@@ -12,6 +12,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "clk-scu.h"
@@ -239,6 +240,12 @@ static int imx_lpcg_parse_clks_from_dt(struct platform_device *pdev,
return -EINVAL;
}
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
for (i = 0; i < count; i++) {
idx = bit_offset[i] / 4;
if (idx > IMX_LPCG_MAX_CLKS) {
@@ -248,9 +255,9 @@ static int imx_lpcg_parse_clks_from_dt(struct platform_device *pdev,
goto unreg;
}
- clk_hws[idx] = imx_clk_lpcg_scu(output_names[i],
- parent_names[i], 0, base,
- bit_offset[i], false);
+ clk_hws[idx] = imx_clk_lpcg_scu_dev(&pdev->dev, output_names[i],
+ parent_names[i], 0, base,
+ bit_offset[i], false);
if (IS_ERR(clk_hws[idx])) {
dev_warn(&pdev->dev, "failed to register clock %d\n",
idx);
@@ -261,8 +268,13 @@ static int imx_lpcg_parse_clks_from_dt(struct platform_device *pdev,
ret = devm_of_clk_add_hw_provider(&pdev->dev, imx_lpcg_of_clk_src_get,
clk_data);
- if (!ret)
- return 0;
+ if (ret)
+ goto unreg;
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
+ return 0;
unreg:
while (--i >= 0) {
@@ -271,6 +283,8 @@ static int imx_lpcg_parse_clks_from_dt(struct platform_device *pdev,
imx_clk_lpcg_scu_unregister(clk_hws[idx]);
}
+ pm_runtime_disable(&pdev->dev);
+
return ret;
}
add runtime pm support Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v4->v5: * minor err check fix v3->v4: * disable rpm when error out v3: new patch --- drivers/clk/imx/clk-imx8qxp-lpcg.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-)