Message ID | 1563811560-29589-4-git-send-email-olivier.moysan@st.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | 6b72c7a98bd631533c4f4ab293c8082abbb42601 |
Headers | show |
Series | drm/bridge: sii902x: fix audio mclk management | expand |
Le lun. 22 juil. 2019 à 18:06, Olivier Moysan <olivier.moysan@st.com> a écrit : > > The master clock on i2s bus is not mandatory, > as sii902X internal PLL can be used instead. > Make use of mclk optional. Applied on drm-misc-next. Thanks, Benjamin > > Signed-off-by: Olivier Moysan <olivier.moysan@st.com> > Reviewed-by: Jyri Sarha <jsarha@ti.com> > Acked-by: Andrzej Hajda <a.hajda@samsung.com> > --- > drivers/gpu/drm/bridge/sii902x.c | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c > index 962931c20efe..a323815aa9b6 100644 > --- a/drivers/gpu/drm/bridge/sii902x.c > +++ b/drivers/gpu/drm/bridge/sii902x.c > @@ -568,13 +568,14 @@ static int sii902x_audio_hw_params(struct device *dev, void *data, > return ret; > } > > - mclk_rate = clk_get_rate(sii902x->audio.mclk); > - > - ret = sii902x_select_mclk_div(&i2s_config_reg, params->sample_rate, > - mclk_rate); > - if (mclk_rate != ret * params->sample_rate) > - dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n", > - mclk_rate, ret, params->sample_rate); > + if (sii902x->audio.mclk) { > + mclk_rate = clk_get_rate(sii902x->audio.mclk); > + ret = sii902x_select_mclk_div(&i2s_config_reg, > + params->sample_rate, mclk_rate); > + if (mclk_rate != ret * params->sample_rate) > + dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n", > + mclk_rate, ret, params->sample_rate); > + } > > mutex_lock(&sii902x->mutex); > > @@ -751,11 +752,11 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x, > sii902x->audio.i2s_fifo_sequence[i] |= audio_fifo_id[i] | > i2s_lane_id[lanes[i]] | SII902X_TPI_I2S_FIFO_ENABLE; > > - sii902x->audio.mclk = devm_clk_get(dev, "mclk"); > + sii902x->audio.mclk = devm_clk_get_optional(dev, "mclk"); > if (IS_ERR(sii902x->audio.mclk)) { > dev_err(dev, "%s: No clock (audio mclk) found: %ld\n", > __func__, PTR_ERR(sii902x->audio.mclk)); > - return 0; > + return PTR_ERR(sii902x->audio.mclk); > } > > sii902x->audio.pdev = platform_device_register_data( > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c index 962931c20efe..a323815aa9b6 100644 --- a/drivers/gpu/drm/bridge/sii902x.c +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -568,13 +568,14 @@ static int sii902x_audio_hw_params(struct device *dev, void *data, return ret; } - mclk_rate = clk_get_rate(sii902x->audio.mclk); - - ret = sii902x_select_mclk_div(&i2s_config_reg, params->sample_rate, - mclk_rate); - if (mclk_rate != ret * params->sample_rate) - dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n", - mclk_rate, ret, params->sample_rate); + if (sii902x->audio.mclk) { + mclk_rate = clk_get_rate(sii902x->audio.mclk); + ret = sii902x_select_mclk_div(&i2s_config_reg, + params->sample_rate, mclk_rate); + if (mclk_rate != ret * params->sample_rate) + dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n", + mclk_rate, ret, params->sample_rate); + } mutex_lock(&sii902x->mutex); @@ -751,11 +752,11 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x, sii902x->audio.i2s_fifo_sequence[i] |= audio_fifo_id[i] | i2s_lane_id[lanes[i]] | SII902X_TPI_I2S_FIFO_ENABLE; - sii902x->audio.mclk = devm_clk_get(dev, "mclk"); + sii902x->audio.mclk = devm_clk_get_optional(dev, "mclk"); if (IS_ERR(sii902x->audio.mclk)) { dev_err(dev, "%s: No clock (audio mclk) found: %ld\n", __func__, PTR_ERR(sii902x->audio.mclk)); - return 0; + return PTR_ERR(sii902x->audio.mclk); } sii902x->audio.pdev = platform_device_register_data(