@@ -736,13 +736,30 @@ static void __init at91_pm_modes_init(void)
struct pmc_info {
unsigned long uhp_udp_mask;
+ unsigned long mckr;
};
static const struct pmc_info pmc_infos[] __initconst = {
- { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
- { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
- { .uhp_udp_mask = AT91SAM926x_PMC_UHP },
- { .uhp_udp_mask = 0 },
+ {
+ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+ .mckr = 0x30,
+ },
+
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+ .mckr = 0x30,
+ },
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP,
+ .mckr = 0x30,
+ },
+ { .uhp_udp_mask = 0,
+ .mckr = 0x30,
+ },
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+ .mckr = 0x28,
+ },
};
static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +774,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
- { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+ { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
{ /* sentinel */ },
};
@@ -779,6 +796,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc = of_id->data;
soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+ soc_pm.data.pmc_mckr_offset = pmc->mckr;
if (pm_idle)
arm_pm_idle = pm_idle;
@@ -33,6 +33,7 @@ struct at91_pm_data {
void __iomem *sfrbu;
unsigned int standby_mode;
unsigned int suspend_mode;
+ unsigned int pmc_mckr_offset;
};
#endif
@@ -12,6 +12,8 @@ int main(void)
DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc));
DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu));
+ DEFINE(PM_DATA_PMC_MCKR_OFFSET, offsetof(struct at91_pm_data,
+ pmc_mckr_offset));
return 0;
}
@@ -93,6 +93,8 @@ ENTRY(at91_pm_suspend_in_sram)
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
str tmp1, .pm_mode
+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+ str tmp1, .mckr_offset
/* Both ldrne below are here to preload their address in the TLB */
ldr tmp1, [r0, #PM_DATA_SHDWC]
str tmp1, .shdwc
@@ -138,9 +140,10 @@ ENDPROC(at91_pm_suspend_in_sram)
ENTRY(at91_backup_mode)
/* Switch the master clock source to slow clock. */
ldr pmc, .pmc_base
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp2, .mckr_offset
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -218,6 +221,7 @@ ENDPROC(at91_backup_mode)
*/
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
/* Save RC oscillator state and check if it is enabled. */
ldr tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +258,10 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Switch the master clock source to main clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -280,9 +284,9 @@ ENDPROC(at91_backup_mode)
wait_moscrdy
/* Switch the master clock source to slow clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -296,10 +300,10 @@ ENDPROC(at91_backup_mode)
wait_moscsels
/* Switch the master clock source to main clock */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -325,16 +329,17 @@ ENDPROC(at91_backup_mode)
ENTRY(at91_ulp_mode)
ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
/* Save Master clock setting */
- ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, [pmc, tmp2]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, [pmc, tmp2]
wait_mckrdy
@@ -355,8 +360,9 @@ ulp_exit:
/*
* Restore master clock setting
*/
- ldr tmp1, .saved_mckr
- str tmp1, [pmc, #AT91_PMC_MCKR]
+ ldr tmp1, .mckr_offset
+ ldr tmp2, .saved_mckr
+ str tmp2, [pmc, tmp1]
wait_mckrdy
@@ -502,6 +508,8 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.pm_mode:
.word 0
+.mckr_offset:
+ .word 0
.saved_mckr:
.word 0
.saved_sam9_lpr:
SAM9X60's PMC has different master clock register offset than the other SoCs' PMC. Due to this, specify master clock register offset based on PMC compatible and pass it to pm_suspend.S since it is also needed in there. When PM part for SAM9X60 was published the SAM9X60's PMC (commit f6deae46039c ("clk: at91: add sam9x60 pmc driver")) wasn't integrated. Fixes: fd2280a1829b ("ARM: at91: pm: initial PM support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/mach-at91/pm.c | 28 +++++++++++++++++++++++----- arch/arm/mach-at91/pm.h | 1 + arch/arm/mach-at91/pm_data-offsets.c | 2 ++ arch/arm/mach-at91/pm_suspend.S | 32 ++++++++++++++++++++------------ 4 files changed, 46 insertions(+), 17 deletions(-)