From patchwork Tue Oct 12 08:41:14 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hongxing Zhu X-Patchwork-Id: 12551767 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D8F47C433F5 for ; Tue, 12 Oct 2021 09:08:53 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A43F261039 for ; Tue, 12 Oct 2021 09:08:53 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org A43F261039 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=nxp.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:List-Subscribe:List-Help: List-Post:List-Archive:List-Unsubscribe:List-Id:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=cEmWnD/p0V7LJTjndgi9B66SyNRKh24Uqmjy/Zg1kSE=; b=My9CF0sbqJ5MLc XT02MTgSCr301PXTP0FmwANVAgKjR7W5c/vxdNg/TRpIewnYSxFxs/OCHDjcD/J3iOXYT7wnNUYze C8I+g4gSzdIk/DrEWim5M4PUId2kYJr/DJi5CIY9W/bwcYFVfNETn3FZ/E3oa/WkPaalWtNRh9OVX qdFVPCBdIOVoX5O2+Qo1TghuCcTD7uhN5QidjihYLUdj2644As39TtTPtl26j2KITGPlyIDgbrcyj CUGVHkcD1X+Ss8042tjrhUA7r/R07ZrFvpHkynwCWxX+szRofdzfbBSbxh4crwPjDH3az0EWDObi6 U2NVFYEFG22226A59msQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1maDku-00C9L4-S2; Tue, 12 Oct 2021 09:07:29 +0000 Received: from inva020.nxp.com ([92.121.34.13]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1maDjg-00C8rK-Mx; Tue, 12 Oct 2021 09:06:15 +0000 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 56C871A248C; Tue, 12 Oct 2021 11:06:11 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id F301D1A2485; Tue, 12 Oct 2021 11:06:10 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id A6489183AD05; Tue, 12 Oct 2021 17:06:09 +0800 (+08) From: Richard Zhu To: l.stach@pengutronix.de, tharvey@gateworks.com, kishon@ti.com, vkoul@kernel.org, robh@kernel.org, galak@kernel.crashing.org, shawnguo@kernel.org Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, linux-imx@nxp.com, Richard Zhu Subject: [PATCH v3 5/9] phy: freescale: pcie: initialize the imx8 pcie standalone phy driver Date: Tue, 12 Oct 2021 16:41:14 +0800 Message-Id: <1634028078-2387-6-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1634028078-2387-1-git-send-email-hongxing.zhu@nxp.com> References: <1634028078-2387-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211012_020613_114188_51BB77A0 X-CRM114-Status: GOOD ( 22.01 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add the standalone i.MX8 PCIe PHY driver. Some reset bits should be manipulated between PHY configurations and status check(internal PLL is locked or not). So, do the PHY configuration in the phy_calibrate(). And check the PHY is ready or not in the phy_init(). Signed-off-by: Richard Zhu --- drivers/phy/freescale/Kconfig | 9 + drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 218 +++++++++++++++++++++ 3 files changed, 228 insertions(+) create mode 100644 drivers/phy/freescale/phy-fsl-imx8m-pcie.c diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig index 320630ffe3cd..fb08e5242602 100644 --- a/drivers/phy/freescale/Kconfig +++ b/drivers/phy/freescale/Kconfig @@ -14,3 +14,12 @@ config PHY_MIXEL_MIPI_DPHY help Enable this to add support for the Mixel DSI PHY as found on NXP's i.MX8 family of SOCs. + +config PHY_FSL_IMX8M_PCIE + tristate "Freescale i.MX8 PCIE PHY" + depends on OF && HAS_IOMEM + select GENERIC_PHY + default ARCH_MXC + help + Enable this to add support for the PCIE PHY as found on + i.MX8M family of SOCs. diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile index 1d02e3869b45..55d07c742ab0 100644 --- a/drivers/phy/freescale/Makefile +++ b/drivers/phy/freescale/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o +obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c new file mode 100644 index 000000000000..317cf61bff37 --- /dev/null +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IMX8MM_PCIE_PHY_CMN_REG061 0x184 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_EN BIT(0) +#define IMX8MM_PCIE_PHY_CMN_REG062 0x188 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_SEL BIT(3) +#define IMX8MM_PCIE_PHY_CMN_REG063 0x18C +#define AUX_PLL_REFCLK_SEL_SYS_PLL GENMASK(7, 6) +#define IMX8MM_PCIE_PHY_CMN_REG064 0x190 +#define ANA_AUX_RX_TX_SEL_TX BIT(7) +#define ANA_AUX_RX_TERM_GND_EN BIT(3) +#define ANA_AUX_TX_TERM BIT(2) +#define IMX8MM_PCIE_PHY_CMN_REG065 0x194 +#define ANA_AUX_RX_TERM (BIT(7) | BIT(4)) +#define ANA_AUX_TX_LVL GENMASK(3, 0) +#define IMX8MM_PCIE_PHY_CMN_REG75 0x1D4 +#define PCIE_PHY_CMN_REG75_PLL_DONE 0x3 +#define PCIE_PHY_TRSV_REG5 0x414 +#define PCIE_PHY_TRSV_REG5_GEN1_DEEMP 0x2D +#define PCIE_PHY_TRSV_REG6 0x418 +#define PCIE_PHY_TRSV_REG6_GEN2_DEEMP 0xF + +#define IMX8MM_GPR_PCIE_REF_CLK_SEL GENMASK(25, 24) +#define IMX8MM_GPR_PCIE_REF_CLK_PLL FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3) +#define IMX8MM_GPR_PCIE_REF_CLK_EXT FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x2) +#define