diff mbox series

[LINUX,V3,2/9] dt-bindings: gpio: gpio-xilinx: Add clk support to xilinx soft gpio IP

Message ID 1605201148-4508-3-git-send-email-srinivas.neeli@xilinx.com (mailing list archive)
State New, archived
Headers show
Series gpio-xilinx: Update on xilinx gpio driver | expand

Commit Message

Srinivas Neeli Nov. 12, 2020, 5:12 p.m. UTC 
Specify clock property in binding.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
Changes in V3:
-Created new patch for dt-bindings.
---
 Documentation/devicetree/bindings/gpio/gpio-xilinx.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Linus Walleij Nov. 17, 2020, 11:59 p.m. UTC | #1 
On Thu, Nov 12, 2020 at 6:12 PM Srinivas Neeli
<srinivas.neeli@xilinx.com> wrote:

> Specify clock property in binding.
>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>

Patch applied, consider rewriting this binding in YAML.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
index 08eed2335db0..e506f30e1a95 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
@@ -13,6 +13,7 @@  Required properties:
 - gpio-controller : Marks the device node as a GPIO controller.
 
 Optional properties:
+- clocks : Input clock specifier. Refer to common clock bindings.
 - interrupts : Interrupt mapping for GPIO IRQ.
 - xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
 - xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
@@ -29,6 +30,7 @@  Example:
 gpio: gpio@40000000 {
 	#gpio-cells = <2>;
 	compatible = "xlnx,xps-gpio-1.00.a";
+	clocks = <&clkc25>;
 	gpio-controller ;
 	interrupt-parent = <&microblaze_0_intc>;
 	interrupts = < 6 2 >;