diff mbox

[V2] ARM: i.MX5: Allow DT clock providers

Message ID 20130415080741.20173.70704.stgit@localhost (mailing list archive)
State New, archived
Headers show

Commit Message

Martin Fuzzey April 15, 2013, 8:07 a.m. UTC
Currently clock providers defined in the DT are not registered
on i.MX5 platforms since of_clk_init() is not called.

This is not a problem for the SOC's own clocks, which are registered
in code,  but prevents the DT being used to define clocks for external
hardware.

Fix this by calling of_clk_init() and actually using the DT to obtain
the 4 SOC fixed clocks.
These are already defined in the DT but were previously just used to
manually obtain the rate.

Fall back to the old scheme for non DT platforms.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>

---
Changelog:
V2: Applied comments from Sashca Hauer:
	* Use kasprintf instead of scnprintf to avoid length limit
	* Avoid use of IS_ERR_OR_NULL
---
 arch/arm/mach-imx/clk-imx51-imx53.c |   79 ++++++++++++++++++++---------------
 1 files changed, 45 insertions(+), 34 deletions(-)

Comments

Shawn Guo April 18, 2013, 6:30 a.m. UTC | #1
On Mon, Apr 15, 2013 at 10:07:41AM +0200, Martin Fuzzey wrote:
> Currently clock providers defined in the DT are not registered
> on i.MX5 platforms since of_clk_init() is not called.
> 
> This is not a problem for the SOC's own clocks, which are registered
> in code,  but prevents the DT being used to define clocks for external
> hardware.
> 
> Fix this by calling of_clk_init() and actually using the DT to obtain
> the 4 SOC fixed clocks.
> These are already defined in the DT but were previously just used to
> manually obtain the rate.
> 
> Fall back to the old scheme for non DT platforms.
> 
> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
> 
> ---
> Changelog:
> V2: Applied comments from Sashca Hauer:
> 	* Use kasprintf instead of scnprintf to avoid length limit
> 	* Avoid use of IS_ERR_OR_NULL
> ---
>  arch/arm/mach-imx/clk-imx51-imx53.c |   79 ++++++++++++++++++++---------------
>  1 files changed, 45 insertions(+), 34 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
> index 3228b4e..4b28cfc 100644
> --- a/arch/arm/mach-imx/clk-imx51-imx53.c
> +++ b/arch/arm/mach-imx/clk-imx51-imx53.c
> @@ -117,17 +117,56 @@ enum imx5_clks {
>  static struct clk *clk[clk_max];
>  static struct clk_onecell_data clk_data;
>  
> +
> +static struct clk * __init mx5_obtain_fixed_clock_from_dt(const char *name)
> +{
> +#ifdef CONFIG_OF

We have selected USE_OF at the sub-architecture level, so the ifdef
plays nothing here.

> +	struct of_phandle_args phandle = {0};
> +	struct clk *clk = ERR_PTR(-ENODEV);
> +	char *compatible;
> +
> +	compatible = kasprintf(GFP_KERNEL, "fsl,imx-%s", name);

What about finding the node by path as below?

	path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
	phandle.np = of_find_node_by_path(path);

I have to admit that those imx custom compatibles for fixed-clock
shouldn't necessarily be there at all.  Let's stop spreading the use.

