diff mbox series

[04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01

Message ID 1562656767-273566-5-git-send-email-s.riedmueller@phytec.de (mailing list archive)
State Mainlined
Commit 783c10aa740f70e22833baf33b7a87f6f7d94696
Headers show
Series Add further support for PHYTEC phyBOARD-Segin | expand

Commit Message

Stefan Riedmüller July 9, 2019, 7:19 a.m. UTC 
Fix node name for the user LEDs to prevent the pinctrl of the phyCORE's
leds node from being overwritten. Also use more generic names for user
LEDs.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi       |  3 +--
 arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi | 16 +++++++++-------
 2 files changed, 10 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 1b745582911c..73266b4a889b 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -31,8 +31,7 @@ 
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		led_green {
-			label = "phycore:green";
+		phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
index e2f38f39a6ad..2f3fd32a1167 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -21,20 +21,22 @@ 
 		};
 	};
 
-	user_leds: leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_user_leds>;
 		status = "disabled";
 
-		led_yellow {
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
 		};
 
-		led_red {
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
 		};
 	};
 };