diff mbox series

[V7,2/2] doc: mtk-wdt: support pre-timeout when the bark irq is available

Message ID 1619146403-12769-3-git-send-email-wangqing@vivo.com (mailing list archive)
State New, archived
Headers show
Series watchdog: mtk: support pre-timeout when the bark irq is available | expand

Commit Message

Wang Qing April 23, 2021, 2:53 a.m. UTC
Add description of pre-timeout in mtk-wdt.

Signed-off-by: Wang Qing <wangqing@vivo.com>
---
 Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index e36ba60..8e27777
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -1,5 +1,8 @@ 
 Mediatek SoCs Watchdog timer
 
+The watchdog supports a pre-timeout interrupt that fires timeout-sec/2
+before the expiry.
+
 Required properties:
 
 - compatible should contain:
@@ -17,6 +20,7 @@  Required properties:
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
+- interrupts: Watchdog pre-timeout (bark) interrupt.
 - timeout-sec: contains the watchdog timeout in seconds.
 - #reset-cells: Should be 1.
 
@@ -26,6 +30,7 @@  watchdog: watchdog@10007000 {
 	compatible = "mediatek,mt8183-wdt",
 		     "mediatek,mt6589-wdt";
 	reg = <0 0x10007000 0 0x100>;
+	interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 	timeout-sec = <10>;
 	#reset-cells = <1>;
 };