Shawn

> +	if (!compatible)
> +		return ERR_PTR(-ENOMEM);
> +
> +	phandle.np = of_find_compatible_node(NULL, NULL, compatible);
> +	kfree(compatible);
> +	if (phandle.np) {
> +		clk = of_clk_get_from_provider(&phandle);
> +		of_node_put(phandle.np);
> +	}
> +	return clk;
> +#else
> +	return ERR_PTR(-ENODEV);
> +#endif
> +}
> +
> +static struct clk * __init mx5_obtain_fixed_clock(
> +			const char *name, unsigned long rate)
> +{
> +	struct clk *clk;
> +
> +	clk = mx5_obtain_fixed_clock_from_dt(name);
> +	if (IS_ERR(clk))
> +		clk = imx_clk_fixed(name, rate);
> +	return clk;
> +}
> +
>  static void __init mx5_clocks_common_init(unsigned long rate_ckil,
>  		unsigned long rate_osc, unsigned long rate_ckih1,
>  		unsigned long rate_ckih2)
>  {
>  	int i;
>  
> +#ifdef CONFIG_OF
> +	of_clk_init(NULL);
> +#endif
> +
>  	clk[dummy] = imx_clk_fixed("dummy", 0);
> -	clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
> -	clk[osc] = imx_clk_fixed("osc", rate_osc);
> -	clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
> -	clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
> +	clk[ckil] = mx5_obtain_fixed_clock("ckil", rate_ckil);
> +	clk[osc] = mx5_obtain_fixed_clock("osc", rate_osc);
> +	clk[ckih1] = mx5_obtain_fixed_clock("ckih1", rate_ckih1);
> +	clk[ckih2] = mx5_obtain_fixed_clock("ckih2", rate_ckih2);
>  
>  	clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
>  				lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
> @@ -540,41 +579,13 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
>  }
>  
>  #ifdef CONFIG_OF
> -static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
> -				   unsigned long *ckih1, unsigned long *ckih2)
> -{
> -	struct device_node *np;
> -
> -	/* retrieve the freqency of fixed clocks from device tree */
> -	for_each_compatible_node(np, NULL, "fixed-clock") {
> -		u32 rate;
> -		if (of_property_read_u32(np, "clock-frequency", &rate))
> -			continue;
> -
> -		if (of_device_is_compatible(np, "fsl,imx-ckil"))
> -			*ckil = rate;
> -		else if (of_device_is_compatible(np, "fsl,imx-osc"))
> -			*osc = rate;
> -		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
> -			*ckih1 = rate;
> -		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
> -			*ckih2 = rate;
> -	}
> -}
> -
>  int __init mx51_clocks_init_dt(void)
>  {
> -	unsigned long ckil, osc, ckih1, ckih2;
> -
> -	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
> -	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
> +	return mx51_clocks_init(0, 0, 0, 0);
>  }
>  
>  int __init mx53_clocks_init_dt(void)
>  {
> -	unsigned long ckil, osc, ckih1, ckih2;
> -
> -	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
> -	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
> +	return mx53_clocks_init(0, 0, 0, 0);
>  }
>  #endif
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Martin Fuzzey April 18, 2013, 8:36 a.m. UTC | #2
On 18/04/13 08:30, Shawn Guo wrote:
> +static struct clk * __init mx5_obtain_fixed_clock_from_dt(const char *name)
> +{
> +#ifdef CONFIG_OF
> We have selected USE_OF at the sub-architecture level, so the ifdef
> plays nothing here.
Ah ok so what happens on non DT platforms (looks like Babbage)
Does this mean that there is an empty DT in that case?

I was going by the existing code which already has this #ifdef

>> +	struct of_phandle_args phandle = {0};
>> +	struct clk *clk = ERR_PTR(-ENODEV);
>> +	char *compatible;
>> +
>> +	compatible = kasprintf(GFP_KERNEL, "fsl,imx-%s", name);
> What about finding the node by path as below?
>
> 	path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
> 	phandle.np = of_find_node_by_path(path);
>
> I have to admit that those imx custom compatibles for fixed-clock
> shouldn't necessarily be there at all.  Let's stop spreading the use.
I can't find anything in the DT binding documentation that says the 
clocks have to be
under /clocks  (but then again the fsl,imx- compatible string isn't 
documented either).

My understanding of DT is that the absolute node path is generally 
unimportant with
the exception of a few special nodes like /, /memory, /chosen

But I don't have a strong opinion on this - if the consensus is that 
path based lookup
is better I'll do that.

Regards,

Martin
Shawn Guo April 18, 2013, 3:15 p.m. UTC | #3
On Thu, Apr 18, 2013 at 10:36:53AM +0200, Martin Fuzzey wrote:
> On 18/04/13 08:30, Shawn Guo wrote:
> >+static struct clk * __init mx5_obtain_fixed_clock_from_dt(const char *name)
> >+{
> >+#ifdef CONFIG_OF
> >We have selected USE_OF at the sub-architecture level, so the ifdef
> >plays nothing here.
> Ah ok so what happens on non DT platforms (looks like Babbage)
> Does this mean that there is an empty DT in that case?
> 
I think function of_find_* will return NULL for non-DT boot, so
ERR_PTR(-ENODEV) will just be returned from
mx5_obtain_fixed_clock_from_dt().

