[v2,2/2] reset: reset-zynqmp: Added support for Versal platform

Commit Message

Sai Krishna Potthuri July 22, 2020, 7:16 a.m. UTC

Updated the reset driver to support Versal platform.
As part of adding Versal support
- Added Versal specific compatible string.
- Reset Id and number of resets are different for Versal and ZynqMP,
hence taken care of these two based on compatible string.

Signed-off-by: Sai Krishna Potthuri <[e-mail]>
---
 drivers/reset/reset-zynqmp.c | 50 +++++++++++++++++++++++++++++++-----
 1 file changed, 44 insertions(+), 6 deletions(-)

Patch

diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 373ea8d4f7a1..ebd433fa09dd 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -9,12 +9,20 @@ 
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/of_device.h>
 
 #define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
 #define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
+#define VERSAL_NR_RESETS	95
+
+struct zynqmp_reset_soc_data {
+	u32 reset_id;
+	u32 num_resets;
+};
 
 struct zynqmp_reset_data {
 	struct reset_controller_dev rcdev;
+	const struct zynqmp_reset_soc_data *data;
 };
 
 static inline struct zynqmp_reset_data *
@@ -26,23 +34,28 @@  to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
 static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_ASSERT);
 }
 
 static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
 				 unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_RELEASE);
 }
 
 static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
 	int val, err;
 
-	err = zynqmp_pm_reset_get_status(ZYNQMP_RESET_ID + id, &val);
+	err = zynqmp_pm_reset_get_status(priv->data->reset_id + id, &val);
 	if (err)
 		return err;
 
@@ -52,10 +65,28 @@  static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
 			      unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_PULSE);
 }
 
+static int zynqmp_reset_of_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	return reset_spec->args[0];
+}
+
+static const struct zynqmp_reset_soc_data zynqmp_reset_data = {
+	.reset_id = ZYNQMP_RESET_ID,
+	.num_resets = ZYNQMP_NR_RESETS,
+};
+
+static const struct zynqmp_reset_soc_data versal_reset_data = {
+        .reset_id = 0,
+        .num_resets = VERSAL_NR_RESETS,
+};
+
 static const struct reset_control_ops zynqmp_reset_ops = {
 	.reset = zynqmp_reset_reset,
 	.assert = zynqmp_reset_assert,
@@ -71,18 +102,25 @@  static int zynqmp_reset_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->data = of_device_get_match_data(&pdev->dev);
+	if (!priv->data)
+		return -EINVAL;
+
 	platform_set_drvdata(pdev, priv);
 
 	priv->rcdev.ops = &zynqmp_reset_ops;
 	priv->rcdev.owner = THIS_MODULE;
 	priv->rcdev.of_node = pdev->dev.of_node;
-	priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
+	priv->rcdev.nr_resets = priv->data->num_resets;
+	priv->rcdev.of_reset_n_cells = 1;
+	priv->rcdev.of_xlate = zynqmp_reset_of_xlate;
 
 	return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
 }
 
 static const struct of_device_id zynqmp_reset_dt_ids[] = {
-	{ .compatible = "xlnx,zynqmp-reset", },
+	{ .compatible = "xlnx,zynqmp-reset", .data = &zynqmp_reset_data, },
+	{ .compatible = "xlnx,versal-reset", .data = &versal_reset_data, },
 	{ /* sentinel */ },
 };