@@ -21,6 +21,9 @@
#define UPLL_DIV 2
#define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
+#define FCORE_MIN (600000000)
+#define FCORE_MAX (1200000000)
+
#define PLL_MAX_ID 1
struct sam9x60_pll {
@@ -168,6 +171,7 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
unsigned long bestdiv = 0;
unsigned long bestmul = 0;
unsigned long bestfrac = 0;
+ u64 fcore = 0;
if (rate < characteristics->output[0].min ||
rate > characteristics->output[0].max)
@@ -212,6 +216,11 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
remainder = rate - tmprate;
}
+ fcore = parent_rate * (tmpmul + 1) +
+ ((u64)parent_rate * tmpfrac >> 22);
+ if (fcore < FCORE_MIN || fcore > FCORE_MAX)
+ continue;
+
/*
* Compare the remainder with the best remainder found until
* now and elect a new best multiplier/divider pair if the
@@ -231,7 +240,8 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
}
/* Check if bestrate is a valid output rate */
- if (bestrate < characteristics->output[0].min ||
+ if (fcore < FCORE_MIN || fcore > FCORE_MAX ||
+ bestrate < characteristics->output[0].min ||
bestrate > characteristics->output[0].max)
return -ERANGE;
@@ -22,7 +22,7 @@ static const struct clk_master_layout sam9x60_master_layout = {
};
static const struct clk_range plla_outputs[] = {
- { .min = 300000000, .max = 600000000 },
+ { .min = 2343750, .max = 1200000000 },
};
static const struct clk_pll_characteristics plla_characteristics = {
According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- drivers/clk/at91/clk-sam9x60-pll.c | 12 +++++++++++- drivers/clk/at91/sam9x60.c | 2 +- 2 files changed, 12 insertions(+), 2 deletions(-)