diff mbox series

[RESEND,1/1] ARM: dts: imx7s: Add power domain for imx7d HSIC

Message ID 1575342112-14702-1-git-send-email-peter.chen@nxp.com (mailing list archive)
State Mainlined
Commit 02f8eb40ef7b141b56eccb4faaf83becac3f1d4b
Headers show
Series [RESEND,1/1] ARM: dts: imx7s: Add power domain for imx7d HSIC | expand

Commit Message

Peter Chen Dec. 3, 2019, 3:01 a.m. UTC
Otherwise, the system will hang if USB driver try to access
portsc register.

Cc: André Draszik <git@andred.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 arch/arm/boot/dts/imx7s.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Shawn Guo Dec. 11, 2019, 2:37 a.m. UTC | #1
On Tue, Dec 03, 2019 at 11:01:52AM +0800, Peter Chen wrote:
> Otherwise, the system will hang if USB driver try to access
> portsc register.
> 
> Cc: André Draszik <git@andred.net>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>

Applied, thanks.
André Draszik Feb. 11, 2020, 8:57 a.m. UTC | #2
On Tue, 2019-12-03 at 11:01 +0800, Peter Chen wrote:
> Otherwise, the system will hang if USB driver try to access
> portsc register.
> 
> Cc: André Draszik <git@andred.net>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
>  arch/arm/boot/dts/imx7s.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index c1a4fff5ceda..a5b380f530f8 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -658,6 +658,12 @@
>  						reg = <1>;
>  						power-supply = <&reg_1p0d>;
>  					};
> +
> +					pgc_hsic_phy: power-domain@2 {
> +						#power-domain-cells = <0>;
> +						reg = <2>;
> +						power-supply = <&reg_1p2>;
> +					};
>  				};
>  			};
>  		};
> @@ -1101,6 +1107,7 @@
>  				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
>  				reg = <0x30b30000 0x200>;
>  				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +				power-domains = <&pgc_hsic_phy>;
>  				clocks = <&clks IMX7D_USB_CTRL_CLK>;
>  				fsl,usbphy = <&usbphynop3>;
>  				fsl,usbmisc = <&usbmisc3 0>;

It's a bit late now, but for completeness, with this patch applied
the HSIC port works fine on my iMX7d board now.

Thanks Peter.

Tested-by: André Draszik <git@andred.net>


Cheers,
Andre'
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index c1a4fff5ceda..a5b380f530f8 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -658,6 +658,12 @@ 
 						reg = <1>;
 						power-supply = <&reg_1p0d>;
 					};
+
+					pgc_hsic_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <2>;
+						power-supply = <&reg_1p2>;
+					};
 				};
 			};
 		};
@@ -1101,6 +1107,7 @@ 
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;