diff mbox series

[v3,6/7] PCI: imx6: Fix the reference handling unbalance when link never came up

Message ID 1634886750-13861-7-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State New, archived
Headers show
Series PCI: imx6: refine codes and add compliance tests mode support | expand

Commit Message

Hongxing Zhu Oct. 22, 2021, 7:12 a.m. UTC 
When link never came up, driver probe would be failed with error -110.
To keep usage counter balance of the clocks, powers and so on.

Add a new host_exit() callback for i.MX PCIe driver to handle this case
in the error handling after host_init.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index b752a673e767..c723df053574 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -875,7 +875,6 @@  static int imx6_pcie_start_link(struct dw_pcie *pci)
 	dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
 		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
 		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
-	imx6_pcie_reset_phy(imx6_pcie);
 	return ret;
 }
 
@@ -899,8 +898,20 @@  static int imx6_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
+static void imx6_pcie_host_exit(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+	imx6_pcie_reset_phy(imx6_pcie);
+	imx6_pcie_clk_disable(imx6_pcie);
+	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
+		regulator_disable(imx6_pcie->vpcie);
+}
+
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
 	.host_init = imx6_pcie_host_init,
+	.host_exit = imx6_pcie_host_exit,
 };
 
 static const struct dw_pcie_ops dw_pcie_ops = {
@@ -1180,12 +1191,8 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 		return ret;
 
 	ret = dw_pcie_host_init(&pci->pp);
-	if (ret < 0) {
-		if (imx6_pcie->vpcie
-		    && regulator_is_enabled(imx6_pcie->vpcie) > 0)
-			regulator_disable(imx6_pcie->vpcie);
+	if (ret < 0)
 		return ret;
-	}
 
 	if (pci_msi_enabled()) {
 		u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);