new file mode 100644
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &lpuart0;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A72_0>;
+ };
+ core1 {
+ cpu = <&A72_1>;
+ };
+ };
+ };
+
+ A53_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A72_0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&A72_L2>;
+ };
+
+ A72_1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ next-level-cache = <&A72_L2>;
+ };
+
+ A53_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A72_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ gic: interrupt-controller@51a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+ <0x0 0x51b00000 0 0xC0000>, /* GICR */
+ <0x0 0x52000000 0 0x2000>, /* GICC */
+ <0x0 0x52010000 0 0x1000>, /* GICH */
+ <0x0 0x52020000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+ };
+
+ scu {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3";
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+
+ pd: imx8qx-pd {
+ compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd";
+ #power-domain-cells = <1>;
+ };
+
+ clk: clock-controller {
+ compatible = "fsl,imx8qxp-clk";
+ #clock-cells = <2>;
+ };
+
+ iomuxc: pinctrl {
+ compatible = "fsl,imx8qm-iomuxc";
+ };
+
+ };
+
+ /* sorted in register address */
+ #include "imx8-ss-dma.dtsi"
+ #include "imx8-ss-conn.dtsi"
+ #include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qm-ss-dma.dtsi"
+#include "imx8qm-ss-conn.dtsi"
+#include "imx8qm-ss-lsio.dtsi"
@@ -144,7 +144,7 @@
};
clk: clock-controller {
- compatible = "fsl,imx8qxp-clk";
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <2>;
clocks = <&xtal32k &xtal24m>;
clock-names = "xtal_32KHz", "xtal_24Mhz";
The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53 proccessor with powerful graphic and multimedia features. It uses the same architecture as MX8QXP, so many SS can be reused. This patch adds i.MX8QuadMax SoC dtsi file. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v1->v2: * change to the new two cell scu clk binding --- arch/arm64/boot/dts/freescale/imx8qm.dtsi | 179 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 +- 2 files changed, 180 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi