| Message ID | 1660229343-14133-1-git-send-email-fengzheng923@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v8,1/2] ASoC: sunxi: Add Allwinner H6 Digital MIC driver | expand |
On 8/11/2022 4:49 PM, Ban Tao wrote: > The Allwinner H6 and later SoCs have an DMIC block > which is capable of capture. > > Signed-off-by: Ban Tao <fengzheng923@gmail.com> > --- ... > + > +#define SUN50I_DMIC_RATES (SNDRV_PCM_RATE_8000_48000) Seeing supported rates in hw_params callback, you probably want to take a look at SNDRV_PCM_RATE_KNOT? > +#define SUN50I_DMIC_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE) > + > +static struct snd_soc_dai_driver sun50i_dmic_dai = { > + .capture = { > + .channels_min = 1, > + .channels_max = 8, > + .rates = SUN50I_DMIC_RATES, > + .formats = SUN50I_DMIC_FORMATS, > + .sig_bits = 21, > + }, > + .probe = sun50i_dmic_soc_dai_probe, > + .ops = &sun50i_dmic_dai_ops, > + .name = "dmic", > +}; > + ...
On 8/11/22 9:49 AM, Ban Tao wrote: > The Allwinner H6 and later SoCs have an DMIC block > which is capable of capture. > > Signed-off-by: Ban Tao <fengzheng923@gmail.com> First of all, I tested this driver on the Lichee RV 86 Panel (the only board I have with DMIC hardware), and it works great, so: Tested-by: Samuel Holland <samuel@sholland.org> > --- > v1->v2: > 1.Fix some compilation errors. > 2.Modify some code styles. > > v2->v3: > None. > > v3->v4: > 1.add sig_bits. > > v4->v5: > None. > > v5->v6: > 1.Modify RXFIFO_CTL_MODE to mode 1. > > v6->v7: > 1.Modify dmic_rate_s to be a global variable. > 2.Changed some macro names to make more sense. > 3.Align code format. > 4.Add a depends on PM to Kconfig entry. > > v7->v8: > None. > --- > MAINTAINERS | 7 + > sound/soc/sunxi/Kconfig | 8 + > sound/soc/sunxi/Makefile | 1 + > sound/soc/sunxi/sun50i-dmic.c | 405 ++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 421 insertions(+) > create mode 100644 sound/soc/sunxi/sun50i-dmic.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e9d5b05..839f625 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -796,6 +796,13 @@ L: linux-media@vger.kernel.org > S: Maintained > F: drivers/staging/media/sunxi/cedrus/ > > +ALLWINNER DMIC DRIVERS > +M: Ban Tao <fengzheng923@gmail.com> > +L: alsa-devel@alsa-project.org (moderated for non-subscribers) > +S: Maintained > +F: Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml > +F: sound/soc/sunxi/sun50i-dmic.c > + > ALPHA PORT > M: Richard Henderson <rth@twiddle.net> > M: Ivan Kokshaysky <ink@jurassic.park.msu.ru> > diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig > index ddcaaa9..8543234 100644 > --- a/sound/soc/sunxi/Kconfig > +++ b/sound/soc/sunxi/Kconfig > @@ -56,6 +56,14 @@ config SND_SUN4I_SPDIF > Say Y or M to add support for the S/PDIF audio block in the Allwinner > A10 and affiliated SoCs. > > +config SND_SUN50I_DMIC > + tristate "Allwinner H6 DMIC Support" > + depends on (OF && PM && ARCH_SUNXI) || COMPILE_TEST You do not need any of these dependencies. The driver compiles fine with !OF, and runs fine with !PM. The "ARCH_SUNXI || COMPILE_TEST" dependency is already covered by the "menu" line at the top of the file. (In a previous version, Maxime suggested adding a PM dependency and removing the fallback code. Since you kept the fallback code, you do not need the PM dependency.) > + select SND_SOC_GENERIC_DMAENGINE_PCM > + help > + Say Y or M to add support for the DMIC audio block in the Allwinner > + H6 and affiliated SoCs. > + > config SND_SUN8I_ADDA_PR_REGMAP > tristate > select REGMAP > diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile > index a86be34..4483fe9 100644 > --- a/sound/soc/sunxi/Makefile > +++ b/sound/soc/sunxi/Makefile > @@ -6,3 +6,4 @@ obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o > obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o > obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o > obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o > +obj-$(CONFIG_SND_SUN50I_DMIC) += sun50i-dmic.o > diff --git a/sound/soc/sunxi/sun50i-dmic.c b/sound/soc/sunxi/sun50i-dmic.c > new file mode 100644 > index 0000000..76b3378 > --- /dev/null > +++ b/sound/soc/sunxi/sun50i-dmic.c > @@ -0,0 +1,405 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +// > +// This driver supports the DMIC in Allwinner's H6 SoCs. > +// > +// Copyright 2021 Ban Tao <fengzheng923@gmail.com> > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/of_device.