diff mbox series

[1/8] dt-bindings: omap: add new binding for PRM instances

Message ID 1565164139-21886-2-git-send-email-t-kristo@ti.com (mailing list archive)
State New, archived
Headers show
Series soc: ti: Add OMAP PRM driver | expand

Commit Message

Tero Kristo Aug. 7, 2019, 7:48 a.m. UTC
Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
of these will act as a power domain controller and potentially as a reset
provider.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/prm-inst.txt      | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/prm-inst.txt

Comments

J, KEERTHY Aug. 8, 2019, 4:35 a.m. UTC | #1
On 07/08/19 1:18 PM, Tero Kristo wrote:
> Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
> of these will act as a power domain controller and potentially as a reset
> provider.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>   .../devicetree/bindings/arm/omap/prm-inst.txt      | 24 ++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> new file mode 100644
> index 0000000..e0ae87b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
> @@ -0,0 +1,24 @@
> +OMAP PRM instance bindings
> +
> +Power and Reset Manager is an IP block on OMAP family of devices which
> +handle the power domains and their current state, and provide reset
> +handling for the domains and/or separate IP blocks under the power domain
> +hierarchy.
> +
> +Required properties:
> +- compatible:	Must be one of:
> +		"ti,am3-prm-inst"
> +		"ti,am4-prm-inst"
> +		"ti,omap4-prm-inst"
> +		"ti,omap5-prm-inst"
> +		"ti,dra7-prm-inst"
> +- reg:		Contains PRM instance register address range
> +		(base address and length)

How about reset-cells property, Isn't that a mandatory property?

> +
> +Example:
> +
> +prm_dsp2: prm@1b00 {
> +	compatible = "ti,dra7-prm-inst";
> +	reg = <0x1b00 0x40>;
> +	#reset-cells = <1>;
> +};
>
Tero Kristo Aug. 19, 2019, 9:28 a.m. UTC | #2
On 08/08/2019 07:35, Keerthy wrote:
> 
> 
> On 07/08/19 1:18 PM, Tero Kristo wrote:
>> Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
>> of these will act as a power domain controller and potentially as a reset
>> provider.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/arm/omap/prm-inst.txt      | 24 
>> ++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt 
>> b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>> new file mode 100644
>> index 0000000..e0ae87b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>> @@ -0,0 +1,24 @@
>> +OMAP PRM instance bindings
>> +
>> +Power and Reset Manager is an IP block on OMAP family of devices which
>> +handle the power domains and their current state, and provide reset
>> +handling for the domains and/or separate IP blocks under the power 
>> domain
>> +hierarchy.
>> +
>> +Required properties:
>> +- compatible:    Must be one of:
>> +        "ti,am3-prm-inst"
>> +        "ti,am4-prm-inst"
>> +        "ti,omap4-prm-inst"
>> +        "ti,omap5-prm-inst"
>> +        "ti,dra7-prm-inst"
>> +- reg:        Contains PRM instance register address range
>> +        (base address and length)
> 
> How about reset-cells property, Isn't that a mandatory property?

It is optional, but you are right, should be added to this.

-Tero

> 
>> +
>> +Example:
>> +
>> +prm_dsp2: prm@1b00 {
>> +    compatible = "ti,dra7-prm-inst";
>> +    reg = <0x1b00 0x40>;
>> +    #reset-cells = <1>;
>> +};
>>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Suman Anna Aug. 19, 2019, 9:28 p.m. UTC | #3
Hi Tero,

On 8/19/19 4:28 AM, Tero Kristo wrote:
> On 08/08/2019 07:35, Keerthy wrote:
>>
>>
>> On 07/08/19 1:18 PM, Tero Kristo wrote:
>>> Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
>>> of these will act as a power domain controller and potentially as a
>>> reset
>>> provider.
>>>
>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>> ---
>>>   .../devicetree/bindings/arm/omap/prm-inst.txt      | 24
>>> ++++++++++++++++++++++
>>>   1 file changed, 24 insertions(+)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>> b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>> new file mode 100644
>>> index 0000000..e0ae87b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>> @@ -0,0 +1,24 @@
>>> +OMAP PRM instance bindings
>>> +
>>> +Power and Reset Manager is an IP block on OMAP family of devices which
>>> +handle the power domains and their current state, and provide reset
>>> +handling for the domains and/or separate IP blocks under the power
>>> domain
>>> +hierarchy.

So, I see that you are adding these as flat nodes directly under the prm
nodes where we have the clocks and clock_domains. Are you anticipating a
single DT node and/or driver managing both power-domains and resets?

