===================================================================
@@ -0,0 +1,22 @@
+BCM476x System Timer
+
+The System Timer peripheral provides either two or four 32-bit timer
+channels. BCM476x has three timers at 0xba000, 0xbb000 and 0xd1000. The
+first two provide four channels, the last (in the AON - Always ON power
+domain) provides only two.
+
+Required properties:
+
+- compatible : should be "brcm,bcm476x-system-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 2 or 4 interrupt sinks; one per timer channel.
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+ compatible = "brcm,bcm476x-system-timer";
+ reg = <0xba000 0x1000>;
+ interrupts = <4>, <11>;
+ clock-frequency = <24000000>;
+};
===================================================================
@@ -14,6 +14,14 @@
#size-cells = <1>;
ranges;
+ timer {
+ compatible = "brcm,bcm476x-system-timer";
+ reg = <0xba000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <4>, <11>;
+ clock-frequency = <24000000>;
+ };
+
vic0: interrupt-controller@80000 {
compatible = "brcm,bcm476x-pl192", "arm,pl192-vic", "arm,primecell";
reg = <0x80000 0x1000>;
===================================================================
@@ -17,11 +17,11 @@
#include <linux/init.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/bcm476x_timer.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#define BCM476X_PERIPH_PHYS 0x00080000
#define BCM476X_PERIPH_VIRT 0xd0080000
@@ -60,14 +60,6 @@ static void __init bcm476x_init_irq(void
of_irq_init(vic_of_match);
}
-static void __init bcm476x_timer_init(void)
-{
-}
-
-struct sys_timer bcm476x_timer = {
- .init = bcm476x_timer_init
-};
-
static const char * const bcm476x_compat[] = {
"brcm,bcm476x",
NULL
===================================================================
@@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
+obj-$(CONFIG_ARCH_BCM476X) += bcm476x_timer.o
obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o
===================================================================
@@ -0,0 +1,188 @@
+/*
+ * Broadcom BCM476x SoCs system timer
+ *
+ * Copyright (C) 2012 Domenico Andreoli <domenico.andreoli@linux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bcm476x_timer.h>
+#include <linux/bitops.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/sched_clock.h>
+#include <asm/irq.h>
+
+#define TIMER_LOAD_OFFSET 0x00 /* load */
+#define TIMER_VALUE_OFFSET 0x04 /* value */
+#define TIMER_CONTROL_OFFSET 0x08 /* control */
+#define TIMER_INTCLR_OFFSET 0x0c /* interrupt clear */
+#define TIMER_RIS_OFFSET 0x10 /* raw interrupt */
+#define TIMER_MIS_OFFSET 0x14 /* masked interrupt status */
+#define TIMER_BGLOAD_OFFSET 0x18 /* background load */
+
+#define TIMER_CTRL_ONESHOTMODE BIT(0) /* One shot mode */
+#define TIMER_CTRL_32BIT BIT(1) /* 32-bit counter mode */
+#define TIMER_CTRL_IE BIT(5) /* Interrupt enable */
+#define TIMER_CTRL_PERIODIC BIT(6) /* Periodic mode */
+#define TIMER_CTRL_EN BIT(7) /* Timer enable */
+#define TIMER_CTRL_CLK2 BIT(9) /* Clock 2 selected */
+#define TIMER_CTRL_PREBY16 (1 << 2) /* prescale divide by 16 */
+#define TIMER_CTRL_PREBY256 (2 << 2) /* prescale divide by 256 */
+
+struct bcm476x_timer {
+ void __iomem *base;
+ struct clock_event_device evt;
+ struct irqaction act;
+};
+
+static inline void __iomem *to_load(struct bcm476x_timer *timer)
+{
+ return timer->base + TIMER_LOAD_OFFSET;
+}
+
+static inline void __iomem *to_control(struct bcm476x_timer *timer)
+{
