@@ -8,16 +8,22 @@
#include "enetc_pf.h"
-struct enetc_mdio_regs {
- u32 mdio_cfg; /* MDIO configuration and status */
- u32 mdio_ctl; /* MDIO control */
- u32 mdio_data; /* MDIO data */
- u32 mdio_addr; /* MDIO address */
+#define ENETC_MDIO_REG_OFFSET 0x1c00
+#define ENETC_MDIO_CFG 0x0 /* MDIO configuration and status */
+#define ENETC_MDIO_CTL 0x4 /* MDIO control */
+#define ENETC_MDIO_DATA 0x8 /* MDIO data */
+#define ENETC_MDIO_ADDR 0xc /* MDIO address */
+
+#define enetc_mdio_rd(hw, off) \
+ enetc_port_rd(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET)
+#define enetc_mdio_wr(hw, off, val) \
+ enetc_port_wr(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET, val)
+#define enetc_mdio_rd_reg(off) enetc_mdio_rd(hw, off)
+
+struct enetc_mdio_priv {
+ struct enetc_hw *hw;
};
-#define bus_to_enetc_regs(bus) (struct enetc_mdio_regs __iomem *)((bus)->priv)
-
-#define ENETC_MDIO_REG_OFFSET 0x1c00
#define ENETC_MDC_DIV 258
#define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8)
@@ -33,18 +39,19 @@ struct enetc_mdio_regs {
#define MDIO_DATA(x) ((x) & 0xffff)
#define TIMEOUT 1000
-static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs)
+static int enetc_mdio_wait_complete(struct enetc_hw *hw)
{
u32 val;
- return readx_poll_timeout(enetc_rd_reg, ®s->mdio_cfg, val,
+ return readx_poll_timeout(enetc_mdio_rd_reg, MDIO_CFG, val,
!(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT);
}
static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
u16 value)
{
- struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+ struct enetc_mdio_priv *mdio_priv = bus->priv;
+ struct enetc_hw *hw = mdio_priv->hw;
u32 mdio_ctl, mdio_cfg;
u16 dev_addr;
int ret;
@@ -59,29 +66,29 @@ static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
mdio_cfg &= ~MDIO_CFG_ENC45;
}
- enetc_wr_reg(®s->mdio_cfg, mdio_cfg);
+ enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* set port and dev addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
- enetc_wr_reg(®s->mdio_ctl, mdio_ctl);
+ enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
/* set the register address */
if (regnum & MII_ADDR_C45) {
- enetc_wr_reg(®s->mdio_addr, regnum & 0xffff);
+ enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
}
/* write the value */
- enetc_wr_reg(®s->mdio_data, MDIO_DATA(value));
+ enetc_mdio_wr(hw, MDIO_DATA, MDIO_DATA(value));
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
@@ -90,7 +97,8 @@ static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
{
- struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+ struct enetc_mdio_priv *mdio_priv = bus->priv;
+ struct enetc_hw *hw = mdio_priv->hw;
u32 mdio_ctl, mdio_cfg;
u16 dev_addr, value;
int ret;
@@ -104,41 +112,41 @@ static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
mdio_cfg &= ~MDIO_CFG_ENC45;
}
- enetc_wr_reg(®s->mdio_cfg, mdio_cfg);
+ enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* set port and device addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
- enetc_wr_reg(®s->mdio_ctl, mdio_ctl);
+ enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
/* set the register address */
if (regnum & MII_ADDR_C45) {
- enetc_wr_reg(®s->mdio_addr, regnum & 0xffff);
+ enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
}
/* initiate the read */
- enetc_wr_reg(®s->mdio_ctl, mdio_ctl | MDIO_CTL_READ);
+ enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl | MDIO_CTL_READ);
- ret = enetc_mdio_wait_complete(regs);
+ ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* return all Fs if nothing was there */
- if (enetc_rd_reg(®s->mdio_cfg) & MDIO_CFG_RD_ER) {
+ if (enetc_mdio_rd(hw, MDIO_CFG) & MDIO_CFG_RD_ER) {
dev_dbg(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
return 0xffff;
}
- value = enetc_rd_reg(®s->mdio_data) & 0xffff;
+ value = enetc_mdio_rd(hw, MDIO_DATA) & 0xffff;
return value;
}
@@ -146,12 +154,12 @@ static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
int enetc_mdio_probe(struct enetc_pf *pf)
{
struct device *dev = &pf->si->pdev->dev;
- struct enetc_mdio_regs __iomem *regs;
+ struct enetc_mdio_priv *mdio_priv;
struct device_node *np;
struct mii_bus *bus;
- int ret;
+ int err;
- bus = mdiobus_alloc_size(sizeof(regs));
+ bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
if (!bus)
return -ENOMEM;
@@ -159,41 +167,31 @@ int enetc_mdio_probe(struct enetc_pf *pf)
bus->read = enetc_mdio_read;
bus->write = enetc_mdio_write;
bus->parent = dev;
+ mdio_priv = bus->priv;
+ mdio_priv->hw = &pf->si->hw;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
- /* store the enetc mdio base address for this bus */
- regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET;
- bus->priv = regs;
-
np = of_get_child_by_name(dev->of_node, "mdio");
if (!np) {
dev_err(dev, "MDIO node missing\n");
- ret = -EINVAL;
- goto err_registration;
+ return -EINVAL;
}
- ret = of_mdiobus_register(bus, np);
- if (ret) {
+ err = of_mdiobus_register(bus, np);
+ if (err) {
of_node_put(np);
dev_err(dev, "cannot register MDIO bus\n");
- goto err_registration;
+ return err;
}
of_node_put(np);
pf->mdio = bus;
return 0;
-
-err_registration:
- mdiobus_free(bus);
-
- return ret;
}
void enetc_mdio_remove(struct enetc_pf *pf)
{
- if (pf->mdio) {
+ if (pf->mdio)
mdiobus_unregister(pf->mdio);
- mdiobus_free(pf->mdio);
- }
}
What's needed is basically a pointer to the mdio registers. This is one way to store it inside bus->priv allocated space, without upsetting sparse. Reworked accessor design as requested by Andrew Lunn in the process. Used devm_* variant to further clean up the init error / remove paths. Fixes following sparse warning: warning: incorrect type in assignment (different address spaces) expected void *priv got struct enetc_mdio_regs [noderef] <asn:2>*[assigned] regs Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> --- v1 - added this patch v2 - reworked accessors as per Andrew Lunn's request .../net/ethernet/freescale/enetc/enetc_mdio.c | 94 +++++++++---------- 1 file changed, 46 insertions(+), 48 deletions(-)