diff mbox series

[6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog

Message ID 1615805214-24857-7-git-send-email-srinivas.neeli@xilinx.com (mailing list archive)
State New, archived
Headers show
Series watchdog: of_xilinx_wdt: Update on xilinx watchdog driver | expand

Commit Message

Srinivas Neeli March 15, 2021, 10:46 a.m. UTC 
Updated watchdog binding for Versal window watchdog.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
 .../devicetree/bindings/watchdog/of-xilinx-wdt.txt | 33 ++++++++++++++++++++--
 1 file changed, 30 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
index c6ae9c9d5e3e..57903645d685 100644
--- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
@@ -1,21 +1,37 @@ 
-Xilinx AXI/PLB soft-core watchdog Device Tree Bindings
----------------------------------------------------------
+Xilinx AXI/PLB soft-core watchdog and window watchdog Device Tree Bindings
+--------------------------------------------------------------------------
 
 Required properties:
 - compatible		: Should be "xlnx,xps-timebase-wdt-1.00.a" or
-			  "xlnx,xps-timebase-wdt-1.01.a".
+			  "xlnx,xps-timebase-wdt-1.01.a" or
+			  "xlnx,versal-wwdt-1.0".
 - reg			: Physical base address and size
 
 Optional properties:
 - clocks		: Input clock specifier. Refer to common clock
 			  bindings.
 - clock-frequency	: Frequency of clock in Hz
+
+Optional properties for AXI/PLB soft-core watchdog:
 - xlnx,wdt-enable-once	: 0 - Watchdog can be restarted
 			  1 - Watchdog can be enabled just once
 - xlnx,wdt-interval	: Watchdog timeout interval in 2^<val> clock cycles,
 			  <val> is integer from 8 to 31.
 
+Optional properties for window watchdog:
+- timeout-sec          : Watchdog timeout value (in seconds).
+			 if unset, the default timeout is 10 seconds.
+- pretimeout-sec	: Watchdog pretimeout value in seconds.
+- interrupts		: IRQ line for the WWDT.
+- interrupt-names	: Interrupt line names "wdt" or "wwdt_reset_pending".
+			  wdt - will assert high after first (closed) window
+			  timer expires. wwdt_reset_pending - will assert high
+			  after second (open) window timer expires if WRP
+			  (Watchdog Reset pending) is configured with third
+			  (SST) timer.
+
 Example:
+Xilinx AXI/PLB soft-core watchdog:
 axi-timebase-wdt@40100000 {
 	clock-frequency = <50000000>;
 	compatible = "xlnx,xps-timebase-wdt-1.00.a";
@@ -24,3 +40,14 @@  axi-timebase-wdt@40100000 {
 	xlnx,wdt-enable-once = <0x0>;
 	xlnx,wdt-interval = <0x1b>;
 } ;
+
+Xilinx Versal window watchdog:
+watchdog@fd4d0000 {
+	compatible = "xlnx,versal-wwdt-1.0";
+	reg = <0x0 0xfd4d0000 0x0 0x10000>;
+	clocks = <&clk25>;
+	timeout-sec = <10>;
+	interrupt-names = "wdt", "wwdt_reset_pending";
+	interrupts = <0x0 0x64 0x1>, <0x0 0x6D 0x1>;
+	pretimeout-sec = <5>;
+} ;