diff mbox series

i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop

Message ID 1573546784-28182-1-git-send-email-alain.volmat@st.com (mailing list archive)
State Mainlined
Commit 7787657d7ee55a9ecf4aea4907b46b87a44eda67
Headers show
Series i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop | expand

Commit Message

Alain Volmat Nov. 12, 2019, 8:19 a.m. UTC
Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
addresses and thus is not eligible in case of 10-bit addresses.
As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
check is performed at the beginning of the stm32f7_i2c_reg_slave function.

Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Pierre Yves MORDRET Nov. 18, 2019, 9:56 a.m. UTC | #1
Hello

Look good to me

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Regards

On 11/12/19 9:19 AM, Alain Volmat wrote:
> Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
> it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
> addresses and thus is not eligible in case of 10-bit addresses.
> As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
> check is performed at the beginning of the stm32f7_i2c_reg_slave function.
> 
> Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index b9a082f64d58..b2634afe066d 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1268,7 +1268,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
>  	 * slave[1] supports 7-bit slave address only
>  	 */
>  	for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
> -		if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
> +		if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
>  			continue;
>  		if (!i2c_dev->slave[i]) {
>  			*id = i;
>
Wolfram Sang Nov. 25, 2019, 2:51 p.m. UTC | #2
On Tue, Nov 12, 2019 at 09:19:44AM +0100, Alain Volmat wrote:
> Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
> it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
> addresses and thus is not eligible in case of 10-bit addresses.
> As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
> check is performed at the beginning of the stm32f7_i2c_reg_slave function.
> 
> Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>

Applied to for-next (i.e. for 5.5.), thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index b9a082f64d58..b2634afe066d 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1268,7 +1268,7 @@  static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 	 * slave[1] supports 7-bit slave address only
 	 */
 	for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
-		if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
+		if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
 			continue;
 		if (!i2c_dev->slave[i]) {
 			*id = i;