@@ -70,6 +70,13 @@ config ARM_DSU_PMU
system, control logic. The PMU allows counting various events related
to DSU.
+config FSL_IMX8_DDR_PMU
+ tristate "Freescale i.MX8 DDR perf monitor"
+ depends on ARCH_MXC
+ help
+ Provides support for ddr perfomance monitor in i.MX8. Provide memory
+ througput information.
+
config HISI_PMU
bool "HiSilicon SoC PMU"
depends on ARM64 && ACPI
@@ -5,6 +5,7 @@ obj-$(CONFIG_ARM_DSU_PMU) += arm_dsu_pmu.o
obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
obj-$(CONFIG_ARM_SMMU_V3_PMU) += arm_smmuv3_pmu.o
+obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
obj-$(CONFIG_HISI_PMU) += hisilicon/
obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
new file mode 100644
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 NXP
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/perf_event.h>
+#include <linux/slab.h>
+
+#define COUNTER_CNTL 0x0
+#define COUNTER_READ 0x20
+
+#define COUNTER_DPCR1 0x30
+
+#define CNTL_OVER 0x1
+#define CNTL_CLEAR 0x2
+#define CNTL_EN 0x4
+#define CNTL_EN_MASK 0xFFFFFFFB
+#define CNTL_CLEAR_MASK 0xFFFFFFFD
+#define CNTL_OVER_MASK 0xFFFFFFFE
+
+#define CNTL_CSV_SHIFT 24
+#define CNTL_CSV_MASK (0xFF << CNTL_CSV_SHIFT)
+
+#define EVENT_CYCLES_ID 0
+#define EVENT_CYCLES_COUNTER 0
+#define NUM_COUNTERS 4
+
+#define to_ddr_pmu(p) container_of(p, struct ddr_pmu, pmu)
+
+#define DDR_PERF_DEV_NAME "imx8_ddr_perf_pmu"
+
+static DEFINE_IDA(ddr_ida);
+
+static const struct of_device_id imx_ddr_pmu_dt_ids[] = {
+ { .compatible = "fsl,imx8-ddr-pmu",},
+ { .compatible = "fsl,imx8m-ddr-pmu",},
+ { /* sentinel */ }
+};
+
+struct ddr_pmu {
+ struct pmu pmu;
+ void __iomem *base;
+ unsigned int cpu;
+ struct hlist_node node;
+ struct device *dev;
+ struct perf_event *events[NUM_COUNTERS];
+ int active_events;
+ enum cpuhp_state cpuhp_state;
+ int irq;
+ int id;
+};
+
+static ssize_t ddr_perf_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ddr_pmu *pmu = dev_get_drvdata(dev);
+
+ return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
+}
+
+static struct device_attribute ddr_perf_cpumask_attr =
+ __ATTR(cpumask, 0444, ddr_perf_cpumask_show, NULL);
+
+static struct attribute *ddr_perf_cpumask_attrs[] = {
+ &ddr_perf_cpumask_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ddr_perf_cpumask_attr_group = {
+ .attrs = ddr_perf_cpumask_attrs,
+};
+
+static ssize_t
+ddr_pmu_event_show(struct device *dev, struct device_attribute *attr,
+ char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+ return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+#define IMX8_DDR_PMU_EVENT_ATTR(_name, _id) \
+ (&((struct perf_pmu_events_attr[]) { \
+ { .attr = __ATTR(_name, 0444, ddr_pmu_event_show, NULL),\
+ .id = _id, } \
+ })[0].attr.attr)
+
+static struct attribute *ddr_perf_events_attrs[] = {
+ IMX8_DDR_PMU_EVENT_ATTR(cycles, EVENT_CYCLES_ID),
+ IMX8_DDR_PMU_EVENT_ATTR(selfresh, 0x01),
+ IMX8_DDR_PMU_EVENT_ATTR(read-accesses, 0x04),
+ IMX8_DDR_PMU_EVENT_ATTR(write-accesses, 0x05),
+ IMX8_DDR_PMU_EVENT_ATTR(read-queue-depth, 0x08),
+ IMX8_DDR_PMU_EVENT_ATTR(write-queue-depth, 0x09),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-read-credit-cnt, 0x10),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-read-credit-cnt, 0x11),
+ IMX8_DDR_PMU_EVENT_ATTR(write-credit-cnt, 0x12),
+ IMX8_DDR_PMU_EVENT_ATTR(read-command, 0x20),
+ IMX8_DDR_PMU_EVENT_ATTR(write-command, 0x21),
+ IMX8_DDR_PMU_EVENT_ATTR(read-modify-write-command, 0x22),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-read, 0x23),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-req-nocredit, 0x24),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-xact-credit, 0x25),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-req-nocredit, 0x26),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-xact-credit, 0x27),
+ IMX8_DDR_PMU_EVENT_ATTR(wr-xact-credit, 0x29),
+ IMX8_DDR_PMU_EVENT_ATTR(read-cycles, 0x2a),
+ IMX8_DDR_PMU_EVENT_ATTR(write-cycles, 0x2b),
+ IMX8_DDR_PMU_EVENT_ATTR(read-write-transition, 0x30),
+ IMX8_DDR_PMU_EVENT_ATTR(precharge, 0x31),
+ IMX8_DDR_PMU_EVENT_ATTR(activate, 0x32),
+ IMX8_DDR_PMU_EVENT_ATTR(load-mode, 0x33),
+ IMX8_DDR_PMU_EVENT_ATTR(perf-mwr, 0x34),
+ IMX8_DDR_PMU_EVENT_ATTR(read, 0x35),
+ IMX8_DDR_PMU_EVENT_ATTR(read-activate, 0x36),
+ IMX8_DDR_PMU_EVENT_ATTR(refresh, 0x37),
+ IMX8_DDR_PMU_EVENT_ATTR(write, 0x38),
+ IMX8_DDR_PMU_EVENT_ATTR(raw-hazard, 0x39),
+ NULL,
+};
+
+static struct attribute_group ddr_perf_events_attr_group = {
+ .name = "events",
+ .attrs = ddr_perf_events_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *ddr_perf_format_attrs[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+static struct attribute_group ddr_perf_format_attr_group = {
+ .name = "format",
+ .attrs = ddr_perf_format_attrs,
+};
+
+static const struct attribute_group *attr_groups[] = {
+ &ddr_perf_events_attr_group,
+ &ddr_perf_format_attr_group,
+ &ddr_perf_cpumask_attr_group,
+ NULL,
+};
+
+static u32 ddr_perf_alloc_counter(struct ddr_pmu *pmu, int event)
+{
+ int i;
+
+ /*
+ * Always map cycle event to counter 0
+ * Cycles counter is dedicated for cycle event
+ * can't used for the other events
+ */
+ if (event == EVENT_CYCLES_ID) {
+ if (pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ return EVENT_CYCLES_COUNTER;
+ else
+ return -ENOENT;
+ }
+
+ for (i = 1; i < NUM_COUNTERS; i++) {
+ if (pmu->events[i] == NULL)
+ return i;
+ }
+
+ return -ENOENT;
+}
+
+static void ddr_perf_free_counter(struct ddr_pmu *pmu, int counter)
+{
+ pmu->events[counter] = NULL;
+}
+
+static u32 ddr_perf_read_counter(struct ddr_pmu *pmu, int counter)
+{
+ return readl_relaxed(pmu->base + COUNTER_READ + counter * 4);
+}
+
+static int ddr_perf_event_init(struct perf_event *event)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_event *sibling;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+ return -EOPNOTSUPP;
+
+ if (event->cpu < 0) {
+ dev_warn(pmu->dev, "Can't provide per-task data!\n");
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * We must NOT create groups containing mixed PMUs, although software
+ * events are acceptable (for example to create a CCN group
+ * periodically read when a hrtimer aka cpu-clock leader triggers).
+ */
+ if (event->group_leader->pmu != event->pmu &&
+ !is_software_event(event->group_leader))
+ return -EINVAL;
+
+ for_each_sibling_event(sibling, event->group_leader) {
+ if (sibling->pmu != event->pmu &&
+ !is_software_event(sibling))
+ return -EINVAL;
+ }
+
+ event->cpu = pmu->cpu;
+ hwc->idx = -1;
+
+ return 0;
+}
+
+
+static void ddr_perf_event_update(struct perf_event *event)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ u64 delta, prev_raw_count, new_raw_count;
+ int counter = hwc->idx;
+
+ do {
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = ddr_perf_read_counter(pmu, counter);
+ } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count);
+
+ delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF;
+
+ local64_add(delta, &event->count);
+}
+
+static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
+ int counter, bool enable)
+{
+ u8 reg = counter * 4 + COUNTER_CNTL;
+ int val;
+
+ if (enable) {
+ /*
+ * must disable first, then enable again
+ * otherwise, cycle counter will not work
+ * if previous state is enabled.
+ */
+ writel(0, pmu->base + reg);
+ val = CNTL_EN | CNTL_CLEAR;
+ val |= FIELD_PREP(CNTL_CSV_MASK, config);
+ writel(val, pmu->base + reg);
+ } else {
+ /* Disable counter */
+ writel(0, pmu->base + reg);
+ }
+}
+
+static void ddr_perf_event_start(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ local64_set(&hwc->prev_count, 0);
+
+ ddr_perf_counter_enable(pmu, event->attr.config, counter, true);
+
+ hwc->state = 0;
+}
+
+static int ddr_perf_event_add(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter;
+ int cfg = event->attr.config;
+
+ counter = ddr_perf_alloc_counter(pmu, cfg);
+ if (counter < 0) {
+ dev_dbg(pmu->dev, "There are not enough counters\n");
+ return -EOPNOTSUPP;
+ }
+
+ pmu->events[counter] = event;
+ pmu->active_events++;
+ hwc->idx = counter;
+
+ hwc->state |= PERF_HES_STOPPED;
+
+ if (flags & PERF_EF_START)
+ ddr_perf_event_start(event, flags);
+
+ return 0;
+}
+
+static void ddr_perf_event_stop(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ ddr_perf_counter_enable(pmu, event->attr.config, counter, false);
+ ddr_perf_event_update(event);
+
+ hwc->state |= PERF_HES_STOPPED;
+}
+
+static void ddr_perf_event_del(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ ddr_perf_event_stop(event, PERF_EF_UPDATE);
+
+ ddr_perf_free_counter(pmu, counter);
+ pmu->active_events--;
+ hwc->idx = -1;
+}
+
+static void ddr_perf_pmu_enable(struct pmu *pmu)
+{
+ struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
+
+ /* enable cycle counter if cycle is not active event list */
+ if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ ddr_perf_counter_enable(ddr_pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ true);
+}
+
+static void ddr_perf_pmu_disable(struct pmu *pmu)
+{
+ struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
+
+ if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ ddr_perf_counter_enable(ddr_pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ false);
+}
+
+static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
+ struct device *dev)
+{
+ *pmu = (struct ddr_pmu) {
+ .pmu = (struct pmu) {
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ .task_ctx_nr = perf_invalid_context,
+ .attr_groups = attr_groups,
+ .event_init = ddr_perf_event_init,
+ .add = ddr_perf_event_add,
+ .del = ddr_perf_event_del,
+ .start = ddr_perf_event_start,
+ .stop = ddr_perf_event_stop,
+ .read = ddr_perf_event_update,
+ .pmu_enable = ddr_perf_pmu_enable,
+ .pmu_disable = ddr_perf_pmu_disable,
+ },
+ .base = base,
+ .dev = dev,
+ };
+
+ pmu->id = ida_simple_get(&ddr_ida, 0, 0, GFP_KERNEL);
+ return pmu->id;
+}
+
+static irqreturn_t ddr_perf_irq_handler(int irq, void *p)
+{
+ int i;
+ struct ddr_pmu *pmu = (struct ddr_pmu *) p;
+ struct perf_event *event, *cycle_event = NULL;
+
+ /* all counter will stop if cycle counter disabled */
+ ddr_perf_counter_enable(pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ false);
+ /*
+ * When the cycle counter overflows, all counters are stopped,
+ * and an IRQ is raised. If any other counter overflows, it
+ * continues counting, and no IRQ is raised.
+ *
+ * Cycles occur at least 4 times as often as other events, so we
+ * can update all events on a cycle counter overflow and not
+ * lose events.
+ *
+ */
+ for (i = 0; i < NUM_COUNTERS; i++) {
+
+ if (!pmu->events[i])
+ continue;
+
+ event = pmu->events[i];
+
+ ddr_perf_event_update(event);
+
+ if (event->hw.idx == EVENT_CYCLES_COUNTER)
+ cycle_event = event;
+ }
+
+ ddr_perf_counter_enable(pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ true);
+ if (cycle_event)
+ ddr_perf_event_update(cycle_event);
+
+ return IRQ_HANDLED;
+}
+
+static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
+ int target;
+
+ if (cpu != pmu->cpu)
+ return 0;
+
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target >= nr_cpu_ids)
+ return 0;
+
+ perf_pmu_migrate_context(&pmu->pmu, cpu, target);
+ pmu->cpu = target;
+
+ WARN_ON(irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu)));
+
+ return 0;
+}
+
+static int ddr_perf_probe(struct platform_device *pdev)
+{
+ struct ddr_pmu *pmu;
+ struct device_node *np;
+ void __iomem *base;
+ char *name;
+ int num;
+ int ret;
+ int irq;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ np = pdev->dev.of_node;
+
+ pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ num = ddr_perf_init(pmu, base, &pdev->dev);
+
+ platform_set_drvdata(pdev, pmu);
+
+ name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "imx_ddr%d", num);
+ if (!name)
+ return -ENOMEM;
+
+ pmu->cpu = raw_smp_processor_id();
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+ DDR_PERF_DEV_NAME,
+ NULL,
+ ddr_perf_offline_cpu);
+
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cpuhp_setup_state_multi failed\n");
+ goto ddr_perf_err;
+ }
+
+ pmu->cpuhp_state = ret;
+
+ /* Register the pmu instance for cpu hotplug */
+ cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+
+ /* Request irq */
+ irq = of_irq_get(np, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get irq: %d", irq);
+ ret = irq;
+ goto ddr_perf_err;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq,
+ ddr_perf_irq_handler,
+ IRQF_NOBALANCING | IRQF_NO_THREAD,
+ DDR_PERF_DEV_NAME,
+ pmu);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Request irq failed: %d", ret);
+ goto ddr_perf_err;
+ }
+
+ pmu->irq = irq;
+ ret = irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu));
+ if (ret) {
+ dev_err(pmu->dev, "Failed to set interrupt affinity!\n");
+ goto ddr_perf_err;
+ }
+
+ ret = perf_pmu_register(&pmu->pmu, name, -1);
+ if (ret)
+ goto ddr_perf_err;
+
+ return 0;
+
+ddr_perf_err:
+ if (pmu->cpuhp_state)
+ cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+
+ ida_simple_remove(&ddr_ida, pmu->id);
+ dev_warn(&pdev->dev, "i.MX8 DDR Perf PMU failed (%d), disabled\n", ret);
+ return ret;
+}
+
+static int ddr_perf_remove(struct platform_device *pdev)
+{
+ struct ddr_pmu *pmu = platform_get_drvdata(pdev);
+
+ cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+ irq_set_affinity_hint(pmu->irq, NULL);
+
+ perf_pmu_unregister(&pmu->pmu);
+
+ ida_simple_remove(&ddr_ida, pmu->id);
+ return 0;
+}
+
+static struct platform_driver imx_ddr_pmu_driver = {
+ .driver = {
+ .name = "imx-ddr-pmu",
+ .of_match_table = imx_ddr_pmu_dt_ids,
+ },
+ .probe = ddr_perf_probe,
+ .remove = ddr_perf_remove,
+};
+
+module_platform_driver(imx_ddr_pmu_driver);
+MODULE_LICENSE("GPL v2");