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/reset.h> > +#include <sound/dmaengine_pcm.h> > +#include <sound/pcm_params.h> > +#include <sound/soc.h> > + > +#define SUN50I_DMIC_EN_CTL (0x00) > + #define SUN50I_DMIC_EN_CTL_GLOBE BIT(8) > + #define SUN50I_DMIC_EN_CTL_CHAN(v) ((v) << 0) > + #define SUN50I_DMIC_EN_CTL_CHAN_MASK GENMASK(7, 0) > +#define SUN50I_DMIC_SR (0x04) > + #define SUN50I_DMIC_SR_SAMPLE_RATE(v) ((v) << 0) > + #define SUN50I_DMIC_SR_SAMPLE_RATE_MASK GENMASK(2, 0) > +#define SUN50I_DMIC_CTL (0x08) > + #define SUN50I_DMIC_CTL_OVERSAMPLE_RATE BIT(0) > +#define SUN50I_DMIC_DATA (0x10) > +#define SUN50I_DMIC_INTC (0x14) > + #define SUN50I_DMIC_FIFO_DRQ_EN BIT(2) > +#define SUN50I_DMIC_INT_STA (0x18) > + #define SUN50I_DMIC_INT_STA_OVERRUN_IRQ_PENDING BIT(1) > + #define SUN50I_DMIC_INT_STA_DATA_IRQ_PENDING BIT(0) Please consistently use tabs (not spaces) for aligning the macro values. You have a mix here. > +#define SUN50I_DMIC_RXFIFO_CTL (0x1c) > + #define SUN50I_DMIC_RXFIFO_CTL_FLUSH BIT(31) > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MASK BIT(9) > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_LSB (0 << 9) > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MSB (1 << 9) > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK BIT(8) > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16 (0 << 8) > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24 (1 << 8) > +#define SUN50I_DMIC_CH_NUM (0x24) > + #define SUN50I_DMIC_CH_NUM_N(v) ((v) << 0) > + #define SUN50I_DMIC_CH_NUM_N_MASK GENMASK(2, 0) > +#define SUN50I_DMIC_CNT (0x2c) > + #define SUN50I_DMIC_CNT_N BIT(0) This is a count of samples, not a bit mask, so the BIT() macro is misleading here. > +#define SUN50I_DMIC_HPF_CTRL (0x38) > +#define SUN50I_DMIC_VERSION (0x50) > + > +struct sun50i_dmic_dev { > + struct clk *dmic_clk; > + struct clk *bus_clk; > + struct reset_control *rst; > + struct regmap *regmap; > + struct snd_dmaengine_dai_dma_data dma_params_rx; > +}; > + > +struct dmic_rate { > + unsigned int samplerate; > + unsigned int rate_bit; > +}; > + > +static struct dmic_rate dmic_rate_s[] = { Please make this const. > + {48000, 0x0}, > + {44100, 0x0}, > + {32000, 0x1}, > + {24000, 0x2}, > + {22050, 0x2}, > + {16000, 0x3}, > + {12000, 0x4}, > + {11025, 0x4}, > + {8000, 0x5}, > +}; > + > +static int sun50i_dmic_startup(struct snd_pcm_substream *substream, > + struct snd_soc_dai *cpu_dai) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0)); > + > + /* only support capture */ > + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE) > + return -EINVAL; > + > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > + SUN50I_DMIC_RXFIFO_CTL_FLUSH, > + SUN50I_DMIC_RXFIFO_CTL_FLUSH); > + regmap_write(host->regmap, SUN50I_DMIC_CNT, SUN50I_DMIC_CNT_N); > + > + return 0; > +} > + > +static int sun50i_dmic_hw_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params, > + struct snd_soc_dai *cpu_dai) > +{ > + int i = 0; > + unsigned long rate = params_rate(params); > + unsigned int mclk = 0; > + unsigned int channels = params_channels(params); > + unsigned int chan_en = (1 << channels) - 1; > + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(cpu_dai); > + > + /* DMIC num is N+1 */ > + regmap_update_bits(host->regmap, SUN50I_DMIC_CH_NUM, > + SUN50I_DMIC_CH_NUM_N_MASK, > + SUN50I_DMIC_CH_NUM_N(channels - 1)); > + regmap_write(host->regmap, SUN50I_DMIC_HPF_CTRL, chan_en); > + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL, > + SUN50I_DMIC_EN_CTL_CHAN_MASK, > + SUN50I_DMIC_EN_CTL_CHAN(chan_en)); > + > + switch (params_format(params)) { > + case SNDRV_PCM_FORMAT_S16_LE: > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16); > + break; > + case SNDRV_PCM_FORMAT_S24_LE: > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24); > + break; > + default: > + dev_err(cpu_dai->dev, "Invalid format!