| Message ID | 1609183716-26529-1-git-send-email-tharvey@gateworks.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: mfd: gateworks-gsc: Add fan-tach mode | expand |
On Mon, 28 Dec 2020 11:28:36 -0800, Tim Harvey wrote: > In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode > was added to report RPM's from a fan tach input. > > Add this mode to the dt-bindings for the Gateworks System Controller. > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > Acked-by: Rob Herring <robh@kernel.org>
On Mon, 28 Dec 2020, Tim Harvey wrote: > In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode > was added to report RPM's from a fan tach input. > > Add this mode to the dt-bindings for the Gateworks System Controller. > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) Applied, thanks.
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index d08e8fe..5a1e8d2 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -83,8 +83,9 @@ properties: 2 - scaled voltage based on an optional resistor divider and optional offset 3 - pre-scaled 16-bit voltage value + 4 - fan tach input to report RPM's $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] + enum: [0, 1, 2, 3, 4] gw,voltage-divider-ohms: description: Values of resistors for divider on raw ADC input
In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode was added to report RPM's from a fan tach input. Add this mode to the dt-bindings for the Gateworks System Controller. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)