diff mbox series

ARM: dts: gw552x: add USB OTG support

Message ID 1587748215-9587-1-git-send-email-tharvey@gateworks.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: gw552x: add USB OTG support | expand

Commit Message

Tim Harvey April 24, 2020, 5:10 p.m. UTC
The GW552x-B board revision adds USB OTG support.

Enable the device-tree node and configure the OTG_ID pin.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

Comments

Shawn Guo April 29, 2020, 3:37 a.m. UTC | #1
On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> The GW552x-B board revision adds USB OTG support.
> 
> Enable the device-tree node and configure the OTG_ID pin.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index dc646b7..133a1e3 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -12,8 +12,6 @@
>  		led1 = &led1;
>  		led2 = &led2;
>  		nand = &gpmi;
> -		usb0 = &usbh1;
> -		usb1 = &usbotg;

Have some comments about this change in the commit log?

Shawn

>  	};
>  
>  	chosen {
> @@ -258,6 +256,14 @@
>  	status = "okay";
>  };
>  
> +&usbotg {
> +	vbus-supply = <&reg_5p0v>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &wdog1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_wdog>;
> @@ -359,6 +365,12 @@
>  		>;
>  	};
>  
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
> +		>;
> +	};
> +
>  	pinctrl_wdog: wdoggrp {
>  		fsl,pins = <
>  			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
> -- 
> 2.7.4
>
Tim Harvey April 29, 2020, 3:12 p.m. UTC | #2
On Tue, Apr 28, 2020 at 8:37 PM Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> > The GW552x-B board revision adds USB OTG support.
> >
> > Enable the device-tree node and configure the OTG_ID pin.
> >
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > ---
> >  arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
> >  1 file changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > index dc646b7..133a1e3 100644
> > --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > @@ -12,8 +12,6 @@
> >               led1 = &led1;
> >               led2 = &led2;
> >               nand = &gpmi;
> > -             usb0 = &usbh1;
> > -             usb1 = &usbotg;
>
> Have some comments about this change in the commit log?
>

Shawn,

I shouldn't have removed those... will submit a v2. Thank you for catching this!

Tim
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..133a1e3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -12,8 +12,6 @@ 
 		led1 = &led1;
 		led2 = &led2;
 		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
 	};
 
 	chosen {
@@ -258,6 +256,14 @@ 
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +365,12 @@ 
 		>;
 	};
 
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0