diff mbox series

[v3,2/9] dt-bindings: i2c: add bindings for i2c analog and digital filter

Message ID 1562678049-17581-3-git-send-email-eugen.hristev@microchip.com (mailing list archive)
State New, archived
Headers show
Series i2c: add support for filters | expand

Commit Message

Eugen Hristev July 9, 2019, 1:19 p.m. UTC
From: Eugen Hristev <eugen.hristev@microchip.com>

Some i2c controllers have a built-in digital or analog filter.
This is specifically required depending on the hardware PCB/board.
Some controllers also allow specifying the maximum width of the
spikes that can be filtered. The width length can be specified in nanoseconds.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 Documentation/devicetree/bindings/i2c/i2c.txt | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Rob Herring (Arm) July 24, 2019, 8:22 p.m. UTC | #1
On Tue, 9 Jul 2019 13:19:33 +0000, <Eugen.Hristev@microchip.com> wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Some i2c controllers have a built-in digital or analog filter.
> This is specifically required depending on the hardware PCB/board.
> Some controllers also allow specifying the maximum width of the
> spikes that can be filtered. The width length can be specified in nanoseconds.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c.txt | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Wolfram Sang Aug. 31, 2019, 11:39 a.m. UTC | #2
On Tue, Jul 09, 2019 at 01:19:33PM +0000, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Some i2c controllers have a built-in digital or analog filter.
> This is specifically required depending on the hardware PCB/board.
> Some controllers also allow specifying the maximum width of the
> spikes that can be filtered. The width length can be specified in nanoseconds.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c.txt | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
> index 44efafd..a2d31aa 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c.txt
> @@ -55,6 +55,17 @@ wants to support one of the below features, it should adapt the bindings below.
>  	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
>  	specification.
>  
> +- i2c-ana-filter
> +	Enable analog filter for i2c lines.
> +
> +- i2c-dig-filter
> +	Enable digital filter for i2c lines.

Would you be OK with writing out 'analog' and 'digital' in full form?
The abrreviation doesn't save us much, I'd think, and I didn't find
similar wording in existing bindings.

> +
> +- i2c-filter-width-ns
> +	Width of spikes which can be filtered by either digital or analog
> +	filters (i2c-ana-filtr or i2c-dig-filtr). This width is specified
> +	in nanoseconds.
> +
>  - interrupts
>  	interrupts used by the device.
>  
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 44efafd..a2d31aa 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -55,6 +55,17 @@  wants to support one of the below features, it should adapt the bindings below.
 	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
 	specification.
 
+- i2c-ana-filter
+	Enable analog filter for i2c lines.
+
+- i2c-dig-filter
+	Enable digital filter for i2c lines.
+
+- i2c-filter-width-ns
+	Width of spikes which can be filtered by either digital or analog
+	filters (i2c-ana-filtr or i2c-dig-filtr). This width is specified
+	in nanoseconds.
+
 - interrupts
 	interrupts used by the device.