diff mbox series

[V3,RESEND,09/11] usb: gadget: bdc: fix checkpatch.pl tab warning

Message ID 1601014832-29726-9-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [V3,RESEND,01/11] usb: gadget: bdc: fix improper SPDX comment style for header file | expand

Commit Message

Chunfeng Yun (云春峰) Sept. 25, 2020, 6:20 a.m. UTC
WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements
WARNING:TABSTOP: Statements should start on a tabstop

Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3: add acked-by Florian

v2: add Cc Florian
---
 drivers/usb/gadget/udc/bdc/bdc_cmd.c | 2 +-
 drivers/usb/gadget/udc/bdc/bdc_ep.c  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 44c2a5e..995f79c 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -163,7 +163,7 @@  int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep)
 					usb_endpoint_xfer_isoc(desc)) {
 			param2 |= si;
 			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
-					mul = comp_desc->bmAttributes;
+				mul = comp_desc->bmAttributes;
 
 		}
 		param2 |= mul << EPM_SHIFT;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index 3fb36c8..d227d26 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -275,7 +275,7 @@  static inline int find_end_bdi(struct bdc_ep *ep, int next_hwd_bdi)
 	end_bdi = next_hwd_bdi - 1;
 	if (end_bdi < 0)
 		end_bdi = ep->bd_list.max_bdi - 1;
-	 else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0)
+	else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0)
 		end_bdi--;
 
 	return end_bdi;
@@ -795,7 +795,7 @@  static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 			start_pending = true;
 			end_pending = true;
 		} else if (end_bdi >= curr_hw_dqpi || end_bdi <= eqp_bdi) {
-				end_pending = true;
+			end_pending = true;
 		}
 	} else {
 		if (start_bdi >= curr_hw_dqpi) {