IMX8MM_GPR_PCIE_AUX_EN BIT(19) +#define IMX8MM_GPR_PCIE_CMN_RST BIT(18) +#define IMX8MM_GPR_PCIE_POWER_OFF BIT(17) +#define IMX8MM_GPR_PCIE_SSC_EN BIT(16) +#define IMX8MM_GPR_PCIE_REF_USE_PAD BIT(9) + +struct imx8_pcie_phy { + u32 refclk_pad_mode; + void __iomem *base; + struct clk *clk; + struct phy *phy; + struct regmap *iomuxc_gpr; + struct reset_control *reset; +}; + +static int imx8_pcie_phy_init(struct phy *phy) +{ + int ret; + u32 val, pad_mode; + struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy); + + reset_control_assert(imx8_phy->reset); + + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_REF_USE_PAD, + imx8_phy->refclk_pad_mode == 1 ? + IMX8MM_GPR_PCIE_REF_USE_PAD : 0); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_AUX_EN, + IMX8MM_GPR_PCIE_AUX_EN); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_POWER_OFF, 0); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_SSC_EN, 0); + + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_REF_CLK_SEL, + imx8_phy->refclk_pad_mode == 1 ? + IMX8MM_GPR_PCIE_REF_CLK_EXT : + IMX8MM_GPR_PCIE_REF_CLK_PLL); + usleep_range(100, 200); + + /* Do the PHY common block reset */ + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14, + IMX8MM_GPR_PCIE_CMN_RST, + IMX8MM_GPR_PCIE_CMN_RST); + usleep_range(200, 500); + + + pad_mode = imx8_phy->refclk_pad_mode; + if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT) { + /* Configure the pad as input */ + val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + } else if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT) { + /* Configure the PHY to output the refclock via pad */ + writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062); + writel(AUX_PLL_REFCLK_SEL_SYS_PLL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063); + val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM; + writel(val | ANA_AUX_RX_TERM_GND_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064); + writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065); + } + + /* Tune PHY de-emphasis setting to pass PCIe compliance. */ + writel(PCIE_PHY_TRSV_REG5_GEN1_DEEMP, + imx8_phy->base + PCIE_PHY_TRSV_REG5); + writel(PCIE_PHY_TRSV_REG6_GEN2_DEEMP, + imx8_phy->base + PCIE_PHY_TRSV_REG6); + + reset_control_deassert(imx8_phy->reset); + + /* Polling to check the phy is ready or not. */ + ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75, + val, val == PCIE_PHY_CMN_REG75_PLL_DONE, + 10, 20000); + return ret; +} + +static int imx8_pcie_phy_power_on(struct phy *phy) +{ + struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy); + + return clk_prepare_enable(imx8_phy->clk); +} + +static int imx8_pcie_phy_power_off(struct phy *phy) +{ + struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy); + + clk_disable_unprepare(imx8_phy->clk); + + return 0; +} + +static const struct phy_ops imx8_pcie_phy_ops = { + .init = imx8_pcie_phy_init, + .power_on = imx8_pcie_phy_power_on, + .power_off = imx8_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static int imx8_pcie_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct imx8_pcie_phy *imx8_phy; + struct resource *res; + + imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL); + if (!imx8_phy) + return -ENOMEM; + + /* get PHY refclk pad mode */ + of_property_read_u32(np, "fsl,refclk-pad-mode", + &imx8_phy->refclk_pad_mode); + + imx8_phy->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(imx8_phy->clk)) { + dev_err(dev, "failed to get imx pcie phy clock\n"); + return PTR_ERR(imx8_phy->clk); + } + + /* Grab GPR config register range */ + imx8_phy->iomuxc_gpr = + syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imx8_phy->iomuxc_gpr)) { + dev_err(dev, "unable to find iomuxc registers\n"); + return PTR_ERR(imx8_phy->iomuxc_gpr); + } + + imx8_phy->reset = devm_reset_control_get_exclusive(dev, "pciephy"); + if (IS_ERR(imx8_phy->reset)) { + dev_err(dev, "Failed to get PCIEPHY reset control\n"); + return PTR_ERR(imx8_phy->reset); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + imx8_phy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(imx8_phy->base)) + return PTR_ERR(imx8_phy->base); + + imx8_phy->phy = devm_phy_create(dev, NULL, &imx8_pcie_phy_ops); + if (IS_ERR(imx8_phy->phy)) + return PTR_ERR(imx8_phy->phy); + + phy_set_drvdata(imx8_phy->phy, imx8_phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id imx8_pcie_phy_of_match[] = { + {.compatible = "fsl,imx8mm-pcie-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match); + +static struct platform_driver imx8_pcie_phy_driver = { + .probe = imx8_pcie_phy_probe, + .driver = { + .name = "imx8-pcie-phy", + .of_match_table = imx8_pcie_phy_of_match, + } +}; +module_platform_driver(imx8_pcie_phy_driver); + +MODULE_DESCRIPTION("FSL IMX8 PCIE PHY driver"); +MODULE_LICENSE("GPL");