[v2,1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

Commit Message

Heiko Stuebner March 21, 2013, 2:09 p.m. UTC

The register definitions are only used in the driver itself.
This also removes the last dependency on plat/ includes from the
i2c driver.

Signed-off-by: Heiko Stuebner <[e-mail]>
Acked-by: Kukjin Kim <[e-mail]>
---
changes since v1: rebased against 3.9-rc3

 arch/arm/mach-s3c24xx/mach-rx1950.c           |    1 -
 arch/arm/plat-samsung/devs.c                  |    1 -
 arch/arm/plat-samsung/include/plat/regs-iic.h |   56 -------------------------
 drivers/i2c/busses/i2c-s3c2410.c              |   41 ++++++++++++++++++-
 4 files changed, 40 insertions(+), 59 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/include/plat/regs-iic.h

Comments

Wolfram Sang March 22, 2013, 10:24 p.m. UTC | #1

On Thu, Mar 21, 2013 at 03:09:25PM +0100, Heiko Stübner wrote:
> The register definitions are only used in the driver itself.
> This also removes the last dependency on plat/ includes from the
> i2c driver.
> 
> Signed-off-by: Heiko Stuebner <[e-mail]>
> Acked-by: Kukjin Kim <[e-mail]>

Both applied to for-next, thanks!

Patch

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1f9ba2a..43f3ac5 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -56,7 +56,6 @@ 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 51afedd..76209c9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -62,7 +62,6 @@ 
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17d..0000000
--- a/arch/arm/plat-samsung/include/plat/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@ 
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <[e-mail]>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f6b880b..216fea1 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -42,9 +42,48 @@ 
 
 #include <asm/irq.h>
 
-#include <plat/regs-iic.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN		(1<<7)
+#define S3C2410_IICCON_TXDIV_16		(0<<6)
+#define S3C2410_IICCON_TXDIV_512	(1<<6)
+#define S3C2410_IICCON_IRQEN		(1<<5)
+#define S3C2410_IICCON_IRQPEND		(1<<4)
+#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
+#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
+#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+
+#define S3C2410_IICSTAT_START		(1<<5)
+#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
+#define S3C2410_IICSTAT_TXRXEN		(1<<4)
+#define S3C2410_IICSTAT_ARBITR		(1<<3)
+#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
+#define S3C2410_IICSTAT_ADDR0		(1<<1)
+#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1<<2)
+
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
 #define QUIRK_S3C2440		(1 << 0)
 #define QUIRK_HDMIPHY		(1 << 1)