[v5.1,9/7] watchdog: s3c2410: add restart handler

Commit Message

Heiko Stuebner Aug. 2, 2014, 7:51 p.m. UTC

On a lot of Samsung systems the watchdog is responsible for restarting the
system and until now this code was contained in plat-samsung/watchdog-reset.c .

With the introduction of the restart handlers, this code can now move into
driver itself, removing the need for arch-specific code.

Tested on a S3C2442 based GTA02
Signed-off-by: Heiko Stuebner <[e-mail]>
[Guenter Roeck: Update to latest API; do not require static context variable]
Signed-off-by: Guenter Roeck <[e-mail]>
Acked-by: Heiko Stuebner <[e-mail]>
---
changes since v5:
- reintroduce the mdelay(500) from the platform code, to make sure the
  watchdog has time to assert, as suggested by Tomasz Figa

 drivers/watchdog/s3c2410_wdt.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

Patch

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 7c6ccd0..2955aef 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -41,6 +41,8 @@ 
 #include <linux/of.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
 
 #define S3C2410_WTCON		0x00
 #define S3C2410_WTDAT		0x04
@@ -128,6 +130,7 @@  struct s3c2410_wdt {
 	unsigned long		wtdat_save;
 	struct watchdog_device	wdt_device;
 	struct notifier_block	freq_transition;
+	struct notifier_block	restart_handler;
 	struct s3c2410_wdt_variant *drv_data;
 	struct regmap *pmureg;
 };
@@ -438,6 +441,31 @@  static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 }
 #endif
 
+static int s3c2410wdt_restart(struct notifier_block *this,
+			      unsigned long mode, void *cmd)
+{
+	struct s3c2410_wdt *wdt = container_of(this, struct s3c2410_wdt,
+					       restart_handler);
+	void __iomem *wdt_base = wdt->reg_base;
+
+	/* disable watchdog, to be safe  */
+	writel(0, wdt_base + S3C2410_WTCON);
+
+	/* put initial values into count and data */
+	writel(0x80, wdt_base + S3C2410_WTCNT);
+	writel(0x80, wdt_base + S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
+		S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
+		wdt_base + S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return NOTIFY_DONE;
+}
+
 static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
 {
 	unsigned int rst_stat;
@@ -592,6 +620,12 @@  static int s3c2410wdt_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, wdt);
 
+	wdt->restart_handler.notifier_call = s3c2410wdt_restart;
+	wdt->restart_handler.priority = 128;
+	ret = register_restart_handler(&wdt->restart_handler);
+	if (ret)
+		pr_err("cannot register restart handler, %d\n", ret);
+
 	/* print out a statement of readiness */
 
 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
@@ -621,6 +655,8 @@  static int s3c2410wdt_remove(struct platform_device *dev)
 	int ret;
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 
+	unregister_restart_handler(&wdt->restart_handler);
+
 	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
 	if (ret < 0)
 		return ret;