\n"); > + return -EINVAL; > + } > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > + SUN50I_DMIC_RXFIFO_CTL_MODE_MASK, > + SUN50I_DMIC_RXFIFO_CTL_MODE_MSB); I checked the manuals again, and I may have given you bad information. There appear to be two variants of the DMIC hardware. A63, H6, V5 V100, and V5x6 manuals list Mode 1 as "reserved" for a 24-bit sample resolution. The newer SoCs (A50, A133, D1, H616, and R329) describe Mode 1 as extending the 21-bit sample with three zeros at the LSB to make 24 bits, which is what we want. On my D1 board, recording in S24_LE gives me good audio data, with equivalent loudness to S16_LE, as I would expect. If this also works on older SoCs like H6, then the manual is wrong, and the driver is fine. However, if recording in S24_LE does not work on H6, then we will need to limit the driver to only S16_LE on H6. We could enable S24_LE on later SoCs with a separate compatible string. Please, can you test S24_LE on one of the older SoCs? (or let me know how it works if you have already tested it) The rest of the driver looks good to me. Regards, Samuel
On 8/23/22 10:08 AM, 班涛 wrote: > Samuel Holland <samuel@sholland.org> 于2022年8月20 日周六 14:57写道： > On 8/11/22 9:49 AM, Ban Tao wrote: > > + switch (params_format(params)) { > > + case SNDRV_PCM_FORMAT_S16_LE: > > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, > > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16); > > + break; > > + case SNDRV_PCM_FORMAT_S24_LE: > > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, > > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24); > > + break; > > + default: > > + dev_err(cpu_dai->dev, "Invalid format!\n"); > > + return -EINVAL; > > + } > > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, > > + SUN50I_DMIC_RXFIFO_CTL_MODE_MASK, > > + SUN50I_DMIC_RXFIFO_CTL_MODE_MSB); > > I checked the manuals again, and I may have given you bad information. There > appear to be two variants of the DMIC hardware. > > A63, H6, V5 V100, and V5x6 manuals list Mode 1 as "reserved" for a 24-bit sample > resolution. The newer SoCs (A50, A133, D1, H616, and R329) describe Mode 1 as > extending the 21-bit sample with three zeros at the LSB to make 24 bits, which > is what we want. > > On my D1 board, recording in S24_LE gives me good audio data, with equivalent > loudness to S16_LE, as I would expect. If this also works on older SoCs like H6, > then the manual is wrong, and the driver is fine. > > > I checked the H6 manual, DMIC also supports 24bits. The H6 SoC works fine in > mode 1. I don't know where your manual came from, mine is provided by SUNXI. I am referencing the manual linked from the linux-sunxi wiki, section 7.4.5.7: https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf For 24-bit received audio sample: Mode 0: RXDATA[31:0] = {FIFO_O[23:0], 8'h0} Mode 1: Reserved Since the manual is wrong, could you please add a comment? Something like "The hardware supports FIFO mode 1 for 24-bit samples, even though the H6 manual describes that combination as reserved." Regards, Samuel
diff --git a/MAINTAINERS b/MAINTAINERS index e9d5b05..839f625 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -796,6 +796,13 @@ L: linux-media@vger.kernel.org S: Maintained F: drivers/staging/media/sunxi/cedrus/ +ALLWINNER DMIC DRIVERS +M: Ban Tao <fengzheng923@gmail.com> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml +F: sound/soc/sunxi/sun50i-dmic.c + ALPHA PORT M: Richard Henderson <rth@twiddle.net> M: Ivan Kokshaysky <ink@jurassic.park.msu.ru> diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig index ddcaaa9..8543234 100644 --- a/sound/soc/sunxi/Kconfig +++ b/sound/soc/sunxi/Kconfig @@ -56,6 +56,14 @@ config SND_SUN4I_SPDIF Say Y or M to add support for the S/PDIF audio block in the Allwinner A10 and affiliated SoCs. +config SND_SUN50I_DMIC + tristate "Allwinner H6 DMIC Support" + depends on (OF && PM && ARCH_SUNXI) || COMPILE_TEST + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M to add support for the DMIC audio block in the Allwinner + H6 and affiliated SoCs. + config SND_SUN8I_ADDA_PR_REGMAP tristate select REGMAP diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile index a86be34..4483fe9 100644 --- a/sound/soc/sunxi/Makefile +++ b/sound/soc/sunxi/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o +obj-$(CONFIG_SND_SUN50I_DMIC) += sun50i-dmic.o diff --git a/sound/soc/sunxi/sun50i-dmic.c b/sound/soc/sunxi/sun50i-dmic.c new file mode 100644 index 0000000..76b3378 --- /dev/null +++ b/sound/soc/sunxi/sun50i-dmic.c @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// This driver supports the DMIC in Allwinner's H6 SoCs. +// +// Copyright 2021 Ban Tao <fengzheng923@gmail.com> + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/of_device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <sound/dmaengine_pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#define SUN50I_DMIC_EN_CTL (0x00) + #define SUN50I_DMIC_EN_CTL_GLOBE BIT(8) + #define SUN50I_DMIC_EN_CTL_CHAN(v) ((v) << 0) + #define SUN50I_DMIC_EN_CTL_CHAN_MASK GENMASK(7, 0) +#define SUN50I_DMIC_SR (0x04) + #define SUN50I_DMIC_SR_SAMPLE_RATE(v) ((v) << 0) + #define SUN50I_DMIC_SR_SAMPLE_RATE_MASK GENMASK(2, 0) +#define SUN50I_DMIC_CTL (0x08) + #define SUN50I_DMIC_CTL_OVERSAMPLE_RATE BIT(0) +#define SUN50I_DMIC_DATA (0x10) +#define SUN50I_DMIC_INTC (0x14) + #define SUN50I_DMIC_FIFO_DRQ_EN BIT(2) +#define SUN50I_DMIC_INT_STA (0x18) + #define SUN50I_DMIC_INT_STA_OVERRUN_IRQ_PENDING BIT(1) + #define SUN50I_DMIC_INT_STA_DATA_IRQ_PENDING BIT(0) +#define SUN50I_DMIC_RXFIFO_CTL (0x1c) + #define SUN50I_DMIC_RXFIFO_CTL_FLUSH BIT(31) + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MASK BIT(9) + #define SUN50I_DMIC_RXFIFO_CTL_MODE_LSB (0 << 9) + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MSB (1 << 9) + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK BIT(8) + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16 (0 << 8) + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24 (1 << 8) +#define SUN50I_DMIC_CH_NUM (0x24) + #define SUN50I_DMIC_CH_NUM_N(v) ((v) << 0) + #define SUN50I_DMIC_CH_NUM_N_MASK GENMASK(2, 0) +#define SUN50I_DMIC_CNT (0x2c) + #define SUN50I_DMIC_CNT_N BIT(0) +#define SUN50I_DMIC_HPF_CTRL (0x38) +#define SUN50I_DMIC_VERSION (0x50) + +struct sun50i_dmic_dev { + struct clk *dmic_clk; + struct clk *bus_clk; + struct reset_control *rst; + struct regmap *regmap; + struct snd_dmaengine_dai_dma_data dma_params_rx; +}; + +struct dmic_rate { + unsigned int samplerate; + unsigned int rate_bit; +}; + +static struct dmic_rate dmic_rate_s[] = { + {48000, 0x0}, + {44100, 0x0}, + {32000, 0x1}, + {24000, 0x2}, + {22050, 0x2}, + {16000, 0x3}, + {12000, 0x4}, + {11025, 0x4}, + {8000, 0x5}, +}; + +static int sun50i_dmic_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0)); + + /* only support capture */ + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE) + return -EINVAL; + + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, + SUN50I_DMIC_RXFIFO_CTL_FLUSH, + SUN50I_DMIC_RXFIFO_CTL_FLUSH); + regmap_write(host->regmap, SUN50I_DMIC_CNT, SUN50I_DMIC_CNT_N); + + return 0; +} + +static int sun50i_dmic_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + int i = 0; + unsigned long rate = params_rate(params); + unsigned int mclk = 0; + unsigned int channels = params_channels(params); + unsigned int chan_en = (1 << channels) - 1; + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(cpu_dai); + + /* DMIC num is N+1 */ + regmap_update_bits(host->regmap, SUN50I_DMIC_CH_NUM, + SUN50I_DMIC_CH_NUM_N_MASK, + SUN50I_DMIC_CH_NUM_N(channels - 1)); + regmap_write(host->regmap, SUN50I_DMIC_HPF_CTRL, chan_en); + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL, + SUN50I_DMIC_EN_CTL_CHAN_MASK, + SUN50I_DMIC_EN_CTL_CHAN(chan_en)); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16); + break; + case SNDRV_PCM_FORMAT_S24_LE: + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK, + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24); + break; + default: + dev_err(cpu_dai->dev, "Invalid format!