+ return timer->base + TIMER_CONTROL_OFFSET;
+}
+
+static inline void __iomem *to_intclr(struct bcm476x_timer *timer)
+{
+ return timer->base + TIMER_INTCLR_OFFSET;
+}
+
+static inline void __iomem *to_ris(struct bcm476x_timer *timer)
+{
+ return timer->base + TIMER_RIS_OFFSET;
+}
+
+static inline void __iomem *to_mis(struct bcm476x_timer *timer)
+{
+ return timer->base + TIMER_MIS_OFFSET;
+}
+
+static void bcm476x_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt_dev)
+{
+ struct bcm476x_timer *timer;
+ u32 val;
+
+ timer = container_of(evt_dev, struct bcm476x_timer, evt);
+ val = TIMER_CTRL_CLK2 | TIMER_CTRL_32BIT |
+ TIMER_CTRL_IE | TIMER_CTRL_EN;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(val | TIMER_CTRL_ONESHOTMODE, to_control(timer));
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ default:
+ WARN(1, "%s: unhandled event mode %d\n", __func__, mode);
+ break;
+ }
+}
+
+static int bcm476x_timer_set_next_event(unsigned long event,
+ struct clock_event_device *evt_dev)
+{
+ struct bcm476x_timer *timer;
+
+ timer = container_of(evt_dev, struct bcm476x_timer, evt);
+ writel(event, to_load(timer));
+ return 0;
+}
+
+static irqreturn_t bcm476x_timer_interrupt(int irq, void *dev_id)
+{
+ struct bcm476x_timer *timer = dev_id;
+ void (*event_handler)(struct clock_event_device *);
+
+ /* check the (masked) interrupt status */
+ if (!readl_relaxed(to_mis(timer)))
+ return IRQ_NONE;
+
+ /* clear the timer interrupt */
+ writel_relaxed(1, to_intclr(timer));
+
+ event_handler = ACCESS_ONCE(timer->evt.event_handler);
+ if (event_handler)
+ event_handler(&timer->evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct of_device_id bcm476x_timer_match[] __initconst = {
+ { .compatible = "brcm,bcm476x-system-timer" },
+ {}
+};
+
+static void __init bcm476x_timer_init(void)
+{
+ struct device_node *node;
+ void __iomem *base;
+ u32 freq;
+ int irq;
+ struct bcm476x_timer *timer;
+
+ node = of_find_matching_node(NULL, bcm476x_timer_match);
+ if (!node)
+ panic("No bcm476x timer node");
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("Can't remap timer registers");
+
+ if (of_property_read_u32(node, "clock-frequency", &freq))
+ panic("Can't read timer frequency");
+ if (freq != 32000 && freq != 24000000)
+ panic("Invalid timer frequency");
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ panic("Can't allocate timer struct\n");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse timer IRQ");
+
+ timer->base = base;
+ timer->evt.name = node->name;
+ timer->evt.rating = 300;
+ timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->evt.set_mode = bcm476x_timer_set_mode;
+ timer->evt.set_next_event = bcm476x_timer_set_next_event;
+ timer->evt.cpumask = cpumask_of(0);
+ timer->act.name = node->name;
+ timer->act.flags = IRQF_TIMER | IRQF_SHARED;
+ timer->act.dev_id = timer;
+ timer->act.handler = bcm476x_timer_interrupt;
+
+ if (setup_irq(irq, &timer->act))
+ panic("Can't set up timer IRQ\n");
+
+ clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
+}
+
+struct sys_timer bcm476x_timer = {
+ .init = bcm476x_timer_init,
+};
===================================================================
@@ -0,0 +1,24 @@
+/*
+ * Broadcom BCM476x SoCs system timer
+ *
+ * Copyright (C) 2012 Domenico Andreoli <domenico.andreoli@linux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BCM476X_TIMER_H
+#define __BCM476X_TIMER_H
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer bcm476x_timer;
+
+#endif