diff mbox series

[v3,3/3] thermal: rockchip: Support the PX30 SoC in thermal driver

Message ID 1556618986-18923-4-git-send-email-zhangqing@rock-chips.com (mailing list archive)
State Mainlined, archived
Commit ffd1b122d3a17783b68cfd03b0479dffedf0d960
Headers show
Series thermal: rockchip: fix up thermal driver | expand

Commit Message

zhangqing April 30, 2019, 10:09 a.m. UTC
PX30 SOC has two Temperature Sensors for CPU and GPU.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/thermal/rockchip_thermal.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
diff mbox series

Patch

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 6dc7fc516abf..bda1ca199abd 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -225,11 +225,15 @@  struct rockchip_thermal_data {
 #define GRF_TSADC_TESTBIT_L			0x0e648
 #define GRF_TSADC_TESTBIT_H			0x0e64c
 
+#define PX30_GRF_SOC_CON2			0x0408
+
 #define GRF_SARADC_TESTBIT_ON			(0x10001 << 2)
 #define GRF_TSADC_TESTBIT_H_ON			(0x10001 << 2)
 #define GRF_TSADC_VCM_EN_L			(0x10001 << 7)
 #define GRF_TSADC_VCM_EN_H			(0x10001 << 7)
 
+#define GRF_CON_TSADC_CH_INV			(0x10001 << 1)
+
 /**
  * struct tsadc_table - code to temperature conversion table
  * @code: the value of adc channel
@@ -692,6 +696,13 @@  static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
 			       regs + TSADCV2_AUTO_CON);
 }
 
+static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	rk_tsadcv2_initialize(grf, regs, tshut_polarity);
+	regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -821,6 +832,30 @@  static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip px30_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* 2 channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv4_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rk3328_code_table,
+		.length = ARRAY_SIZE(rk3328_code_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
 	.chn_num = 1, /* one channel for tsadc */
@@ -993,6 +1028,9 @@  static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 };
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
+	{	.compatible = "rockchip,px30-tsadc",
+		.data = (void *)&px30_tsadc_data,
+	},
 	{
 		.compatible = "rockchip,rv1108-tsadc",
 		.data = (void *)&rv1108_tsadc_data,