| Message ID | 1557912988-26758-3-git-send-email-stanley.chu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | scsi: ufs: Add error handling of Auto-Hibernate | expand |
Hi, Stanley Thanks for update. >Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bean Huo <beanhuo@micron.com> >2.18.0
Hi Stanley, On 5/15/19 3:06 PM, Stanley Chu wrote: > Currently auto-hibernate is activated if host supports > auto-hibern8 capability. However error-handling is not implemented, > which makes the feature somewhat risky. > > If either "Hibernate Enter" or "Hibernate Exit" fail during > auto-hibernate flow, the corresponding interrupt > "UIC_HIBERNATE_ENTER" or "UIC_HIBERNATE_EXIT" shall be raised > according to UFS specification. > > This patch adds auto-hibernate error-handling: > > - Monitor "Hibernate Enter" and "Hibernate Exit" interrupts after > auto-hibernate feature is activated. > > - If fail happens, trigger error-handling just like "manual-hibernate" > fail and apply the same recovery flow: schedule UFS error handler in > ufshcd_check_errors(), and then do host reset and restore > in UFS error handler. > > Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> > --- > drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++ > drivers/scsi/ufs/ufshcd.h | 5 +++++ > drivers/scsi/ufs/ufshci.h | 3 +++ > 3 files changed, 39 insertions(+) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 1665820c22fd..e6a86223a0d4 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -5254,6 +5254,7 @@ static void ufshcd_err_handler(struct work_struct *work) > goto skip_err_handling; > } > if ((hba->saved_err & INT_FATAL_ERRORS) || > + (hba->saved_err & UFSHCD_UIC_AH8_ERROR_MASK) || > ((hba->saved_err & UIC_ERROR) && > (hba->saved_uic_err & (UFSHCD_UIC_DL_PA_INIT_ERROR | > UFSHCD_UIC_DL_NAC_RECEIVED_ERROR | > @@ -5413,6 +5414,23 @@ static void ufshcd_update_uic_error(struct ufs_hba *hba) > __func__, hba->uic_error); > } > > +static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba, > + u32 intr_mask) > +{ > + if (!ufshcd_is_auto_hibern8_supported(hba)) > + return false; > + > + if (!(intr_mask & UFSHCD_UIC_AH8_ERROR_MASK)) > + return false; > + > + if (hba->active_uic_cmd && > + (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER || > + hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT)) > + return false; > + > + return true; > +} > + > /** > * ufshcd_check_errors - Check for errors that need s/w attention > * @hba: per-adapter instance > @@ -5431,6 +5449,15 @@ static void ufshcd_check_errors(struct ufs_hba *hba) > queue_eh_work = true; > } > > + if (hba->errors & UFSHCD_UIC_AH8_ERROR_MASK) { > + dev_err(hba->dev, > + "%s: Auto Hibern8 %s failed - status: 0x%08x, upmcrs: 0x%08x\n", > + __func__, (hba->errors & UIC_HIBERNATE_ENTER) ? > + "Enter" : "Exit", > + hba->errors, ufshcd_get_upmcrs(hba)); > + queue_eh_work = true; > + } > + > if (queue_eh_work) { > /* > * update the transfer error masks to sticky bits, let's do this > @@ -5493,6 +5520,10 @@ static void ufshcd_tmc_handler(struct ufs_hba *hba) > static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) > { > hba->errors = UFSHCD_ERROR_MASK & intr_status; > + > + if (ufshcd_is_auto_hibern8_error(hba, intr_status)) > + hba->errors |= (UFSHCD_UIC_AH8_ERROR_MASK & intr_status); > + > if (hba->errors) > ufshcd_check_errors(hba); > > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index ecfa898b9ccc..994d73d03207 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -740,6 +740,11 @@ return true; > #endif > } > > +static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) > +{ > + return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT); > +} > + > #define ufshcd_writel(hba, val, reg) \ > writel((val), (hba)->mmio_base + (reg)) > #define ufshcd_readl(hba, reg) \ > diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h > index 6fa889de5ee5..4bcb205f2077 100644 > --- a/drivers/scsi/ufs/ufshci.h > +++ b/drivers/scsi/ufs/ufshci.h > @@ -148,6 +148,9 @@ enum { > UIC_HIBERNATE_EXIT |\ > UIC_POWER_MODE) > > +#define UFSHCD_UIC_AH8_ERROR_MASK (UIC_HIBERNATE_ENTER |\ > + UIC_HIBERNATE_EXIT) > + > #define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK) > > #define UFSHCD_ERROR_MASK (UIC_ERROR |\ > I don't have a way to test this patch, as my current platform does not support Auto Hibern8, over all this look ok to me. Thanks, Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1665820c22fd..e6a86223a0d4 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5254,6 +5254,7 @@ static void ufshcd_err_handler(struct work_struct *work) goto skip_err_handling; } if ((hba->saved_err & INT_FATAL_ERRORS) || + (hba->saved_err & UFSHCD_UIC_AH8_ERROR_MASK) || ((hba->saved_err & UIC_ERROR) && (hba->saved_uic_err & (UFSHCD_UIC_DL_PA_INIT_ERROR | UFSHCD_UIC_DL_NAC_RECEIVED_ERROR | @@ -5413,6 +5414,23 @@ static void ufshcd_update_uic_error(struct ufs_hba *hba) __func__, hba->uic_error); } +static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba, + u32 intr_mask) +{ + if (!ufshcd_is_auto_hibern8_supported(hba)) + return false; + + if (!(intr_mask & UFSHCD_UIC_AH8_ERROR_MASK)) + return false; + + if (hba->active_uic_cmd && + (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER || + hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT)) + return false; + + return true; +} + /** * ufshcd_check_errors - Check for errors that need s/w attention * @hba: per-adapter instance @@ -5431,6 +5449,15 @@ static void ufshcd_check_errors(struct ufs_hba *hba) queue_eh_work = true; } + if (hba->errors & UFSHCD_UIC_AH8_ERROR_MASK) { + dev_err(hba->dev, + "%s: Auto Hibern8 %s failed - status: 0x%08x, upmcrs: 0x%08x\n", + __func__, (hba->errors & UIC_HIBERNATE_ENTER) ? + "Enter" : "Exit", + hba->errors, ufshcd_get_upmcrs(hba)); + queue_eh_work = true; + } + if (queue_eh_work) { /* * update the transfer error masks to sticky bits, let's do this @@ -5493,6 +5520,10 @@ static void ufshcd_tmc_handler(struct ufs_hba *hba) static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) { hba->errors = UFSHCD_ERROR_MASK & intr_status; + + if (ufshcd_is_auto_hibern8_error(hba, intr_status)) + hba->errors |= (UFSHCD_UIC_AH8_ERROR_MASK & intr_status); + if (hba->errors) ufshcd_check_errors(hba); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index ecfa898b9ccc..994d73d03207 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -740,6 +740,11 @@ return true; #endif } +static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) +{ + return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT); +} + #define ufshcd_writel(hba, val, reg) \ writel((val), (hba)->mmio_base + (reg)) #define ufshcd_readl(hba, reg) \ diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 6fa889de5ee5..4bcb205f2077 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -148,6 +148,9 @@ enum { UIC_HIBERNATE_EXIT |\ UIC_POWER_MODE) +#define UFSHCD_UIC_AH8_ERROR_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT) + #define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK) #define UFSHCD_ERROR_MASK (UIC_ERROR |\
Currently auto-hibernate is activated if host supports auto-hibern8 capability. However error-handling is not implemented, which makes the feature somewhat risky. If either "Hibernate Enter" or "Hibernate Exit" fail during auto-hibernate flow, the corresponding interrupt "UIC_HIBERNATE_ENTER" or "UIC_HIBERNATE_EXIT" shall be raised according to UFS specification. This patch adds auto-hibernate error-handling: - Monitor "Hibernate Enter" and "Hibernate Exit" interrupts after auto-hibernate feature is activated. - If fail happens, trigger error-handling just like "manual-hibernate" fail and apply the same recovery flow: schedule UFS error handler in ufshcd_check_errors(), and then do host reset and restore in UFS error handler. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> --- drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd.h | 5 +++++ drivers/scsi/ufs/ufshci.h | 3 +++ 3 files changed, 39 insertions(+)