diff mbox series

[v4,6/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies

Message ID 1555600282-9405-7-git-send-email-pgreco@centosproject.org (mailing list archive)
State New, archived
Headers show
Series ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra | expand

Commit Message

Pablo Sebastián Greco April 18, 2019, 3:11 p.m. UTC 
The bananapi-m2-berry has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs, tie them to the pio
node.

Signed-off-by: Pablo Greco <pgreco@centosproject.org>
---
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Maxime Ripard April 18, 2019, 3:54 p.m. UTC | #1 
Hi,

On Thu, Apr 18, 2019 at 12:11:21PM -0300, Pablo Greco wrote:
> The bananapi-m2-berry has the PMIC providing voltage to all the pin-bank
> supply rails from its various regulator outputs, tie them to the pio
> node.
>
> Signed-off-by: Pablo Greco <pgreco@centosproject.org>

This one and the patch 7 should be the first patch in your series

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 3d0bb7e..f33705a 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -176,6 +176,12 @@ 
 &pio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
 };
 
 &reg_aldo2 {