| Message ID | 1548853196-11447-5-git-send-email-aisheng.dong@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | irq: imx-irqsteer: add 32 interrupts chan and multi outputs support | expand |
Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong: > One irqsteer channel can support up to 8 output interrupts. > > > Cc: Marc Zyngier <marc.zyngier@arm.com> > > Cc: Lucas Stach <l.stach@pengutronix.de> > > Cc: Shawn Guo <shawnguo@kernel.org> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > --- > ChangeLog: > v1->v2: > * calculate irq_count by fsl,num-irqs instead of parsing interrupts > property from devicetree to match the input interrupts and outputs > * improve output interrupt handler by searching only two registers > withint the same group > --- > drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++--------- > 1 file changed, 59 insertions(+), 17 deletions(-) > > diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c > index 67ed862..cc40039 100644 > --- a/drivers/irqchip/irq-imx-irqsteer.c > +++ b/drivers/irqchip/irq-imx-irqsteer.c > @@ -10,6 +10,7 @@ > #include <linux/irqchip/chained_irq.h> > #include <linux/irqdomain.h> > #include <linux/kernel.h> > +#include <linux/of_irq.h> > #include <linux/of_platform.h> > #include <linux/spinlock.h> > > @@ -21,10 +22,13 @@ > > #define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4) > > #define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8) > > > +#define CHAN_MAX_OUTPUT_INT 0x8 > + > struct irqsteer_data { > > > void __iomem *regs; > > > struct clk *ipg_clk; > > > - int irq; > > > + int irq[CHAN_MAX_OUTPUT_INT]; > > > + int irq_count; > > > raw_spinlock_t lock; > > > int reg_num; > > > int channel; > @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = { > > > .xlate = irq_domain_xlate_onecell, > }; > > +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq) > +{ > > + int i; > + > > + for (i = 0; i < data->irq_count; i++) { > > + if (data->irq[i] == irq) > + break; return i * 64; here... > + } > + > + return i * 64; ... and -EINVAL or something here, so we don't return a out of bounds hwirq base if the loop ever doesn't match something? > +} > + > static void imx_irqsteer_irq_handler(struct irq_desc *desc) > { > > struct irqsteer_data *data = irq_desc_get_handler_data(desc); > > + int hwirq; > > int i; > > > chained_irq_enter(irq_desc_get_chip(desc), desc); > > > - for (i = 0; i < data->reg_num * 32; i += 32) { > > - int idx = imx_irqsteer_get_reg_index(data, i); > > + hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc)); > + > > + for (i = 0; i < 2; i++) { > > + int idx = imx_irqsteer_get_reg_index(data, hwirq); > > unsigned long irqmap; > > int pos, virq; > > > + if (hwirq >= data->reg_num * 32) > > + break; > + > > irqmap = readl_relaxed(data->regs + > > CHANSTATUS(idx, data->reg_num)); > > > for_each_set_bit(pos, &irqmap, 32) { > > - virq = irq_find_mapping(data->domain, pos + i); > + virq = irq_find_mapping(data->domain, pos + hwirq); The irq index calculation need to be "pos + i * 32 + hwirq", otherwise this will map to the wrong virqs for the second register in each group. > if (virq) > > generic_handle_irq(virq); > > } > + hwirq += 32; Could be folded into the loop head. > } > > > chained_irq_exit(irq_desc_get_chip(desc), desc); > @@ -117,7 +140,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > struct device_node *np = pdev->dev.of_node; > > struct irqsteer_data *data; > > struct resource *res; > > - int ret; > > + u32 irqs_num; > > + int i, ret; > > > data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); > > if (!data) > @@ -130,12 +154,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > return PTR_ERR(data->regs); > > } > > > - data->irq = platform_get_irq(pdev, 0); > > - if (data->irq <= 0) { > > - dev_err(&pdev->dev, "failed to get irq\n"); > > - return -ENODEV; > > - } > - > > data->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); > > if (IS_ERR(data->ipg_clk)) { > > ret = PTR_ERR(data->ipg_clk); > @@ -146,11 +164,17 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > > raw_spin_lock_init(&data->lock); > > > - of_property_read_u32(np, "fsl,num-irqs", &data->reg_num); > > + of_property_read_u32(np, "fsl,num-irqs", &irqs_num); > > of_property_read_u32(np, "fsl,channel", &data->channel); > > > - /* one register bit map represents 