@@ -20,7 +20,6 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/platform_data/omap_ocp2scp.h>
-#include <linux/usb/omap_control_usb.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -253,49 +252,6 @@ static inline void omap_init_camera(void)
#endif
}
-#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
- .type = 1,
-};
-
-struct resource omap4_control_usb_res[] = {
- {
- .name = "control_dev_conf",
- .start = 0x4a002300,
- .end = 0x4a002303,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "otghs_control",
- .start = 0x4a00233c,
- .end = 0x4a00233f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap4_control_usb = {
- .name = "omap-control-usb",
- .id = -1,
- .dev = {
- .platform_data = &omap4_control_usb_pdata,
- },
- .num_resources = 2,
- .resource = omap4_control_usb_res,
-};
-
-static inline void __init omap_init_control_usb(void)
-{
- if (!cpu_is_omap44xx())
- return;
-
- if (platform_device_register(&omap4_control_usb))
- pr_err("Error registering omap_control_usb device\n");
-}
-
-#else
-static inline void omap_init_control_usb(void) { }
-#endif /* CONFIG_OMAP_CONTROL_USB */
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
@@ -651,7 +607,6 @@ static int __init omap2_init_devices(void)
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
- omap_init_control_usb();
omap_init_dmic();
omap_init_mcpdm();
omap_init_mcspi();
@@ -188,125 +188,6 @@ static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
return;
}
-static
-void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
- switch (port_mode[0]) {
- case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("usbb1_ulpiphy_stp",
- OMAP_PIN_OUTPUT);
- omap_mux_init_signal("usbb1_ulpiphy_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpiphy_dat7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("usbb1_ulpitll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("usbb1_ulpitll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_ulpitll_dat7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- default:
- break;
- }
- switch (port_mode[1]) {
- case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("usbb2_ulpiphy_stp",
- OMAP_PIN_OUTPUT);
- omap_mux_init_signal("usbb2_ulpiphy_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpiphy_dat7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("usbb2_ulpitll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("usbb2_ulpitll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_ulpitll_dat7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- case OMAP_USBHS_PORT_MODE_UNUSED:
- default:
- break;
- }
-}
-
static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
switch (port_mode[0]) {
@@ -404,78 +285,6 @@ static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
}
}
-static
-void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
- switch (port_mode[0]) {
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("usbb1_mm_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_mm_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
-
- case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("usbb1_mm_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
-
- case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("usbb1_mm_txen",
- OMAP_PIN_INPUT_PULLDOWN);
-
-
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("usbb1_mm_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb1_mm_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
-
- case OMAP_USBHS_PORT_MODE_UNUSED:
- default:
- break;
- }
-
- switch (port_mode[1]) {
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("usbb2_mm_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_mm_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
-
- case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
- case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("usbb2_mm_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
-
- case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("usbb2_mm_txen",
- OMAP_PIN_INPUT_PULLDOWN);
-
-
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
- case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("usbb2_mm_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usbb2_mm_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
-
- case OMAP_USBHS_PORT_MODE_UNUSED:
- default:
- break;
- }
-}
-
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
{
struct omap_hwmod *uhh_hwm, *tll_hwm;
@@ -489,9 +298,6 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
if (omap_rev() <= OMAP3430_REV_ES2_1)
pdata->single_ulpi_bypass = true;
- } else if (cpu_is_omap44xx()) {
- setup_4430ehci_io_mux(pdata->port_mode);
- setup_4430ohci_io_mux(pdata->port_mode);
}
uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
@@ -85,9 +85,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (cpu_is_omap44xx())
- musb_plat.has_mailbox = true;
-
if (soc_is_am35xx()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
This is no longer needed as omap4 is now booted using device tree. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/devices.c | 45 --------- arch/arm/mach-omap2/usb-host.c | 194 ---------------------------------------- arch/arm/mach-omap2/usb-musb.c | 3 - 3 files changed, 242 deletions(-)