Add ddr performance monitor support for iMX8QXP There are 4 counters for ddr perfomance events. counter 0 is dedicated for cycles. you choose any up to 3 no cycles events. for example: perf stat -a -e imx_ddr0/read-cycles/,imx_ddr0/write-cycles/,imx_ddr0/precharge/ ls perf stat -a -e imx_ddr0/cycles/,imx_ddr0/read-access/,imx_ddr0/write-access/ ls Support below events. imx_ddr0/activate/ [Kernel PMU event] imx_ddr0/axid-read/ [Kernel PMU event] imx_ddr0/axid-write/ [Kernel PMU event] imx_ddr0/cycles/ [Kernel PMU event] imx_ddr0/hp-read-credit-cnt/ [Kernel PMU event] imx_ddr0/hp-read/ [Kernel PMU event] imx_ddr0/hp-req-nodcredit/ [Kernel PMU event] imx_ddr0/hp-xact-credit/ [Kernel PMU event] imx_ddr0/load-mode/ [Kernel PMU event] imx_ddr0/lp-read-credit-cnt/ [Kernel PMU event] imx_ddr0/lp-req-nocredit/ [Kernel PMU event] imx_ddr0/lp-xact-credit/ [Kernel PMU event] imx_ddr0/mwr/ [Kernel PMU event] imx_ddr0/precharge/ [Kernel PMU event] imx_ddr0/raw-hazard/ [Kernel PMU event] imx_ddr0/read-access/ [Kernel PMU event] imx_ddr0/read-activate/ [Kernel PMU event] imx_ddr0/read-command/ [Kernel PMU event] imx_ddr0/read-cycles/ [Kernel PMU event] imx_ddr0/read-modify-write-command/ [Kernel PMU event] imx_ddr0/read-queue-depth/ [Kernel PMU event] imx_ddr0/read-write-transition/ [Kernel PMU event] imx_ddr0/read/ [Kernel PMU event] imx_ddr0/refresh/ [Kernel PMU event] imx_ddr0/selfresh/ [Kernel PMU event] imx_ddr0/wr-xact-credit/ [Kernel PMU event] imx_ddr0/write-access/ [Kernel PMU event] imx_ddr0/write-command/ [Kernel PMU event] imx_ddr0/write-credit-cnt/ [Kernel PMU event] imx_ddr0/write-cycles/ [Kernel PMU event] imx_ddr0/write-queue-depth/ [Kernel PMU event] imx_ddr0/write/ Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: Change from v10 to v11 * using devm_platform_ioremap_resource * using help macro IMX8_DDR_PMU_EVENT_ATTR Change from v9 to v10 * use name imx8_ddr_perf_pmu * cpuhp_setup_state_multi use DDR_PERF_DEV_NAME * config: 0-7 * use read_relaxed() at ddr_perf_read_counter * add .capabilities = PERF_PMU_CAP_NO_EXCLUDE * raname ddr_perf_event_start to ddr_perf_counter_enable * use FIELD_PREP * write 0 to disalbe counter at ddr_perf_event_enable * update hwc->state * remove local64_set at ddr_perf_event_add * move perf_pmu_register after irq_register to simplfy err handle No change from v8 to v9 Change from v7 to v8 * remove unused define * change total_events to active_events, change active_events to events * remove flags, * fix multi line comments code sytle * add pmu_enable\disable function * disable event at irq handle * remove counter check at ddr_perf_free_counter * remove pmu->irq check * add group check Change from v6 to v7 * added irq affinity handle, ref arm-ccn.c * added IRQF_NOBALANCING | IRQF_NO_THREAD * added ida_simple_remove at failure path Change from v5 to v6 * fix insmod\rmmod problem * remove randunt register read at irq handle * change u32 irq to int * devm_request_irq use default flags. Change from v4 to v5 * Remove AXI ID filter function Change from v3 to v4 * Change FSL_IMX8_DDR_PERF to FSL_IMX8_DDR_PMU * sort include * remove struct fsl_ddr_devtype_data * Added comment need disable control first * Added comment about must enable cycle counter * Added macro for EVENT_AXI_READ, remove hardcode 0x41 and 0x42 * Added comment about cycle counter is fastest one Change from v2 to v3 * remove kfree Change from V1 to V2 * update Kconfig by use i.MX8 instead of i.MX8 QXP * remove gpl statememnt since SPDX tag * use dev_kzalloc * use dev_err * commit message show axi_read 0x41\axi_write 0x42 * commit message show cycles must be enabled * Irq only issue at cycles overflow * use NUM_COUNTER * use devm_request_irq * add hotplug callback to handle context migration drivers/perf/Kconfig | 7 + drivers/perf/Makefile | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 552 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 560 insertions(+) create mode 100644 drivers/perf/fsl_imx8_ddr_perf.c