| Message ID | 1548866336-14765-5-git-send-email-fabrice.gasnier@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add nvmem support on STM32 | expand |
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 8bf1c17..9a7ac80 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1106,6 +1106,19 @@ status = "disabled"; }; + bsec: nvmem@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>;
Add & enable stm32 factory-programmed memory. Describe temperature sensor calibration cells. Non-volatile calibration data is made available by stm32mp157c bootrom in bsec_dataX registers. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> --- arch/arm/boot/dts/stm32mp157c.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)