\n"); + return -EINVAL; + } + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL, + SUN50I_DMIC_RXFIFO_CTL_MODE_MASK, + SUN50I_DMIC_RXFIFO_CTL_MODE_MSB); + + switch (rate) { + case 11025: + case 22050: + case 44100: + mclk = 22579200; + break; + case 8000: + case 12000: + case 16000: + case 24000: + case 32000: + case 48000: + mclk = 24576000; + break; + default: + dev_err(cpu_dai->dev, "Invalid rate!\n"); + return -EINVAL; + } + + if (clk_set_rate(host->dmic_clk, mclk)) { + dev_err(cpu_dai->dev, "mclk : %u not support\n", mclk); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(dmic_rate_s); i++) { + if (dmic_rate_s[i].samplerate == rate) { + regmap_update_bits(host->regmap, SUN50I_DMIC_SR, + SUN50I_DMIC_SR_SAMPLE_RATE_MASK, + SUN50I_DMIC_SR_SAMPLE_RATE(dmic_rate_s[i].rate_bit)); + break; + } + } + + switch (params_physical_width(params)) { + case 16: + host->dma_params_rx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case 32: + host->dma_params_rx.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + default: + dev_err(cpu_dai->dev, "Unsupported physical sample width: %d\n", + params_physical_width(params)); + return -EINVAL; + } + + /* oversamplerate adjust */ + if (params_rate(params) >= 24000) + regmap_update_bits(host->regmap, SUN50I_DMIC_CTL, + SUN50I_DMIC_CTL_OVERSAMPLE_RATE, + SUN50I_DMIC_CTL_OVERSAMPLE_RATE); + else + regmap_update_bits(host->regmap, SUN50I_DMIC_CTL, + SUN50I_DMIC_CTL_OVERSAMPLE_RATE, 0); + + return 0; +} + +static int sun50i_dmic_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + int ret = 0; + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(dai); + + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE) + return -EINVAL; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + /* DRQ ENABLE */ + regmap_update_bits(host->regmap, SUN50I_DMIC_INTC, + SUN50I_DMIC_FIFO_DRQ_EN, + SUN50I_DMIC_FIFO_DRQ_EN); + /* Global enable */ + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL, + SUN50I_DMIC_EN_CTL_GLOBE, + SUN50I_DMIC_EN_CTL_GLOBE); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + /* DRQ DISABLE */ + regmap_update_bits(host->regmap, SUN50I_DMIC_INTC, + SUN50I_DMIC_FIFO_DRQ_EN, 0); + /* Global disable */ + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL, + SUN50I_DMIC_EN_CTL_GLOBE, 0); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int sun50i_dmic_soc_dai_probe(struct snd_soc_dai *dai) +{ + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_init_dma_data(dai, NULL, &host->dma_params_rx); + + return 0; +} + +static const struct snd_soc_dai_ops sun50i_dmic_dai_ops = { + .startup = sun50i_dmic_startup, + .trigger = sun50i_dmic_trigger, + .hw_params = sun50i_dmic_hw_params, +}; + +static const struct regmap_config sun50i_dmic_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = SUN50I_DMIC_VERSION, + .cache_type = REGCACHE_NONE, +}; + +#define SUN50I_DMIC_RATES (SNDRV_PCM_RATE_8000_48000) +#define SUN50I_DMIC_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver sun50i_dmic_dai = { + .capture = { + .channels_min = 1, + .channels_max = 8, + .rates = SUN50I_DMIC_RATES, + .formats = SUN50I_DMIC_FORMATS, + .sig_bits = 21, + }, + .probe = sun50i_dmic_soc_dai_probe, + .ops = &sun50i_dmic_dai_ops, + .name = "dmic", +}; + +static const struct of_device_id sun50i_dmic_of_match[] = { + { + .compatible = "allwinner,sun50i-h6-dmic", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun50i_dmic_of_match); + +static const