>>> +
>>> +Required properties:
>>> +- compatible:    Must be one of:
>>> +        "ti,am3-prm-inst"
>>> +        "ti,am4-prm-inst"
>>> +        "ti,omap4-prm-inst"
>>> +        "ti,omap5-prm-inst"
>>> +        "ti,dra7-prm-inst"

What about OMAP2, OMAP3, DM814x, DM816x?

regards
Suman

>>> +- reg:        Contains PRM instance register address range
>>> +        (base address and length)
>>
>> How about reset-cells property, Isn't that a mandatory property?
> 
> It is optional, but you are right, should be added to this.
> 
> -Tero
> 
>>
>>> +
>>> +Example:
>>> +
>>> +prm_dsp2: prm@1b00 {
>>> +    compatible = "ti,dra7-prm-inst";
>>> +    reg = <0x1b00 0x40>;
>>> +    #reset-cells = <1>;
>>> +};
>>>
> 
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Tero Kristo Aug. 20, 2019, 7:45 a.m. UTC | #4
On 20.8.2019 0.28, Suman Anna wrote:
> Hi Tero,
> 
> On 8/19/19 4:28 AM, Tero Kristo wrote:
>> On 08/08/2019 07:35, Keerthy wrote:
>>>
>>>
>>> On 07/08/19 1:18 PM, Tero Kristo wrote:
>>>> Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
>>>> of these will act as a power domain controller and potentially as a
>>>> reset
>>>> provider.
>>>>
>>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>>> ---
>>>>    .../devicetree/bindings/arm/omap/prm-inst.txt      | 24
>>>> ++++++++++++++++++++++
>>>>    1 file changed, 24 insertions(+)
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>>> b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>>> new file mode 100644
>>>> index 0000000..e0ae87b
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
>>>> @@ -0,0 +1,24 @@
>>>> +OMAP PRM instance bindings
>>>> +
>>>> +Power and Reset Manager is an IP block on OMAP family of devices which
>>>> +handle the power domains and their current state, and provide reset
>>>> +handling for the domains and/or separate IP blocks under the power
>>>> domain
>>>> +hierarchy.
> 
> So, I see that you are adding these as flat nodes directly under the prm
> nodes where we have the clocks and clock_domains. Are you anticipating a
> single DT node and/or driver managing both power-domains and resets?

Single DT node + driver for both power-domains / resets. You can 
probably see from the driver code that the reset probing is called 
separately from the main probe function; power domain support should be 
added in similar manner under it.

> 
>>>> +
>>>> +Required properties:
>>>> +- compatible:    Must be one of:
>>>> +        "ti,am3-prm-inst"
>>>> +        "ti,am4-prm-inst"
>>>> +        "ti,omap4-prm-inst"
>>>> +        "ti,omap5-prm-inst"
>>>> +        "ti,dra7-prm-inst"
> 
> What about OMAP2, OMAP3, DM814x, DM816x?

OMAP2/3 architectures are slightly different beast to tackle, so 
planning to work on those later on.

-Tero

> 
> regards
> Suman
> 
>>>> +- reg:        Contains PRM instance register address range
>>>> +        (base address and length)
>>>
>>> How about reset-cells property, Isn't that a mandatory property?
>>
>> It is optional, but you are right, should be added to this.
>>
>> -Tero
>>
>>>
>>>> +
>>>> +Example:
>>>> +
>>>> +prm_dsp2: prm@1b00 {
>>>> +    compatible = "ti,dra7-prm-inst";
>>>> +    reg = <0x1b00 0x40>;
>>>> +    #reset-cells = <1>;
>>>> +};
>>>>
>>
>> -- 
> 

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
new file mode 100644
index 0000000..e0ae87b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -0,0 +1,24 @@ 
+OMAP PRM instance bindings
+
+Power and Reset Manager is an IP block on OMAP family of devices which
+handle the power domains and their current state, and provide reset
+handling for the domains and/or separate IP blocks under the power domain
+hierarchy.
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prm-inst"
+		"ti,am4-prm-inst"
+		"ti,omap4-prm-inst"
+		"ti,omap5-prm-inst"
+		"ti,dra7-prm-inst"
+- reg:		Contains PRM instance register address range
+		(base address and length)
+
+Example:
+
+prm_dsp2: prm@1b00 {
+	compatible = "ti,dra7-prm-inst";
+	reg = <0x1b00 0x40>;
+	#reset-cells = <1>;
+};