[PATCHv2] arm64: dts: diamonmesa: add device tree for Intel Diamond Mesa

Commit Message

Richard Gong Aug. 31, 2020, 6:55 p.m. UTC

From: Richard Gong <[e-mail]>

Add the device tree files for Intel Diamond Mesa SoC

Signed-off-by: Richard Gong <[e-mail]>
---
v2: use socfpga_agilex.dtsi rather than socfpga_diamondmesa.dtsi
---
 arch/arm64/Kconfig.platforms                      |  5 ++
 arch/arm64/boot/dts/intel/Makefile                |  1 +
 arch/arm64/boot/dts/intel/socfpga_diamondmesa.dts | 62 +++++++++++++++++++++++
 3 files changed, 68 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_diamondmesa.dts

Patch

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index d235b27..ffae871 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -13,6 +13,11 @@  config ARCH_AGILEX
 	help
 	  This enables support for Intel's Agilex SoCFPGA Family.
 
+config ARCH_DIAMONDMESA
+	bool "Intel's Diamond Mesa SoCFPGA Family"
+	help
+	  This enables support for Intel's Diamond Mesa SoCFPGA Family.
+
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 296ecee..f725c60 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,4 +1,5 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
 			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_DIAMONDMESA) += socfpga_diamondmesa.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_diamondmesa.dts b/arch/arm64/boot/dts/intel/socfpga_diamondmesa.dts
new file mode 100644
index 00000000..eb1af5b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_diamondmesa.dts
@@ -0,0 +1,62 @@ 
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Diamond Mesa Simics";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:4800n8";
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0x4000000>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <100000000>;
+			};
+
+			uart_clk: uart_clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <76800>;
+			};
+
+			mmc_clk: mmc_clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	clocks = <&uart_clk>;
+	status = "okay";
+};
+
+&mmc {
+	clocks = <&mmc_clk>, <&mmc_clk>;
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&watchdog0 {
+	clocks = <&osc1>;
+	status = "okay";
+};