GET_DEVICES function */ + inv_arg.func = PTA_CMD_GET_DEVICES; + inv_arg.session = session; + inv_arg.num_params = 4; + + /* Fill invoke cmd params */ + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; + param[0].u.memref.shm = device_shm; + param[0].u.memref.size = *shm_size; + param[0].u.memref.shm_offs = 0; + + ret = tee_client_invoke_func(ctx, &inv_arg, param); + if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && + (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { + pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", + inv_arg.ret); + return -EINVAL; + } + + *shm_size = param[0].u.memref.size; + + return 0; +} + +static int optee_register_device(const uuid_t *device_uuid, u32 device_id) +{ + struct tee_client_device *optee_device = NULL; + int rc; + + optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL); + if (!optee_device) + return -ENOMEM; + + optee_device->dev.bus = &tee_bus_type; + dev_set_name(&optee_device->dev, "optee-clnt%u", device_id); + uuid_copy(&optee_device->id.uuid, device_uuid); + + rc = device_register(&optee_device->dev); + if (rc) { + pr_err("device registration failed, err: %d\n", rc); + kfree(optee_device); + } + + return rc; +} + +int optee_enumerate_devices(void) +{ + const uuid_t pta_uuid = + UUID_INIT(0x7011a688, 0xddde, 0x4053, + 0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8); + struct tee_ioctl_open_session_arg sess_arg = {0}; + struct tee_shm *device_shm = NULL; + const uuid_t *device_uuid = NULL; + struct tee_context *ctx = NULL; + u32 shm_size = 0, idx, num_devices = 0; + int rc; + + /* Open context with OP-TEE driver */ + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); + if (IS_ERR(ctx)) + return -ENODEV; + + /* Open session with device enumeration pseudo TA */ + memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN); + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; + sess_arg.num_params = 0; + + rc = tee_client_open_session(ctx, &sess_arg, NULL); + if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) { + /* Device enumeration pseudo TA not found */ + rc = 0; + goto out_ctx; + } + + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size); + if (rc < 0) + goto out_sess; + + device_shm = tee_shm_alloc(ctx, shm_size, + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); + if (IS_ERR(device_shm)) { + pr_err("tee_shm_alloc failed\n"); + rc = PTR_ERR(device_shm); + goto out_sess; + } + + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size); + if (rc < 0) + goto out_shm; + + device_uuid = tee_shm_get_va(device_shm, 0); + if (IS_ERR(device_uuid)) { + pr_err("tee_shm_get_va failed\n"); + rc = PTR_ERR(device_uuid); + goto out_shm; + } + + num_devices = shm_size / sizeof(uuid_t); + + for (idx = 0; idx < num_devices; idx++) { + rc = optee_register_device(&device_uuid[idx], idx); + if (rc) + goto out_shm; + } + +out_shm: + tee_shm_free(device_shm); +out_sess: + tee_client_close_session(ctx, sess_arg.session); +out_ctx: + tee_client_close_context(ctx); + + return rc; +} diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 35e7938..a5e84af 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -28,6 +28,7 @@ #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C +#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 #define TEEC_ORIGIN_COMMS 0x00000002 @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries); void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, size_t page_offset); +int optee_enumerate_devices(void); + /* * Small helpers */
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- drivers/tee/optee/Makefile | 1 + drivers/tee/optee/core.c | 4 + drivers/tee/optee/device.c | 153 ++++++++++++++++++++++++++++++++++++++ drivers/tee/optee/optee_private.h | 3 + 4 files changed, 161 insertions(+) create mode 100644 drivers/tee/optee/device.c