struct snd_soc_component_driver sun50i_dmic_component = { + .name = "sun50i-dmic", +}; + +static int sun50i_dmic_runtime_suspend(struct device *dev) +{ + struct sun50i_dmic_dev *host = dev_get_drvdata(dev); + + clk_disable_unprepare(host->dmic_clk); + clk_disable_unprepare(host->bus_clk); + + return 0; +} + +static int sun50i_dmic_runtime_resume(struct device *dev) +{ + struct sun50i_dmic_dev *host = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(host->dmic_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(host->bus_clk); + if (ret) { + clk_disable_unprepare(host->dmic_clk); + return ret; + } + + return 0; +} + +static int sun50i_dmic_probe(struct platform_device *pdev) +{ + struct sun50i_dmic_dev *host; + struct resource *res; + int ret; + void __iomem *base; + + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); + if (!host) + return -ENOMEM; + + /* Get the addresses */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return dev_err_probe(&pdev->dev, PTR_ERR(base), + "get resource failed.\n"); + + host->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &sun50i_dmic_regmap_config); + + /* Clocks */ + host->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(host->bus_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(host->bus_clk), + "failed to get bus clock.\n"); + + host->dmic_clk = devm_clk_get(&pdev->dev, "mod"); + if (IS_ERR(host->dmic_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(host->dmic_clk), + "failed to get dmic clock.\n"); + + host->dma_params_rx.addr = res->start + SUN50I_DMIC_DATA; + host->dma_params_rx.maxburst = 8; + + platform_set_drvdata(pdev, host); + + host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); + if (IS_ERR(host->rst)) + return dev_err_probe(&pdev->dev, PTR_ERR(host->rst), + "Failed to get reset.\n"); + reset_control_deassert(host->rst); + + ret = devm_snd_soc_register_component(&pdev->dev, &sun50i_dmic_component, + &sun50i_dmic_dai, 1); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register component.\n"); + + pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + ret = sun50i_dmic_runtime_resume(&pdev->dev); + if (ret) + goto err_disable_runtime_pm; + } + + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + if (ret) + goto err_suspend; + + return 0; +err_suspend: + if (!pm_runtime_status_suspended(&pdev->dev)) + sun50i_dmic_runtime_suspend(&pdev->dev); +err_disable_runtime_pm: + pm_runtime_disable(&pdev->dev); + return ret; +} + +static int sun50i_dmic_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + if (!pm_runtime_status_suspended(&pdev->dev)) + sun50i_dmic_runtime_suspend(&pdev->dev); + + return 0; +} + +static const struct dev_pm_ops sun50i_dmic_pm = { + SET_RUNTIME_PM_OPS(sun50i_dmic_runtime_suspend, + sun50i_dmic_runtime_resume, NULL) +}; + +static struct platform_driver sun50i_dmic_driver = { + .driver = { + .name = "sun50i-dmic", + .of_match_table = of_match_ptr(sun50i_dmic_of_match), + .pm = &sun50i_dmic_pm, + }, + .probe = sun50i_dmic_probe, + .remove = sun50i_dmic_remove, +}; + +module_platform_driver(sun50i_dmic_driver); + +MODULE_DESCRIPTION("Allwinner sun50i DMIC SoC Interface"); +MODULE_AUTHOR("Ban Tao <fengzheng923@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sun50i-dmic");
The Allwinner H6 and later SoCs have an DMIC block which is capable of capture. Signed-off-by: Ban Tao <fengzheng923@gmail.com> --- v1->v2: 1.Fix some compilation errors. 2.Modify some code styles. v2->v3: None. v3->v4: 1.add sig_bits. v4->v5: None. v5->v6: 1.Modify RXFIFO_CTL_MODE to mode 1. v6->v7: 1.Modify dmic_rate_s to be a global variable. 2.Changed some macro names to make more sense. 3.Align code format. 4.Add a depends on PM to Kconfig entry. v7->v8: None. --- MAINTAINERS | 7 + sound/soc/sunxi/Kconfig | 8 + sound/soc/sunxi/Makefile | 1 + sound/soc/sunxi/sun50i-dmic.c | 405 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 421 insertions(+) create mode 100644 sound/soc/sunxi/sun50i-dmic.c