32 input interrupts */ > > - data->reg_num /= 32; > > + /* > + * There is one output irqs for each group of 64 inputs. "irq", singular. > + * One register bit map can represent 32 input interrupts. > > + */ > > + data->irq_count = irqs_num / 64; > > + if (irqs_num % 64) > + data->irq_count += 1; This is a weird way of writing DIV_ROUND_UP. > + data->reg_num = irqs_num / 32; > > > if (IS_ENABLED(CONFIG_PM_SLEEP)) { > > data->saved_reg = devm_kzalloc(&pdev->dev, > @@ -177,8 +201,22 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > return -ENOMEM; > > } > > > - irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler, > > - data); > > + if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) { > > + clk_disable_unprepare(data->ipg_clk); > > + return -EINVAL; > > + } > + > > + for (i = 0; i < data->irq_count; i++) { > > + data->irq[i] = irq_of_parse_and_map(np, i); > > + if (!data->irq[i]) { > > + clk_disable_unprepare(data->ipg_clk); > + return -EINVAL; With a lot of failure paths now replicating the clk_disable_unprepare, return error, I think this warrants a common cleanup path that all those paths could reach via simple goto. > + } > + > > + irq_set_chained_handler_and_data(data->irq[i], > > + imx_irqsteer_irq_handler, > > + data); > > + } > > > platform_set_drvdata(pdev, data); > > @@ -188,8 +226,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > static int imx_irqsteer_remove(struct platform_device *pdev) > { > > struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev); > > + int i; > + > > + for (i = 0; i < irqsteer_data->irq_count; i++) > > + irq_set_chained_handler_and_data(irqsteer_data->irq[i], > > + NULL, NULL); > > > - irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL); > > irq_domain_remove(irqsteer_data->domain); > > > clk_disable_unprepare(irqsteer_data->ipg_clk);
On Wed, Jan 30, 2019 at 9:33 PM Lucas Stach <l.stach@pengutronix.de> wrote: > > Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong: > > One irqsteer channel can support up to 8 output interrupts. > > > > > Cc: Marc Zyngier <marc.zyngier@arm.com> > > > Cc: Lucas Stach <l.stach@pengutronix.de> > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > --- > > ChangeLog: > > v1->v2: > > * calculate irq_count by fsl,num-irqs instead of parsing interrupts > > property from devicetree to match the input interrupts and outputs > > * improve output interrupt handler by searching only two registers > > withint the same group > > --- > > drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++--------- > > 1 file changed, 59 insertions(+), 17 deletions(-) > > > > diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c > > index 67ed862..cc40039 100644 > > --- a/drivers/irqchip/irq-imx-irqsteer.c > > +++ b/drivers/irqchip/irq-imx-irqsteer.c > > @@ -10,6 +10,7 @@ > > #include <linux/irqchip/chained_irq.h> > > #include <linux/irqdomain.h> > > #include <linux/kernel.h> > > +#include <linux/of_irq.h> > > #include <linux/of_platform.h> > > #include <linux/spinlock.h> > > > > @@ -21,10 +22,13 @@ > > > #define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4) > > > #define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8) > > > > > +#define CHAN_MAX_OUTPUT_INT 0x8 > > + > > struct irqsteer_data { > > > > void __iomem *regs; > > > > struct clk *ipg_clk; > > > > - int irq; > > > > + int irq[CHAN_MAX_OUTPUT_INT]; > > > > + int irq_count; > > > > raw_spinlock_t lock; > > > > int reg_num; > > > > int channel; > > @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = { > > > > .xlate = irq_domain_xlate_onecell, > > }; > > > > +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq) > > +{ > > > + int i; > > + > > > + for (i = 0; i < data->irq_count; i++) { > > > + if (data->irq[i] == irq) > > + break; > > return i * 64; here... > > + } > > + > > + return i * 64; > > ... and -EINVAL or something here, so we don't return a out of bounds > hwirq base if the loop ever doesn't match something? > Good suggestion, will add it. > > +} > > + > > static void imx_irqsteer_irq_handler(struct irq_desc *desc) > > { > > > struct irqsteer_data *data = irq_desc_get_handler_data(desc); > > > + int hwirq; > > > int i; > > > > > chained_irq_enter(irq_desc_get_chip(desc), desc); > > > > > - for (i = 0; i < data->reg_num * 32; i += 32) { > > > - int idx = imx_irqsteer_get_reg_index(data, i); > > > + hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc)); > > + > > > + for (i = 0; i < 2; i++) { > > > + int idx = imx_irqsteer_get_reg_index(data, hwirq); > > > unsigned long irqmap; > > > int pos, virq; > > > > > + if (hwirq >= data->reg_num * 32) > > > + break; > > + > > > irqmap = readl_relaxed(data->regs + > > > CHANSTATUS(idx, data->reg_num)); > > > > > for_each_set_bit(pos, &irqmap, 32) { > > > - virq = irq_find_mapping(data->domain, pos + i); > > + virq = irq_find_mapping(data->domain, pos + hwirq); > > The irq index calculation need to be "pos + i * 32 + hwirq", otherwise > this will map to the wrong virqs for the second register in each group. > For second register map, hwirq will plus 32 in next round. So i can't see this will map a wrong virqs. And it looks to me ""pos + i * 32 + hwirq" is equal to "hwirq + 32". Am i missed something? > > if (virq) > > > generic_handle_irq(virq); > > > } > > + hwirq += 32; > > Could be folded into the loop head. > You mean “for (i = 0; i < 2; i++, hwirq +=32)” ? I feel that's not quite necessary. > > } > > > > > chained_irq_exit(irq_desc_get_chip(desc), desc); > > @@ -117,7 +140,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > > struct device_node *np = pdev->dev.of_node; > > > struct irqsteer_data *data; > > > struct resource *res; > > > - int ret; > > > + u32 irqs_num; > > > + int i, ret; > > > > > data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); > > > if (!data) > > @@ -130,12 +154,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > > return PTR_ERR(data->regs); > > > } > > > > > - data->irq = platform_get_irq(pdev, 0); > > > - if (data->irq <= 0) { > > > - dev_err(&pdev->dev, "failed to get irq\n"); > > > - return -ENODEV; > > > - } > > - > > > data->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); > > > if (IS_ERR(data->ipg_clk)) { > > > ret = PTR_ERR(data->ipg_clk); > > @@ -146,11 +164,17 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > > > > raw_spin_lock_init(&data->lock); > > > > > - of_property_read_u32(np, "fsl,num-irqs", &data->reg_num); > > > + of_property_read_u32(np, "fsl,num-irqs", &irqs_num); > > > of_property_read_u32(np, "fsl,channel", &data->channel); > > > > > - /* one register bit map represents 32 input interrupts */ > > > - data->reg_num /= 32; > > > + /* > > + * There is one output irqs for each group of 64 inputs. > > "irq", singular. > Got it > > + * One register bit map can represent 32 input interrupts. > > > + */ > > > + data->irq_count = irqs_num / 64; > > > + if (irqs_num % 64) > > + data->irq_count += 1; > > This is a weird way of writing DIV_ROUND_UP. > Good suggestion > > + data->reg_num = irqs_num / 32; > > > > > if (IS_ENABLED(CONFIG_PM_SLEEP)) { > > > data->saved_reg = devm_kzalloc(&pdev->dev, > > @@ -177,8 +201,22 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > > return -ENOMEM; > > > } > > > > > - irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler, > > > - data); > > > + if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) { > > > + clk_disable_unprepare(data->ipg_clk); > > > + return -EINVAL; > > > + } > > + > > > + for (i = 0; i < data->irq_count; i++) { > > > + data->irq[i] = irq_of_parse_and_map(np, i); > > > + if (!data->irq[i]) { > > > + clk_disable_unprepare(data->ipg_clk); > > + return -EINVAL; > > With a lot of failure paths now replicating the clk_disable_unprepare, > return error, I think this warrants a common cleanup path that all > those paths could reach via simple goto. > Sound goods to me Regards Dong Aisheng > > + } > > + > > > + irq_set_chained_handler_and_data(data->irq[i], > > > + imx_irqsteer_irq_handler, > > > + data); > > > + } > > > > > platform_set_drvdata(pdev, data); > > > > @@ -188,8 +226,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev) > > static int imx_irqsteer_remove(struct platform_device *pdev) > > { > > > struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev); > > > + int i; > > + > > > + for (i = 0; i < irqsteer_data->irq_count; i++) > > > + irq_set_chained_handler_and_data(irqsteer_data->irq[i], > > > + NULL, NULL); > > > > > - irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL); > > > irq_domain_remove(irqsteer_data->domain); > > > > > clk_disable_unprepare(irqsteer_data->ipg_clk);
