diff mbox series

[2/2] clk: at91: select parent if main oscillator or bypass is enabled

Message ID 1568042692-11784-2-git-send-email-eugen.hristev@microchip.com (mailing list archive)
State Mainlined
Commit 69a6bcde7fd3fe6f3268ce26f31d9d9378384c98
Headers show
Series [1/2] clk: at91: fix update bit maps on CFG_MOR write | expand

Commit Message

Eugen Hristev Sept. 9, 2019, 3:30 p.m. UTC 
From: Eugen Hristev <eugen.hristev@microchip.com>

Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 drivers/clk/at91/clk-main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

Comments

Alexandre Belloni Sept. 11, 2019, 12:21 p.m. UTC | #1 
On 09/09/2019 15:30:34+0000, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Selecting the right parent for the main clock is done using only
> main oscillator enabled bit.
> In case we have this oscillator bypassed by an external signal (no driving
> on the XOUT line), we still use external clock, but with BYPASS bit set.
> So, in this case we must select the same parent as before.
> Create a macro that will select the right parent considering both bits from
> the MOR register.
> Use this macro when looking for the right parent.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  drivers/clk/at91/clk-main.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
> index ebe9b99..87083b3 100644
> --- a/drivers/clk/at91/clk-main.c
> +++ b/drivers/clk/at91/clk-main.c
> @@ -21,6 +21,10 @@
>  
>  #define MOR_KEY_MASK		(0xff << 16)
>  
> +#define clk_main_parent_select(s)	(((s) & \
> +					(AT91_PMC_MOSCEN | \
> +					AT91_PMC_OSCBYPASS)) ? 1 : 0)
> +
>  struct clk_main_osc {
>  	struct clk_hw hw;
>  	struct regmap *regmap;
> @@ -113,7 +117,7 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
>  
>  	regmap_read(regmap, AT91_PMC_SR, &status);
>  
> -	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
> +	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
>  }
>  
>  static const struct clk_ops main_osc_ops = {
> @@ -450,7 +454,7 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
>  
>  	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
>  
> -	return status & AT91_PMC_MOSCEN ? 1 : 0;
> +	return clk_main_parent_select(status);
>  }
>  
>  static const struct clk_ops sam9x5_main_ops = {
> @@ -492,7 +496,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
>  	clkmain->hw.init = &init;
>  	clkmain->regmap = regmap;
>  	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
> -	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
> +	clkmain->parent = clk_main_parent_select(status);
>  
>  	hw = &clkmain->hw;
>  	ret = clk_hw_register(NULL, &clkmain->hw);
> -- 
> 2.7.4
>
Claudiu Beznea Sept. 16, 2019, 5:25 a.m. UTC | #2 
On 09.09.2019 18:30, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Selecting the right parent for the main clock is done using only
> main oscillator enabled bit.
> In case we have this oscillator bypassed by an external signal (no driving
> on the XOUT line), we still use external clock, but with BYPASS bit set.
> So, in this case we must select the same parent as before.
> Create a macro that will select the right parent considering both bits from
> the MOR register.
> Use this macro when looking for the right parent.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>

> ---
>  drivers/clk/at91/clk-main.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
> index ebe9b99..87083b3 100644
> --- a/drivers/clk/at91/clk-main.c
> +++ b/drivers/clk/at91/clk-main.c
> @@ -21,6 +21,10 @@
>  
>  #define MOR_KEY_MASK		(0xff << 16)
>  
> +#define clk_main_parent_select(s)	(((s) & \
> +					(AT91_PMC_MOSCEN | \
> +					AT91_PMC_OSCBYPASS)) ? 1 : 0)
> +
>  struct clk_main_osc {
>  	struct clk_hw hw;
>  	struct regmap *regmap;
> @@ -113,7 +117,7 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
>  
>  	regmap_read(regmap, AT91_PMC_SR, &status);
>  
> -	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
> +	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
>  }
>  
>  static const struct clk_ops main_osc_ops = {
> @@ -450,7 +454,7 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
>  
>  	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
>  
> -	return status & AT91_PMC_MOSCEN ? 1 : 0;
> +	return clk_main_parent_select(status);
>  }
>  
>  static const struct clk_ops sam9x5_main_ops = {
> @@ -492,7 +496,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
>  	clkmain->hw.init = &init;
>  	clkmain->regmap = regmap;
>  	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
> -	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
> +	clkmain->parent = clk_main_parent_select(status);
>  
>  	hw = &clkmain->hw;
>  	ret = clk_hw_register(NULL, &clkmain->hw);
>
Stephen Boyd Sept. 16, 2019, 8:15 p.m. UTC | #3 
Quoting Eugen.Hristev@microchip.com (2019-09-09 08:30:34)
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Selecting the right parent for the main clock is done using only
> main oscillator enabled bit.
> In case we have this oscillator bypassed by an external signal (no driving
> on the XOUT line), we still use external clock, but with BYPASS bit set.
> So, in this case we must select the same parent as before.
> Create a macro that will select the right parent considering both bits from
> the MOR register.
> Use this macro when looking for the right parent.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index ebe9b99..87083b3 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -21,6 +21,10 @@ 
 
 #define MOR_KEY_MASK		(0xff << 16)
 
+#define clk_main_parent_select(s)	(((s) & \
+					(AT91_PMC_MOSCEN | \
+					AT91_PMC_OSCBYPASS)) ? 1 : 0)
+
 struct clk_main_osc {
 	struct clk_hw hw;
 	struct regmap *regmap;
@@ -113,7 +117,7 @@  static int clk_main_osc_is_prepared(struct clk_hw *hw)
 
 	regmap_read(regmap, AT91_PMC_SR, &status);
 
-	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
+	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
 }
 
 static const struct clk_ops main_osc_ops = {
@@ -450,7 +454,7 @@  static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
 
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
 
-	return status & AT91_PMC_MOSCEN ? 1 : 0;
+	return clk_main_parent_select(status);
 }
 
 static const struct clk_ops sam9x5_main_ops = {
@@ -492,7 +496,7 @@  at91_clk_register_sam9x5_main(struct regmap *regmap,
 	clkmain->hw.init = &init;
 	clkmain->regmap = regmap;
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
-	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
+	clkmain->parent = clk_main_parent_select(status);
 
 	hw = &clkmain->hw;
 	ret = clk_hw_register(NULL, &clkmain->hw);