diff mbox series

[v6,4/8] dt-bindings: regulator: Add document for MT6359 regulator

Message ID 1615829757-3223-5-git-send-email-hsin-hsiung.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add Support for MediaTek PMIC MT6359 | expand

Commit Message

Hsin-hsiung Wang March 15, 2021, 5:35 p.m. UTC
add dt-binding document for MediaTek MT6359 PMIC

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
changes since v5:
- no change.
---
 .../bindings/regulator/mt6359-regulator.yaml  | 169 ++++++++++++++++++
 1 file changed, 169 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml

Comments

Rob Herring March 16, 2021, 5:54 p.m. UTC | #1
On Tue, 16 Mar 2021 01:35:53 +0800, Hsin-Hsiung Wang wrote:
> add dt-binding document for MediaTek MT6359 PMIC
> 
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> changes since v5:
> - no change.
> ---
>  .../bindings/regulator/mt6359-regulator.yaml  | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dt.yaml: pmic: 'adc', 'compatible' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc@480' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc@197' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml

See https://patchwork.ozlabs.org/patch/1453404

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring March 16, 2021, 9:28 p.m. UTC | #2
On Tue, Mar 16, 2021 at 01:35:53AM +0800, Hsin-Hsiung Wang wrote:
> add dt-binding document for MediaTek MT6359 PMIC
> 
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> changes since v5:
> - no change.
> ---
>  .../bindings/regulator/mt6359-regulator.yaml  | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> new file mode 100644
> index 000000000000..62ff93eefd39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT6359 Regulator from MediaTek Integrated
> +
> +maintainers:
> +  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> +
> +description: |
> +  List of regulators provided by this controller. It is named
> +  according to its regulator type, buck_<name> and ldo_<name>.
> +  MT6359 regulators node should be sub node of the MT6397 MFD node.
> +
> +properties:
> +  $nodename:
> +    pattern: "^pmic$"

The errors are because this schema will be applied to every 'pmic' node.

> +
> +  mt6359regulator:

The node name here should be just 'regulators', but that should be in 
the MFD schema and you should remove this level here. So the MFD would 
have:

properties:
  regulators:
    type: object
    $ref: schemas/regulator/mt6359-regulator.yaml#

> +    type: object
> +    description:
> +      list of regulators provided by this controller.
> +
> +    patternProperties:

And this should be at the top level of this doc.

> +      "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_v(fe|bif|io)28$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(fe|bif|io)28$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_v(aud|io|aux|rf|m)18$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(aud|io|aux|rf|m)18$"
> +
> +        unevaluatedProperties: false
> +
> +      "^ldo_vsim[12]$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vsim[12]$"
> +
> +        required:
> +          - regulator-name
> +
> +        unevaluatedProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pmic {
> +      mt6359regulator {

I prefer to see a single complete example in the MFD schema rather than 
piecemeal schemas in each sub schema.

> +        mt6359_vgpu11_buck_reg: buck_vgpu11 {
> +          regulator-name = "vgpu11";
> +          regulator-min-microvolt = <400000>;
> +          regulator-max-microvolt = <1193750>;
> +          regulator-enable-ramp-delay = <200>;
> +          regulator-always-on;
> +          regulator-allowed-modes = <0 1 2>;
> +        };
> +
> +        mt6359_vcamio_ldo_reg: ldo_vcamio {
> +          regulator-name = "vcamio";
> +          regulator-min-microvolt = <1700000>;
> +          regulator-max-microvolt = <1900000>;
> +        };
> +
> +        mt6359_vcn18_ldo_reg: ldo_vcn18 {
> +          regulator-name = "vcn18";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <1800000>;
> +          regulator-enable-ramp-delay = <240>;
> +        };
> +
> +        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> +          regulator-name = "vsram_proc2";
> +          regulator-min-microvolt = <500000>;
> +          regulator-max-microvolt = <1293750>;
> +          regulator-ramp-delay = <7500>;
> +          regulator-enable-ramp-delay = <240>;
> +          regulator-always-on;
> +        };
> +
> +        mt6359_vfe28_ldo_reg: ldo_vfe28 {
> +          regulator-name = "vfe28";
> +          regulator-min-microvolt = <2800000>;
> +          regulator-max-microvolt = <2800000>;
> +          regulator-enable-ramp-delay = <120>;
> +        };
> +
> +        mt6359_vaud18_ldo_reg: ldo_vaud18 {
> +          regulator-name = "vaud18";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <1800000>;
> +          regulator-enable-ramp-delay = <240>;
> +        };
> +
> +        mt6359_vsim1_ldo_reg: ldo_vsim1 {
> +          regulator-name = "vsim1";
> +          regulator-min-microvolt = <1700000>;
> +          regulator-max-microvolt = <3100000>;
> +          regulator-enable-ramp-delay = <480>;
> +        };
> +      };
> +    };
> +...
> -- 
> 2.18.0
>
Hsin-hsiung Wang March 17, 2021, 6:01 a.m. UTC | #3
Hi, Rob
I am very grateful for the reviewing which addressed my yaml errors.
I will check my codebase first and fix the error in the next patch.

