| Message ID | 20121008135442.GS11149@beef (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/8/2012 7:24 PM, Matt Porter wrote: > Registers the uio_pruss platform device on the DA850 EVM. > > Tested on AM180x-EVM using the PRU_memAccessPRUDataRam and > PRU_memAccessL3andDDR examples from the PRU userspace tools > available from http://www.ti.com/tool/sprc940 > > Signed-off-by: Matt Porter <mporter@ti.com> > --- > arch/arm/mach-davinci/board-da850-evm.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c > index 7359375..9e7f954 100644 > --- a/arch/arm/mach-davinci/board-da850-evm.c > +++ b/arch/arm/mach-davinci/board-da850-evm.c > @@ -31,6 +31,7 @@ > #include <linux/platform_data/mtd-davinci.h> > #include <linux/platform_data/mtd-davinci-aemif.h> > #include <linux/platform_data/spi-davinci.h> > +#include <linux/platform_data/uio_pruss.h> > #include <linux/regulator/machine.h> > #include <linux/regulator/tps6507x.h> > #include <linux/spi/spi.h> > @@ -1339,6 +1340,11 @@ static __init void da850_evm_init(void) > pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", > ret); > > + ret = da8xx_register_uio_pruss(); > + if (ret) > + pr_warning("da850_evm_init: pruss initialization failed: %d\n", So this gave a checkpatch warning asking you to use pr_warn() instead. I fixed this locally. Thanks, Sekhar
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 7359375..9e7f954 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -31,6 +31,7 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> #include <linux/spi/spi.h> @@ -1339,6 +1340,11 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + ret = da8xx_register_uio_pruss(); + if (ret) + pr_warning("da850_evm_init: pruss initialization failed: %d\n", + ret); + /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret)
Registers the uio_pruss platform device on the DA850 EVM. Tested on AM180x-EVM using the PRU_memAccessPRUDataRam and PRU_memAccessL3andDDR examples from the PRU userspace tools available from http://www.ti.com/tool/sprc940 Signed-off-by: Matt Porter <mporter@ti.com> --- arch/arm/mach-davinci/board-da850-evm.c | 6 ++++++ 1 file changed, 6 insertions(+)