| Message ID | 1550108915-574-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V4,1/2] arm64: dts: freescale: imx8qxp: add cpu opp table | expand |
On 14-02-19, 01:54, Anson Huang wrote: > Add i.MX8QXP CPU opp table to support cpufreq. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > --- > No change since V3. > --- > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > index 4021f25..593e2db 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > @@ -34,6 +34,10 @@ > reg = <0x0 0x0>; > enable-method = "psci"; > next-level-cache = <&A35_L2>; > + clocks = <&clk IMX_A35_CLK>; > + clock-latency = <61036>; Who uses this value ? And why is it different from the one mentioned in the OPP table ? > + #cooling-cells = <2>; clocks and cooling-cells must be defined for all the CPUs. > + operating-points-v2 = <&a35_0_opp_table>; > }; > > A35_1: cpu@1 { > @@ -42,6 +46,7 @@ > reg = <0x0 0x1>; > enable-method = "psci"; > next-level-cache = <&A35_L2>; > + operating-points-v2 = <&a35_0_opp_table>; > }; > > A35_2: cpu@2 { > @@ -50,6 +55,7 @@ > reg = <0x0 0x2>; > enable-method = "psci"; > next-level-cache = <&A35_L2>; > + operating-points-v2 = <&a35_0_opp_table>; > }; > > A35_3: cpu@3 { > @@ -58,6 +64,7 @@ > reg = <0x0 0x3>; > enable-method = "psci"; > next-level-cache = <&A35_L2>; > + operating-points-v2 = <&a35_0_opp_table>; > }; > > A35_L2: l2-cache0 { > @@ -65,6 +72,24 @@ > }; > }; > > + a35_0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <1000000>; > + clock-latency-ns = <150000>; > + }; > + > + opp-1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1100000>; > + clock-latency-ns = <150000>; > + opp-suspend; You want to go to a higher frequency on suspend ? > + }; > + }; > + > gic: interrupt-controller@51a00000 { > compatible = "arm,gic-v3"; > reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > -- > 2.7.4
Hi, Viresh Best Regards! Anson Huang > -----Original Message----- > From: Viresh Kumar [mailto:viresh.kumar@linaro.org] > Sent: 2019年2月14日 15:13 > To: Anson Huang <anson.huang@nxp.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; > s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; > mturquette@baylibre.com; sboyd@kernel.org; Aisheng Dong > <aisheng.dong@nxp.com>; Daniel Baluta <daniel.baluta@nxp.com>; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > kernel@vger.kernel.org; linux-clk@vger.kernel.org; dl-linux-imx <linux- > imx@nxp.com> > Subject: Re: [PATCH V4 1/2] arm64: dts: freescale: imx8qxp: add cpu opp > table > > On 14-02-19, 01:54, Anson Huang wrote: > > Add i.MX8QXP CPU opp table to support cpufreq. > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > --- > > No change since V3. > > --- > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 25 > > +++++++++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > index 4021f25..593e2db 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > @@ -34,6 +34,10 @@ > > reg = <0x0 0x0>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + clocks = <&clk IMX_A35_CLK>; > > + clock-latency = <61036>; > > Who uses this value ? And why is it different from the one mentioned in the > OPP table ? Sorry, forgot to remove it. Will remove it in next version. > > > + #cooling-cells = <2>; > > clocks and cooling-cells must be defined for all the CPUs. OK. > > > + operating-points-v2 = <&a35_0_opp_table>; > > }; > > > > A35_1: cpu@1 { > > @@ -42,6 +46,7 @@ > > reg = <0x0 0x1>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > }; > > > > A35_2: cpu@2 { > > @@ -50,6 +55,7 @@ > > reg = <0x0 0x2>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > }; > > > > A35_3: cpu@3 { > > @@ -58,6 +64,7 @@ > > reg = <0x0 0x3>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > }; > > > > A35_L2: l2-cache0 { > > @@ -65,6 +72,24 @@ > > }; > > }; > > > > + a35_0_opp_table: opp-table { > > + compatible = "operating-points-v2"; > > + opp-shared; > > + > > + opp-900000000 { > > + opp-hz = /bits/ 64 <900000000>; > > + opp-microvolt = <1000000>; > > + clock-latency-ns = <150000>; > > + }; > > + > > + opp-1200000000 { > > + opp-hz = /bits/ 64 <1200000000>; > > + opp-microvolt = <1100000>; > > + clock-latency-ns = <150000>; > > + opp-suspend; > > You want to go to a higher frequency on suspend ? Yes, on most of i.MX SoCs, we always use highest frequency for suspend to reduce the suspend/resume latency. Thanks, Anson. > > > + }; > > + }; > > + > > gic: interrupt-controller@51a00000 { > > compatible = "arm,gic-v3"; > > reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > > -- > > 2.7.4 > > -- > viresh
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 4021f25..593e2db 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -34,6 +34,10 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + clock-latency = <61036>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_0_opp_table>; }; A35_1: cpu@1 { @@ -42,6 +46,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + operating-points-v2 = <&a35_0_opp_table>; }; A35_2: cpu@2 { @@ -50,6 +55,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + operating-points-v2 = <&a35_0_opp_table>; }; A35_3: cpu@3 { @@ -58,6 +64,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + operating-points-v2 = <&a35_0_opp_table>; }; A35_L2: l2-cache0 { @@ -65,6 +72,24 @@ }; }; + a35_0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + gic: interrupt-controller@51a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
Add i.MX8QXP CPU opp table to support cpufreq. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- No change since V3. --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)