diff mbox series

[v5,3/4] ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board

Message ID 1604511132-4014-4-git-send-email-hugues.fruchet@st.com (mailing list archive)
State New, archived
Headers show
Series DCMI BT656 parallel bus mode support | expand

Commit Message

Hugues FRUCHET Nov. 4, 2020, 5:32 p.m. UTC 
Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 85628e1..6cc5d2a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -90,6 +90,7 @@ 
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
+			bus-type = <5>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;