> I was going by the existing code which already has this #ifdef
> 
Right.  We just haven't got the chance to clean them up.

> >>+	struct of_phandle_args phandle = {0};
> >>+	struct clk *clk = ERR_PTR(-ENODEV);
> >>+	char *compatible;
> >>+
> >>+	compatible = kasprintf(GFP_KERNEL, "fsl,imx-%s", name);
> >What about finding the node by path as below?
> >
> >	path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
> >	phandle.np = of_find_node_by_path(path);
> >
> >I have to admit that those imx custom compatibles for fixed-clock
> >shouldn't necessarily be there at all.  Let's stop spreading the use.
> I can't find anything in the DT binding documentation that says the
> clocks have to be
> under /clocks  (but then again the fsl,imx- compatible string isn't
> documented either).
> 
> My understanding of DT is that the absolute node path is generally
> unimportant with
> the exception of a few special nodes like /, /memory, /chosen
> 
I think the function of_find_node_by_path() is created not only for
finding these special nodes.

> But I don't have a strong opinion on this - if the consensus is that
> path based lookup
> is better I'll do that.
> 
We just want to save the custom compatible string which are there only
for finding a fixed-clock, while node name/path can be used for
searching.

Shawn
diff mbox

Patch

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 3228b4e..4b28cfc 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -117,17 +117,56 @@  enum imx5_clks {
 static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;
 
+
+static struct clk * __init mx5_obtain_fixed_clock_from_dt(const char *name)
+{
+#ifdef CONFIG_OF
+	struct of_phandle_args phandle = {0};
+	struct clk *clk = ERR_PTR(-ENODEV);
+	char *compatible;
+
+	compatible = kasprintf(GFP_KERNEL, "fsl,imx-%s", name);
+	if (!compatible)
+		return ERR_PTR(-ENOMEM);
+
+	phandle.np = of_find_compatible_node(NULL, NULL, compatible);
+	kfree(compatible);
+	if (phandle.np) {
+		clk = of_clk_get_from_provider(&phandle);
+		of_node_put(phandle.np);
+	}
+	return clk;
+#else
+	return ERR_PTR(-ENODEV);
+#endif
+}
+
+static struct clk * __init mx5_obtain_fixed_clock(
+			const char *name, unsigned long rate)
+{
+	struct clk *clk;
+
+	clk = mx5_obtain_fixed_clock_from_dt(name);
+	if (IS_ERR(clk))
+		clk = imx_clk_fixed(name, rate);
+	return clk;
+}
+
 static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 		unsigned long rate_osc, unsigned long rate_ckih1,
 		unsigned long rate_ckih2)
 {
 	int i;
 
+#ifdef CONFIG_OF
+	of_clk_init(NULL);
+#endif
+
 	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
-	clk[osc] = imx_clk_fixed("osc", rate_osc);
-	clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
-	clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+	clk[ckil] = mx5_obtain_fixed_clock("ckil", rate_ckil);
+	clk[osc] = mx5_obtain_fixed_clock("osc", rate_osc);
+	clk[ckih1] = mx5_obtain_fixed_clock("ckih1", rate_ckih1);
+	clk[ckih2] = mx5_obtain_fixed_clock("ckih2", rate_ckih2);
 
 	clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
 				lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -540,41 +579,13 @@  int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 }
 
 #ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
-				   unsigned long *ckih1, unsigned long *ckih2)
-{
-	struct device_node *np;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			*ckil = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			*osc = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			*ckih1 = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
-			*ckih2 = rate;
-	}
-}
-
 int __init mx51_clocks_init_dt(void)
 {
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+	return mx51_clocks_init(0, 0, 0, 0);
 }
 
 int __init mx53_clocks_init_dt(void)
 {
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+	return mx53_clocks_init(0, 0, 0, 0);
 }
 #endif