diff mbox series

[3/4] ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1

Message ID 1561128590-14621-4-git-send-email-christophe.kerello@st.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1 | expand

Commit Message

Christophe Kerello June 21, 2019, 2:49 p.m. UTC 
This patch enables FMC2 NAND controller used on stm32mp157c-ev1.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index feb8f77..9ab25da 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -157,6 +157,22 @@ 
 	};
 };
 
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand@0 {
+		reg = <0>;
+		nand-on-flash-bbt;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;