Am Mittwoch, den 30.01.2019, 22:03 +0800 schrieb Dong Aisheng: > > On Wed, Jan 30, 2019 at 9:33 PM Lucas Stach <l.stach@pengutronix.de> wrote: > > > > Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong: > > > One irqsteer channel can support up to 8 output interrupts. > > > > > > > > > > > Cc: Marc Zyngier <marc.zyngier@arm.com> > > > > > > > > Cc: Lucas Stach <l.stach@pengutronix.de> > > > > > > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > > > --- > > > ChangeLog: > > > v1->v2: > > > * calculate irq_count by fsl,num-irqs instead of parsing interrupts > > > property from devicetree to match the input interrupts and outputs > > > * improve output interrupt handler by searching only two registers > > > withint the same group > > > --- > > > drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++--------- > > > 1 file changed, 59 insertions(+), 17 deletions(-) > > > > > > diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c > > > index 67ed862..cc40039 100644 > > > --- a/drivers/irqchip/irq-imx-irqsteer.c > > > +++ b/drivers/irqchip/irq-imx-irqsteer.c > > > @@ -10,6 +10,7 @@ > > > #include <linux/irqchip/chained_irq.h> > > > #include <linux/irqdomain.h> > > > #include <linux/kernel.h> > > > +#include <linux/of_irq.h> > > > #include <linux/of_platform.h> > > > #include <linux/spinlock.h> > > > > > > @@ -21,10 +22,13 @@ > > > > #define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4) > > > > #define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8) > > > > +#define CHAN_MAX_OUTPUT_INT 0x8 > > > > > > + > > > struct irqsteer_data { > > > > > void __iomem *regs; > > > > > struct clk *ipg_clk; > > > > > - int irq; > > > > > + int irq[CHAN_MAX_OUTPUT_INT]; > > > > > + int irq_count; > > > > > raw_spinlock_t lock; > > > > > int reg_num; > > > > > int channel; > > > > > > @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = { > > > > > .xlate = irq_domain_xlate_onecell, > > > > > > }; > > > > > > +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq) > > > +{ > > > > + int i; > > > > > > + > > > > + for (i = 0; i < data->irq_count; i++) { > > > > + if (data->irq[i] == irq) > > > > > > + break; > > > > return i * 64; here... > > > + } > > > + > > > + return i * 64; > > > > ... and -EINVAL or something here, so we don't return a out of bounds > > hwirq base if the loop ever doesn't match something? > > > > Good suggestion, will add it. > > > > +} > > > + > > > static void imx_irqsteer_irq_handler(struct irq_desc *desc) > > > { > > > > struct irqsteer_data *data = irq_desc_get_handler_data(desc); > > > > + int hwirq; > > > > int i; > > > > chained_irq_enter(irq_desc_get_chip(desc), desc); > > > > - for (i = 0; i < data->reg_num * 32; i += 32) { > > > > - int idx = imx_irqsteer_get_reg_index(data, i); > > > > + hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc)); > > > > > > + > > > > + for (i = 0; i < 2; i++) { > > > > + int idx = imx_irqsteer_get_reg_index(data, hwirq); > > > > unsigned long irqmap; > > > > int pos, virq; > > > > + if (hwirq >= data->reg_num * 32) > > > > + break; > > > > > > + > > > > irqmap = readl_relaxed(data->regs + > > > > CHANSTATUS(idx, data->reg_num)); > > > > for_each_set_bit(pos, &irqmap, 32) { > > > > - virq = irq_find_mapping(data->domain, pos + i); > > > > > > + virq = irq_find_mapping(data->domain, pos + hwirq); > > > > The irq index calculation need to be "pos + i * 32 + hwirq", otherwise > > this will map to the wrong virqs for the second register in each group. > > > > For second register map, hwirq will plus 32 in next round. > So i can't see this will map a wrong virqs. > And it looks to me ""pos + i * 32 + hwirq" is equal to "hwirq + 32". > Am i missed something? You are right, I forgot about the hwirq being incremented in the loop when writing this comment. > > > if (virq) > > > > generic_handle_irq(virq); > > > > } > > > > > > + hwirq += 32; > > > > Could be folded into the loop head. > > > > You mean “for (i = 0; i < 2; i++, hwirq +=32)” ? > I feel that's not quite necessary. I personally find that quite a bit clearer than incrementing the loop variables at different spots. And I probably wouldn't have missed hwirq being incremented in the loop if I had seen it in the head. Regards, Lucas
diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c index 67ed862..cc40039 100644 --- a/drivers/irqchip/irq-imx-irqsteer.c +++ b/drivers/irqchip/irq-imx-irqsteer.c @@ -10,6 +10,7 @@ #include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/spinlock.h> @@ -21,10 +22,13 @@ #define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4) #define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8) +#define CHAN_MAX_OUTPUT_INT 0x8 + struct irqsteer_data { void __iomem *regs; struct clk *ipg_clk; - int irq; + int irq[CHAN_MAX_OUTPUT_INT]; + int irq_count; raw_spinlock_t lock; int reg_num; int channel; @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = { .xlate = irq_domain_xlate_onecell, }; +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq) +{ + int i; + + for (i = 0; i < data->irq_count; i++) { + if (data->irq[i] == irq) + break; + } + + return i * 64; +} + static void imx_irqsteer_irq_handler(struct irq_desc *desc) { struct irqsteer_data *data = irq_desc_get_handler_data(desc); + int hwirq; int i; chained_irq_enter(irq_desc_get_chip(desc), desc); - for (i = 0; i < data->reg_num * 32; i += 32) { - int idx = imx_irqsteer_get_reg_index(data, i); + hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc)); + + for (i = 0; i < 2; i++) { + int idx = imx_irqsteer_get_reg_index(data, hwirq); unsigned long irqmap; int pos, virq; + if (hwirq >= data->reg_num * 32) + break; + irqmap = readl_relaxed(data->regs + CHANSTATUS(idx, data->reg_num)); for_each_set_bit(pos, &irqmap, 32) { - virq = irq_find_mapping(data->domain, pos + i); + virq = irq_find_mapping(data->domain, pos + hwirq); if (virq) generic_handle_irq(virq); } + hwirq += 32; } chained_irq_exit(irq_desc_get_chip(desc), desc); @@ -117,7 +140,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct irqsteer_data *data; struct resource *res; - int ret; + u32 irqs_num; + int i, ret; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -130,12 +154,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev) return PTR_ERR(data->regs); } - data->irq = platform_get_irq(pdev, 0); - if (data->irq <= 0) { - dev_err(&pdev->dev, "failed to get irq\n"); - return -ENODEV; - } - data->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(data->ipg_clk)) { ret = PTR_ERR(data->ipg_clk); @@ -146,11 +164,17 @@ static int imx_irqsteer_probe(struct platform_device *pdev) raw_spin_lock_init(&data->lock); - of_property_read_u32(np, "fsl,num-irqs", &data->reg_num); + of_property_read_u32(np, "fsl,num-irqs", &irqs_num); of_property_read_u32(np, "fsl,channel", &data->channel); - /* one register bit map represents 32 input interrupts */ - data->reg_num /= 32; + /* + * There is one output irqs for each group of 64 inputs. + * One register bit map can represent 32 input interrupts. + */ + data->irq_count = irqs_num / 64; + if (irqs_num % 64) + data->irq_count += 1; + data->reg_num = irqs_num / 32; if (IS_ENABLED(CONFIG_PM_SLEEP)) { data->saved_reg = devm_kzalloc(&pdev->dev, @@ -177,8 +201,22 @@ static int imx_irqsteer_probe(struct platform_device *pdev) return -ENOMEM; } - irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler, - data); + if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) { + clk_disable_unprepare(data->ipg_clk); + return -EINVAL; + } + + for (i = 0; i < data->irq_count; i++) { + data->irq[i] = irq_of_parse_and_map(np, i); + if (!data->irq[i]) { + clk_disable_unprepare(data->ipg_clk); + return -EINVAL; + } + + irq_set_chained_handler_and_data(data->irq[i], + imx_irqsteer_irq_handler, + data); + } platform_set_drvdata(pdev, data); @@ -188,8 +226,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev) static int imx_irqsteer_remove(struct platform_device *pdev) { struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < irqsteer_data->irq_count; i++) + irq_set_chained_handler_and_data(irqsteer_data->irq[i], + NULL, NULL); - irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL); irq_domain_remove(irqsteer_data->domain); clk_disable_unprepare(irqsteer_data->ipg_clk);
One irqsteer channel can support up to 8 output interrupts. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v1->v2: * calculate irq_count by fsl,num-irqs instead of parsing interrupts property from devicetree to match the input interrupts and outputs * improve output interrupt handler by searching only two registers withint the same group --- drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++--------- 1 file changed, 59 insertions(+), 17 deletions(-)