@@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.
# SMP objects
smp-y := platsmp.o headsmp.o
smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o
+smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o
@@ -0,0 +1,50 @@
+/*
+ * Shared SCU setup for mach-shmobile
+ *
+ * Copyright (C) 2012 Bastian Hecht
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+ __CPUINIT
+/*
+ * Reset vector for secondary CPUs.
+ *
+ * First we turn on L1 cache coherency for our CPU. Then we jump to
+ * shmobile_invalidate_start that invalidates the cache and hands over control
+ * to the common ARM startup code.
+ * This function will be mapped to address 0 by the SBAR register.
+ * A normal branch is out of range here so we need a long jump. We jump to
+ * the physical address as the MMU is still turned off.
+ */
+ .align 12
+ENTRY(shmobile_secondary_vector_scu)
+ mrc p15, 0, r0, c0, c0, 5 @ read MIPDR
+ and r0, r0, #3 @ mask out cpu ID
+ lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
+ mov r1, #0xf0000000 @ SCU base address
+ ldr r2, [r1, #8] @ SCU Power Status Register
+ mov r3, #3
+ bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
+ str r2, [r1, #8] @ write back
+
+ ldr pc, 1f
+1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector_scu)
@@ -1,50 +0,0 @@
-/*
- * SMP support for SoC sh73a0
- *
- * Copyright (C) 2012 Bastian Hecht
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-
- __CPUINIT
-/*
- * Reset vector for secondary CPUs.
- *
- * First we turn on L1 cache coherency for our CPU. Then we jump to
- * shmobile_invalidate_start that invalidates the cache and hands over control
- * to the common ARM startup code.
- * This function will be mapped to address 0 by the SBAR register.
- * A normal branch is out of range here so we need a long jump. We jump to
- * the physical address as the MMU is still turned off.
- */
- .align 12
-ENTRY(sh73a0_secondary_vector)
- mrc p15, 0, r0, c0, c0, 5 @ read MIPDR
- and r0, r0, #3 @ mask out cpu ID
- lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
- mov r1, #0xf0000000 @ SCU base address
- ldr r2, [r1, #8] @ SCU Power Status Register
- mov r3, #3
- bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
- str r2, [r1, #8] @ write back
-
- ldr pc, 1f
-1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(sh73a0_secondary_vector)
@@ -8,6 +8,7 @@ extern void shmobile_setup_delay(unsigne
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
+extern void shmobile_secondary_vector_scu(void);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -45,7 +46,6 @@ extern void sh73a0_add_standard_devices_
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
-extern void sh73a0_secondary_vector(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
@@ -80,9 +80,9 @@ static void __init sh73a0_smp_prepare_cp
{
scu_enable(scu_base_addr());
- /* Map the reset vector (in headsmp-sh73a0.S) */
+ /* Map the reset vector (in headsmp-scu.S) */
__raw_writel(0, APARMBAREA); /* 4k */
- __raw_writel(__pa(sh73a0_secondary_vector), SBAR);
+ __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
/* enable cache coherency on booting CPU */
scu_power_mode(scu_base_addr(), SCU_PM_NORMAL);