Thanks.

On Tue, 2021-03-16 at 15:28 -0600, Rob Herring wrote:
> On Tue, Mar 16, 2021 at 01:35:53AM +0800, Hsin-Hsiung Wang wrote:
> > add dt-binding document for MediaTek MT6359 PMIC
> > 
> > Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> > ---
> > changes since v5:
> > - no change.
> > ---
> >  .../bindings/regulator/mt6359-regulator.yaml  | 169 ++++++++++++++++++
> >  1 file changed, 169 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > new file mode 100644
> > index 000000000000..62ff93eefd39
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > @@ -0,0 +1,169 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MT6359 Regulator from MediaTek Integrated
> > +
> > +maintainers:
> > +  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> > +
> > +description: |
> > +  List of regulators provided by this controller. It is named
> > +  according to its regulator type, buck_<name> and ldo_<name>.
> > +  MT6359 regulators node should be sub node of the MT6397 MFD node.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^pmic$"
> 
> The errors are because this schema will be applied to every 'pmic' node.
> 
> > +
> > +  mt6359regulator:
> 
> The node name here should be just 'regulators', but that should be in 
> the MFD schema and you should remove this level here. So the MFD would 
> have:
> 
> properties:
>   regulators:
>     type: object
>     $ref: schemas/regulator/mt6359-regulator.yaml#
> 
> > +    type: object
> > +    description:
> > +      list of regulators provided by this controller.
> > +
> > +    patternProperties:
> 
> And this should be at the top level of this doc.
> 
> > +      "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(fe|bif|io)28$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(fe|bif|io)28$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(aud|io|aux|rf|m)18$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(aud|io|aux|rf|m)18$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vsim[12]$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vsim[12]$"
> > +
> > +        required:
> > +          - regulator-name
> > +
> > +        unevaluatedProperties: false
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    pmic {
> > +      mt6359regulator {
> 
> I prefer to see a single complete example in the MFD schema rather than 
> piecemeal schemas in each sub schema.
> 
> > +        mt6359_vgpu11_buck_reg: buck_vgpu11 {
> > +          regulator-name = "vgpu11";
> > +          regulator-min-microvolt = <400000>;
> > +          regulator-max-microvolt = <1193750>;
> > +          regulator-enable-ramp-delay = <200>;
> > +          regulator-always-on;
> > +          regulator-allowed-modes = <0 1 2>;
> > +        };
> > +
> > +        mt6359_vcamio_ldo_reg: ldo_vcamio {
> > +          regulator-name = "vcamio";
> > +          regulator-min-microvolt = <1700000>;
> > +          regulator-max-microvolt = <1900000>;
> > +        };
> > +
> > +        mt6359_vcn18_ldo_reg: ldo_vcn18 {
> > +          regulator-name = "vcn18";
> > +          regulator-min-microvolt = <1800000>;
> > +          regulator-max-microvolt = <1800000>;
> > +          regulator-enable-ramp-delay = <240>;
> > +        };
> > +
> > +        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> > +          regulator-name = "vsram_proc2";
> > +          regulator-min-microvolt = <500000>;
> > +          regulator-max-microvolt = <1293750>;
> > +          regulator-ramp-delay = <7500>;
> > +          regulator-enable-ramp-delay = <240>;
> > +          regulator-always-on;
> > +        };
> > +
> > +        mt6359_vfe28_ldo_reg: ldo_vfe28 {
> > +          regulator-name = "vfe28";
> > +          regulator-min-microvolt = <2800000>;
> > +          regulator-max-microvolt = <2800000>;
> > +          regulator-enable-ramp-delay = <120>;
> > +        };
> > +
> > +        mt6359_vaud18_ldo_reg: ldo_vaud18 {
> > +          regulator-name = "vaud18";
> > +          regulator-min-microvolt = <1800000>;
> > +          regulator-max-microvolt = <1800000>;
> > +          regulator-enable-ramp-delay = <240>;
> > +        };
> > +
> > +        mt6359_vsim1_ldo_reg: ldo_vsim1 {
> > +          regulator-name = "vsim1";
> > +          regulator-min-microvolt = <1700000>;
> > +          regulator-max-microvolt = <3100000>;
> > +          regulator-enable-ramp-delay = <480>;
> > +        };
> > +      };
> > +    };
> > +...
> > -- 
> > 2.18.0
> >
Hsin-hsiung Wang March 29, 2021, 11:13 a.m. UTC | #4
Hi,

