diff mbox series

[1/4] arm64: dts: imx8mn: add spba bus node of aips3

Message ID 1609243245-9671-2-git-send-email-peng.fan@nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8m: add spda bus | expand

Commit Message

Peng Fan Dec. 29, 2020, noon UTC
From: Peng Fan <peng.fan@nxp.com>

There is a spba bus inside aips3 space, add it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 148 ++++++++++++----------
 1 file changed, 78 insertions(+), 70 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ee1790230490..73602832ccaa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -253,7 +253,7 @@  aips1: bus@30000000 {
 			#size-cells = <1>;
 			ranges;
 
-			spba: bus@30000000 {
+			spba1: bus@30000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -667,81 +667,89 @@  aips3: bus@30800000 {
 			#size-cells = <1>;
 			ranges;
 
-			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+			spba2: bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
-					 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
 
-			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
-					 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
-					 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart1: serial@30860000 {
-				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
-					 <&clk IMX8MN_CLK_UART1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart3: serial@30880000 {
-				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
-					 <&clk IMX8MN_CLK_UART3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+						 <&clk IMX8MN_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart2: serial@30890000 {
-				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
-					 <&clk IMX8MN_CLK_UART2_ROOT>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+						 <&clk IMX8MN_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+						 <&clk IMX8MN_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			}
 
 			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";