| Message ID | 1640606743-10993-3-git-send-email-stefan.wahren@i2se.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dmaengine: bcm2835: add BCM2711 40-bit DMA support | expand |
On Mon, Dec 27, 2021 at 01:05:36PM +0100, Stefan Wahren wrote: > This convert the BCM2835 DMA bindings to YAML format. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > .../devicetree/bindings/dma/brcm,bcm2835-dma.txt | 83 ---------------- > .../devicetree/bindings/dma/brcm,bcm2835-dma.yaml | 107 +++++++++++++++++++++ > 2 files changed, 107 insertions(+), 83 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt > create mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt > deleted file mode 100644 > index b6a8cc0..0000000 > --- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt > +++ /dev/null > @@ -1,83 +0,0 @@ > -* BCM2835 DMA controller > - > -The BCM2835 DMA controller has 16 channels in total. > -Only the lower 13 channels have an associated IRQ. > -Some arbitrary channels are used by the firmware > -(1,3,6,7 in the current firmware version). > -The channels 0,2 and 3 have special functionality > -and should not be used by the driver. > - > -Required properties: > -- compatible: Should be "brcm,bcm2835-dma". > -- reg: Should contain DMA registers location and length. > -- interrupts: Should contain the DMA interrupts associated > - to the DMA channels in ascending order. > -- interrupt-names: Should contain the names of the interrupt > - in the form "dmaXX". > - Use "dma-shared-all" for the common interrupt line > - that is shared by all dma channels. > -- #dma-cells: Must be <1>, the cell in the dmas property of the > - client device represents the DREQ number. > -- brcm,dma-channel-mask: Bit mask representing the channels > - not used by the firmware in ascending order, > - i.e. first channel corresponds to LSB. > - > -Example: > - > -dma: dma@7e007000 { > - compatible = "brcm,bcm2835-dma"; > - reg = <0x7e007000 0xf00>; > - interrupts = <1 16>, > - <1 17>, > - <1 18>, > - <1 19>, > - <1 20>, > - <1 21>, > - <1 22>, > - <1 23>, > - <1 24>, > - <1 25>, > - <1 26>, > - /* dma channel 11-14 share one irq */ > - <1 27>, > - <1 27>, > - <1 27>, > - <1 27>, > - /* unused shared irq for all channels */ > - <1 28>; > - interrupt-names = "dma0", > - "dma1", > - "dma2", > - "dma3", > - "dma4", > - "dma5", > - "dma6", > - "dma7", > - "dma8", > - "dma9", > - "dma10", > - "dma11", > - "dma12", > - "dma13", > - "dma14", > - "dma-shared-all"; > - > - #dma-cells = <1>; > - brcm,dma-channel-mask = <0x7f35>; > -}; > - > - > -DMA clients connected to the BCM2835 DMA controller must use the format > -described in the dma.txt file, using a two-cell specifier for each channel. > - > -Example: > - > -bcm2835_i2s: i2s@7e203000 { > - compatible = "brcm,bcm2835-i2s"; > - reg = < 0x7e203000 0x24>; > - clocks = <&clocks BCM2835_CLOCK_PCM>; > - > - dmas = <&dma 2>, > - <&dma 3>; > - dma-names = "tx", "rx"; > -}; > diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml > new file mode 100644 > index 0000000..44cb83f > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml > @@ -0,0 +1,107 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: BCM2835 DMA controller > + > +maintainers: > + - Nicolas Saenz Julienne <nsaenz@kernel.org> > + > +description: | Don't need '|' unless there is formatting to preserve. > + The BCM2835 DMA controller has 16 channels in total. > + Only the lower 13 channels have an associated IRQ. > + Some arbitrary channels are used by the firmware > + (1,3,6,7 in the current firmware version). > + The channels 0,2 and 3 have special functionality > + and should not be used by the driver. Re-wrap the lines. > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + compatible: > + const: brcm,bcm2835-dma > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: > + Should contain the DMA interrupts associated to the DMA channels in > + ascending order. > + minItems: 1 > + maxItems: 16 > + > + interrupt-names: > + minItems: 1 > + maxItems: 16 The names must be defined. You can do: items: pattern: ... > + > + "#dma-cells": > + const: 1 > + description: > > + DMA clients must use the format described in dma.txt, giving a phandle Please read dma.txt. > + to the DMA controller while the second cell in the dmas property of the Cells don't include the phandle, so 'second cell' is odd. Reword all this to be just what is specific to this binding. > + client device represents the DREQ number. > + > + brcm,dma-channel-mask: > + description: > + Bit mask representing the channels not used by the firmware in > + ascending order, i.e. first channel corresponds to LSB. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + - "#dma-cells" > + - brcm,dma-channel-mask > + > +additionalProperties: false > + > +examples: > + - | > + dma: dma-controller@7e007000 { > + compatible = "brcm,bcm2835-dma"; > + reg = <0x7e007000 0xf00>; > + interrupts = <1 16>, > + <1 17>, > + <1 18>, > + <1 19>, > + <1 20>, > + <1 21>, > + <1 22>, > + <1 23>, > + <1 24>, > + <1 25>, > + <1 26>, > + /* dma channel 11-14 share one irq */ > + <1 27>, > + <1 27>, > + <1 27>, > + <1 27>, > + /* unused shared irq for all channels */ > + <1 28>; > + interrupt-names = "dma0", > + "dma1", > + "dma2", > + "dma3", > + "dma4", > + "dma5", > + "dma6", > + "dma7", > + "dma8", > + "dma9", > + "dma10", > + "dma11", > + "dma12", > + "dma13", > + "dma14", > + "dma-shared-all"; > + #dma-cells = <1>; > + brcm,dma-channel-mask = <0x7f35>; > + }; > + > +... > -- > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt deleted file mode 100644 index b6a8cc0..0000000 --- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +++ /dev/null @@ -1,83 +0,0 @@ -* BCM2835 DMA controller - -The BCM2835 DMA controller has 16 channels in total. -Only the lower 13 channels have an associated IRQ. -Some arbitrary channels are used by the firmware -(1,3,6,7 in the current firmware version). -The channels 0,2 and 3 have special functionality -and should not be used by the driver. - -Required properties: -- compatible: Should be "brcm,bcm2835-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain the DMA interrupts associated - to the DMA channels in ascending order. -- interrupt-names: Should contain the names of the interrupt - in the form "dmaXX". - Use "dma-shared-all" for the common interrupt line - that is shared by all dma channels. -- #dma-cells: Must be <1>, the cell in the dmas property of the - client device represents the DREQ number. -- brcm,dma-channel-mask: Bit mask representing the channels - not used by the firmware in ascending order, - i.e. first channel corresponds to LSB. - -Example: - -dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; -}; - - -DMA clients connected to the BCM2835 DMA controller must use the format -described in the dma.txt file, using a two-cell specifier for each channel. - -Example: - -bcm2835_i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; - reg = < 0x7e203000 0x24>; - clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml new file mode 100644 index 0000000..44cb83f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 DMA controller + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +description: | + The BCM2835 DMA controller has 16 channels in total. + Only the lower 13 channels have an associated IRQ. + Some arbitrary channels are used by the firmware + (1,3,6,7 in the current firmware version). + The channels 0,2 and 3 have special functionality + and should not be used by the driver. + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: brcm,bcm2835-dma + + reg: + maxItems: 1 + + interrupts: + description: + Should contain the DMA interrupts associated to the DMA channels in + ascending order. + minItems: 1 + maxItems: 16 + + interrupt-names: + minItems: 1 + maxItems: 16 + + "#dma-cells": + const: 1 + description: > + DMA clients must use the format described in dma.txt, giving a phandle + to the DMA controller while the second cell in the dmas property of the + client device represents the DREQ number. + + brcm,dma-channel-mask: + description: + Bit mask representing the channels not used by the firmware in + ascending order, i.e. first channel corresponds to LSB. + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + - brcm,dma-channel-mask + +additionalProperties: false + +examples: + - | + dma: dma-controller@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + +...
This convert the BCM2835 DMA bindings to YAML format. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- .../devicetree/bindings/dma/brcm,bcm2835-dma.txt | 83 ---------------- .../devicetree/bindings/dma/brcm,bcm2835-dma.yaml | 107 +++++++++++++++++++++ 2 files changed, 107 insertions(+), 83 deletions(-) delete mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt create mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml