diff mbox series

[v3,2/4] lib: logic_pio: Use logical PIO low-level accessors for !CONFIG_INDIRECT_PIO

Message ID 1554393602-152448-3-git-send-email-john.garry@huawei.com (mailing list archive)
State New, archived
Headers show
Series Fix system crash for accessing unmapped IO port regions | expand

Commit Message

John Garry April 4, 2019, 4 p.m. UTC
Currently we only use logical PIO low-level accessors for when
CONFIG_INDIRECT_PIO is enabled.

Otherwise we just use inb/out et all directly.

It is useful to now use logical PIO accessors for all cases, so we can add
legality checks to accesses. Such a check would be for ensuring that the
PCI IO port has been IO remapped prior to the access.

Using the logical PIO accesses will add a little processing overhead, but
that's ok as IO port accesses are relatively slow anyway.

Some changes are also made to stop spilling so many lines under
CONFIG_INDIRECT_PIO.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 include/linux/logic_pio.h |  7 +++--
 lib/logic_pio.c           | 61 ++++++++++++++++++++++++++++++---------
 2 files changed, 52 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
index cbd9d8495690..06d22b2ec99f 100644
--- a/include/linux/logic_pio.h
+++ b/include/linux/logic_pio.h
@@ -37,7 +37,7 @@  struct logic_pio_host_ops {
 		     size_t dwidth, unsigned int count);
 };
 
-#ifdef CONFIG_INDIRECT_PIO
+#if defined(PCI_IOBASE)
 u8 logic_inb(unsigned long addr);
 void logic_outb(u8 value, unsigned long addr);
 void logic_outw(u16 value, unsigned long addr);
@@ -102,6 +102,7 @@  void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
 #define outsl logic_outsl
 #endif
 
+#if defined(CONFIG_INDIRECT_PIO)
 /*
  * We reserve 0x4000 bytes for Indirect IO as so far this library is only
  * used by the HiSilicon LPC Host. If needed, we can reserve a wider IO
@@ -109,10 +110,10 @@  void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
  */
 #define PIO_INDIRECT_SIZE 0x4000
 #define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)
-#else
+#else /* CONFIG_INDIRECT_PIO */
 #define MMIO_UPPER_LIMIT IO_SPACE_LIMIT
 #endif /* CONFIG_INDIRECT_PIO */
-
+#endif /* PCI_IOBASE */
 struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
 unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
 			resource_size_t hw_addr, resource_size_t size);
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index feea48fd1a0d..431cd8d99236 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -191,7 +191,8 @@  unsigned long logic_pio_trans_cpuaddr(resource_size_t addr)
 	return ~0UL;
 }
 
-#if defined(CONFIG_INDIRECT_PIO) && defined(PCI_IOBASE)
+#if defined(PCI_IOBASE)
+#if defined(CONFIG_INDIRECT_PIO)
 #define BUILD_LOGIC_IO(bw, type)					\
 type logic_in##bw(unsigned long addr)					\
 {									\
@@ -201,10 +202,10 @@  type logic_in##bw(unsigned long addr)					\
 		ret = read##bw(PCI_IOBASE + addr);			\
 	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
 		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+		size_t sz = sizeof(type);				\
 									\
 		if (entry && entry->ops)				\
-			ret = entry->ops->in(entry->hostdata,		\
-					addr, sizeof(type));		\
+			ret = entry->ops->in(entry->hostdata, addr, sz);\
 		else							\
 			WARN_ON_ONCE(1);				\
 	}								\
@@ -217,48 +218,82 @@  void logic_out##bw(type value, unsigned long addr)			\
 		write##bw(value, PCI_IOBASE + addr);			\
 	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
 		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+		size_t sz = sizeof(type);				\
 									\
 		if (entry && entry->ops)				\
 			entry->ops->out(entry->hostdata,		\
-					addr, value, sizeof(type));	\
+					addr, value, sz);		\
 		else							\
 			WARN_ON_ONCE(1);				\
 	}								\
 }									\
 									\
-void logic_ins##bw(unsigned long addr, void *buffer,		\
-		   unsigned int count)					\
+void logic_ins##bw(unsigned long addr, void *buf, unsigned int cnt)	\
 {									\
 	if (addr < MMIO_UPPER_LIMIT) {					\
-		reads##bw(PCI_IOBASE + addr, buffer, count);		\
+		reads##bw(PCI_IOBASE + addr, buf, cnt);			\
 	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
 		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+		size_t sz = sizeof(type);				\
 									\
 		if (entry && entry->ops)				\
 			entry->ops->ins(entry->hostdata,		\
-				addr, buffer, sizeof(type), count);	\
+				addr, buf, sz, cnt);			\
 		else							\
 			WARN_ON_ONCE(1);				\
 	}								\
 									\
 }									\
 									\
-void logic_outs##bw(unsigned long addr, const void *buffer,		\
-		    unsigned int count)					\
+void logic_outs##bw(unsigned long addr, const void *buf,		\
+		    unsigned int cnt)					\
 {									\
 	if (addr < MMIO_UPPER_LIMIT) {					\
-		writes##bw(PCI_IOBASE + addr, buffer, count);		\
+		writes##bw(PCI_IOBASE + addr, buf, cnt);		\
 	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
 		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+		size_t sz = sizeof(type);				\
 									\
 		if (entry && entry->ops)				\
 			entry->ops->outs(entry->hostdata,		\
-				addr, buffer, sizeof(type), count);	\
+				addr, buf, sz, cnt);			\
 		else							\
 			WARN_ON_ONCE(1);				\
 	}								\
 }
 
+#else /* CONFIG_INDIRECT_PIO */
+
+#define BUILD_LOGIC_IO(bw, type)					\
+type logic_in##bw(unsigned long addr)					\
+{									\
+	type ret = (type)~0;						\
+									\
+	if (addr < MMIO_UPPER_LIMIT)					\
+		ret = read##bw(PCI_IOBASE + addr);			\
+	return ret;							\
+}									\
+									\
+void logic_out##bw(type value, unsigned long addr)			\
+{									\
+	if (addr < MMIO_UPPER_LIMIT)					\
+		write##bw(value, PCI_IOBASE + addr);			\
+}									\
+									\
+void logic_ins##bw(unsigned long addr, void *buf, unsigned int cnt)	\
+{									\
+	if (addr < MMIO_UPPER_LIMIT)					\
+		reads##bw(PCI_IOBASE + addr, buf, cnt);			\
+}									\
+									\
+void logic_outs##bw(unsigned long addr, const void *buf,		\
+		    unsigned int cnt)					\
+{									\
+	if (addr < MMIO_UPPER_LIMIT)					\
+		writes##bw(PCI_IOBASE + addr, buf, cnt);		\
+}
+#endif /* CONFIG_INDIRECT_PIO */
+
 BUILD_LOGIC_IO(b, u8)
 EXPORT_SYMBOL(logic_inb);
 EXPORT_SYMBOL(logic_insb);
@@ -277,4 +312,4 @@  EXPORT_SYMBOL(logic_insl);
 EXPORT_SYMBOL(logic_outl);
 EXPORT_SYMBOL(logic_outsl);
 
-#endif /* CONFIG_INDIRECT_PIO && PCI_IOBASE */
+#endif /* PCI_IOBASE */