On Tue, 2021-03-16 at 15:28 -0600, Rob Herring wrote:
> On Tue, Mar 16, 2021 at 01:35:53AM +0800, Hsin-Hsiung Wang wrote:
> > add dt-binding document for MediaTek MT6359 PMIC
> > 
> > Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> > ---
> > changes since v5:
> > - no change.
> > ---
> >  .../bindings/regulator/mt6359-regulator.yaml  | 169 ++++++++++++++++++
> >  1 file changed, 169 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > new file mode 100644
> > index 000000000000..62ff93eefd39
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
> > @@ -0,0 +1,169 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MT6359 Regulator from MediaTek Integrated
> > +
> > +maintainers:
> > +  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> > +
> > +description: |
> > +  List of regulators provided by this controller. It is named
> > +  according to its regulator type, buck_<name> and ldo_<name>.
> > +  MT6359 regulators node should be sub node of the MT6397 MFD node.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^pmic$"
> 
> The errors are because this schema will be applied to every 'pmic' node.
> 
> > +
> > +  mt6359regulator:
> 
> The node name here should be just 'regulators', but that should be in 
> the MFD schema and you should remove this level here. So the MFD would 
> have:
> 
> properties:
>   regulators:
>     type: object
>     $ref: schemas/regulator/mt6359-regulator.yaml#
> 
> > +    type: object
> > +    description:
> > +      list of regulators provided by this controller.
> > +
> > +    patternProperties:
> 
> And this should be at the top level of this doc.
> 
> > +      "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(fe|bif|io)28$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(fe|bif|io)28$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_v(aud|io|aux|rf|m)18$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^v(aud|io|aux|rf|m)18$"
> > +
> > +        unevaluatedProperties: false
> > +
> > +      "^ldo_vsim[12]$":
> > +        type: object
> > +        $ref: "regulator.yaml#"
> > +
> > +        properties:
> > +          regulator-name:
> > +            pattern: "^vsim[12]$"
> > +
> > +        required:
> > +          - regulator-name
> > +
> > +        unevaluatedProperties: false
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    pmic {
> > +      mt6359regulator {
> 
> I prefer to see a single complete example in the MFD schema rather than 
> piecemeal schemas in each sub schema.
> 

Thanks for your comment.
However, MT6397 mfd driver supports several mediatek pmics which have
different regulator capability, so it is hard to list all regulators of
each pmic in the MFD schema.

Thanks.

