diff mbox series

[3/4] dt-bindings: regulator: describe da906x buck regulator modes

Message ID 1573121050-4728-4-git-send-email-chf.fritz@googlemail.com (mailing list archive)
State New, archived
Headers show
Series regulator da9062: support setting buck modes | expand

Commit Message

Christoph Fritz Nov. 7, 2019, 10:04 a.m. UTC
This patch adds DT description of da906x buck regulator modes.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
 Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Mark Brown Nov. 7, 2019, 11:55 a.m. UTC | #1
On Thu, Nov 07, 2019 at 11:04:09AM +0100, Christoph Fritz wrote:
> This patch adds DT description of da906x buck regulator modes.

Please submit patches using subject lines reflecting the style for the
subsystem, this makes it easier for people to identify relevant patches.
Look at what existing commits in the area you're changing are doing and
make sure your subject lines visually resemble what they're doing.
There's no need to resubmit to fix this alone.
Adam Thomson Nov. 8, 2019, 10:44 a.m. UTC | #2
On 07 November 2019 10:04, Christoph Fritz wrote:

> This patch adds DT description of da906x buck regulator modes.

Just the renames from da906x to da9063 required as per 01 patch comments

> 
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
>  Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt
> b/Documentation/devicetree/bindings/mfd/da9062.txt
> index edca653..5989411 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -66,6 +66,9 @@ Sub-nodes:
>    details of individual regulator device can be found in:
>    Documentation/devicetree/bindings/regulator/regulator.txt
> 
> +  regulator-initial-mode may be specified for buck regulators using mode values
> +  from include/dt-bindings/regulator/dlg,da906x-regulator.h.
> +
>  - rtc : This node defines settings required for the Real-Time Clock associated
>    with the DA9062. There are currently no entries in this binding, however
>    compatible = "dlg,da9062-rtc" should be added if a node is created.
> @@ -96,6 +99,7 @@ Example:
>  				regulator-max-microvolt = <1570000>;
>  				regulator-min-microamp = <500000>;
>  				regulator-max-microamp = <2000000>;
> +				regulator-initial-mode =
> <DA906X_BUCK_MODE_SYNC>;
>  				regulator-boot-on;
>  			};
>  			DA9062_LDO1: ldo1 {
> --
> 2.1.4
Rob Herring Nov. 13, 2019, 1:32 p.m. UTC | #3
On Thu,  7 Nov 2019 11:04:09 +0100, Christoph Fritz wrote:
> This patch adds DT description of da906x buck regulator modes.
> 
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
>  Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index edca653..5989411 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -66,6 +66,9 @@  Sub-nodes:
   details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
 
+  regulator-initial-mode may be specified for buck regulators using mode values
+  from include/dt-bindings/regulator/dlg,da906x-regulator.h.
+
 - rtc : This node defines settings required for the Real-Time Clock associated
   with the DA9062. There are currently no entries in this binding, however
   compatible = "dlg,da9062-rtc" should be added if a node is created.
@@ -96,6 +99,7 @@  Example:
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp = <500000>;
 				regulator-max-microamp = <2000000>;
+				regulator-initial-mode = <DA906X_BUCK_MODE_SYNC>;
 				regulator-boot-on;
 			};
 			DA9062_LDO1: ldo1 {