diff mbox series

ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2

Message ID 1553854406-28992-1-git-send-email-yannick.fertre@st.com (mailing list archive)
State Mainlined, archived
Commit 81987fff52f1a5fba8fe814029e37961aaf77ee9
Headers show
Series ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 | expand

Commit Message

Yannick FERTRE March 29, 2019, 10:13 a.m. UTC
This patch adds a new property (power-supply) to panel otm8009a (orisetech)
on stm32mp157c-dk2  & regulator v3v3 which is always set on until the
implementation of regulator driver.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157c-dk2.dts | 1 +
 1 file changed, 1 insertion(+)

Comments

Alexandre TORGUE April 10, 2019, 1:54 p.m. UTC | #1
Hi Yannick

On 3/29/19 11:13 AM, Yannick Fertré wrote:
> This patch adds a new property (power-supply) to panel otm8009a (orisetech)
> on stm32mp157c-dk2  & regulator v3v3 which is always set on until the
> implementation of regulator driver.
> 
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
>   arch/arm/boot/dts/stm32mp157c-dk2.dts | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
> index 363aeb9..20ea601 100644
> --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
> @@ -50,6 +50,7 @@
>   		compatible = "orisetech,otm8009a";
>   		reg = <0>;
>   		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
> +		power-supply = <&v3v3>;
>   		status = "okay";
>   
>   		port {
> 

Applied on stm32-next. I just updated the commit message as regulator 
fixed hook is no more used due to stpmic1 merge.

Thanks.
Alex
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 363aeb9..20ea601 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -50,6 +50,7 @@ 
 		compatible = "orisetech,otm8009a";
 		reg = <0>;
 		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
 		status = "okay";
 
 		port {