> > +        mt6359_vgpu11_buck_reg: buck_vgpu11 {
> > +          regulator-name = "vgpu11";
> > +          regulator-min-microvolt = <400000>;
> > +          regulator-max-microvolt = <1193750>;
> > +          regulator-enable-ramp-delay = <200>;
> > +          regulator-always-on;
> > +          regulator-allowed-modes = <0 1 2>;
> > +        };
> > +
> > +        mt6359_vcamio_ldo_reg: ldo_vcamio {
> > +          regulator-name = "vcamio";
> > +          regulator-min-microvolt = <1700000>;
> > +          regulator-max-microvolt = <1900000>;
> > +        };
> > +
> > +        mt6359_vcn18_ldo_reg: ldo_vcn18 {
> > +          regulator-name = "vcn18";
> > +          regulator-min-microvolt = <1800000>;
> > +          regulator-max-microvolt = <1800000>;
> > +          regulator-enable-ramp-delay = <240>;
> > +        };
> > +
> > +        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> > +          regulator-name = "vsram_proc2";
> > +          regulator-min-microvolt = <500000>;
> > +          regulator-max-microvolt = <1293750>;
> > +          regulator-ramp-delay = <7500>;
> > +          regulator-enable-ramp-delay = <240>;
> > +          regulator-always-on;
> > +        };
> > +
> > +        mt6359_vfe28_ldo_reg: ldo_vfe28 {
> > +          regulator-name = "vfe28";
> > +          regulator-min-microvolt = <2800000>;
> > +          regulator-max-microvolt = <2800000>;
> > +          regulator-enable-ramp-delay = <120>;
> > +        };
> > +
> > +        mt6359_vaud18_ldo_reg: ldo_vaud18 {
> > +          regulator-name = "vaud18";
> > +          regulator-min-microvolt = <1800000>;
> > +          regulator-max-microvolt = <1800000>;
> > +          regulator-enable-ramp-delay = <240>;
> > +        };
> > +
> > +        mt6359_vsim1_ldo_reg: ldo_vsim1 {
> > +          regulator-name = "vsim1";
> > +          regulator-min-microvolt = <1700000>;
> > +          regulator-max-microvolt = <3100000>;
> > +          regulator-enable-ramp-delay = <480>;
> > +        };
> > +      };
> > +    };
> > +...
> > -- 
> > 2.18.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
new file mode 100644
index 000000000000..62ff93eefd39
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -0,0 +1,169 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6359 Regulator from MediaTek Integrated
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6359 regulators node should be sub node of the MT6397 MFD node.
+
+properties:
+  $nodename:
+    pattern: "^pmic$"
+
+  mt6359regulator:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    patternProperties:
+      "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
+
+        unevaluatedProperties: false
+
+      "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
+
+        unevaluatedProperties: false
+
+      "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
+
+        unevaluatedProperties: false
+
+      "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
+
+        unevaluatedProperties: false
+
+      "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
+
+        unevaluatedProperties: false
+
+      "^ldo_v(fe|bif|io)28$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^v(fe|bif|io)28$"
+
+        unevaluatedProperties: false
+
+      "^ldo_v(aud|io|aux|rf|m)18$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^v(aud|io|aux|rf|m)18$"
+
+        unevaluatedProperties: false
+
+      "^ldo_vsim[12]$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^vsim[12]$"
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      mt6359regulator {
+        mt6359_vgpu11_buck_reg: buck_vgpu11 {
+          regulator-name = "vgpu11";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-always-on;
+          regulator-allowed-modes = <0 1 2>;
+        };
+
+        mt6359_vcamio_ldo_reg: ldo_vcamio {
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+
+        mt6359_vcn18_ldo_reg: ldo_vcn18 {
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+
+        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+          regulator-name = "vsram_proc2";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+
+        mt6359_vfe28_ldo_reg: ldo_vfe28 {
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <120>;
+        };
+
+        mt6359_vaud18_ldo_reg: ldo_vaud18 {
+          regulator-name = "vaud18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+
+        mt6359_vsim1_ldo_reg: ldo_vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <480>;
+        };
+      };
+    };
+...