diff mbox series

[v3,07/12] soc: mediatek: cmdq: clear the event in cmdq initial flow

Message ID 1553739573-19708-8-git-send-email-bibby.hsieh@mediatek.com
State New, archived
Headers show
Series support gce on mt8183 platform | expand

Commit Message

Bibby Hsieh March 28, 2019, 2:19 a.m. UTC
GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 6db1e2d..4e744cf 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -33,6 +33,7 @@ 
 #define CMDQ_THR_END_ADDR		0x24
 #define CMDQ_THR_WAIT_TOKEN		0x30
 #define CMDQ_THR_PRIORITY		0x40
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -103,8 +104,12 @@  static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb7342..911475da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@ 
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13..4e88999 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@ 
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {