Message ID | 20121121174225.25576.54891.stgit@muffinssi.local (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, 21 Nov 2012 09:42:25 -0800 Tony Lindgren <tony@atomide.com> wrote: > We cannot include any plat or mach headers for the multiplatform > support. > > Fix the issue by defining local mcbsp_omap1(). > > cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > cc: Jarkko Nikula <jarkko.nikula@bitmer.com> > cc: Liam Girdwood <lrg@ti.com> > cc: Mark Brown <broonie@opensource.wolfsonmicro.com> > cc: Jaroslav Kysela <perex@perex.cz> > cc: Takashi Iwai <tiwai@suse.de> > cc: alsa-devel@alsa-project.org > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > sound/soc/omap/mcbsp.c | 4 +--- > sound/soc/omap/mcbsp.h | 6 ++++++ > sound/soc/omap/omap-mcbsp.c | 5 ++--- > 3 files changed, 9 insertions(+), 6 deletions(-) > Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
On 11/21/2012 06:42 PM, Tony Lindgren wrote: > We cannot include any plat or mach headers for the multiplatform > support. > > Fix the issue by defining local mcbsp_omap1(). > > cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > cc: Jarkko Nikula <jarkko.nikula@bitmer.com> > cc: Liam Girdwood <lrg@ti.com> > cc: Mark Brown <broonie@opensource.wolfsonmicro.com> > cc: Jaroslav Kysela <perex@perex.cz> > cc: Takashi Iwai <tiwai@suse.de> > cc: alsa-devel@alsa-project.org > Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index afb8d4f..a9a2438 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -28,8 +28,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/cpu.h> - #include "mcbsp.h" static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) @@ -612,7 +610,7 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp) * system will refuse to enter idle if the CLKS pin source is not reset * back to internal source. */ - if (!cpu_class_is_omap1()) + if (!mcbsp_omap1()) omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC); spin_lock(&mcbsp->lock); diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h index 49a6725..a89791c 100644 --- a/sound/soc/omap/mcbsp.h +++ b/sound/soc/omap/mcbsp.h @@ -26,6 +26,12 @@ #include "omap-pcm.h" +#ifdef CONFIG_ARCH_OMAP1 +#define mcbsp_omap1() 1 +#else +#define mcbsp_omap1() 0 +#endif + /* McBSP register numbers. Register address offset = num * reg_step */ enum { /* Common registers */ diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index a6ee157..0916760 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -34,7 +34,6 @@ #include <sound/initval.h> #include <sound/soc.h> -#include <plat/cpu.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include "mcbsp.h" #include "omap-mcbsp.h" @@ -512,7 +511,7 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, regs->srgr2 |= CLKSM; break; case OMAP_MCBSP_SYSCLK_CLKS_FCLK: - if (cpu_class_is_omap1()) { + if (mcbsp_omap1()) { err = -EINVAL; break; } @@ -520,7 +519,7 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, MCBSP_CLKS_PRCM_SRC); break; case OMAP_MCBSP_SYSCLK_CLKS_EXT: - if (cpu_class_is_omap1()) { + if (mcbsp_omap1()) { err = 0; break; }
We cannot include any plat or mach headers for the multiplatform support. Fix the issue by defining local mcbsp_omap1(). cc: Peter Ujfalusi <peter.ujfalusi@ti.com> cc: Jarkko Nikula <jarkko.nikula@bitmer.com> cc: Liam Girdwood <lrg@ti.com> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> cc: Jaroslav Kysela <perex@perex.cz> cc: Takashi Iwai <tiwai@suse.de> cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com> --- sound/soc/omap/mcbsp.c | 4 +--- sound/soc/omap/mcbsp.h | 6 ++++++ sound/soc/omap/omap-mcbsp.c | 5 ++--- 3 files changed, 9 insertions(+), 6 deletions(-)