diff mbox

Finally eradicate CONFIG_HOTPLUG

Message ID 20130521134935.d18c3f5c23485fb5ddabc365@canb.auug.org.au (mailing list archive)
State New, archived
Headers show

Commit Message

Stephen Rothwell May 21, 2013, 3:49 a.m. UTC
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: linux-arch@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-edac@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-pm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 Documentation/ABI/testing/sysfs-bus-pci |  5 +----
 Documentation/SubmitChecklist           |  2 +-
 Documentation/cpu-hotplug.txt           |  2 +-
 Documentation/hwmon/submitting-patches  |  3 +--
 Documentation/kbuild/kconfig.txt        |  2 +-
 Documentation/usb/hotplug.txt           |  6 +++---
 arch/arm/Kconfig                        |  2 +-
 arch/arm/kernel/module.c                |  8 --------
 arch/arm/kernel/vmlinux.lds.S           |  4 ----
 arch/arm/mach-ixp4xx/Kconfig            |  1 -
 arch/blackfin/Kconfig                   |  2 +-
 arch/cris/arch-v32/drivers/Kconfig      |  1 -
 arch/ia64/Kconfig                       |  1 -
 arch/mips/Kconfig                       |  2 +-
 arch/parisc/Kconfig                     |  1 -
 arch/powerpc/Kconfig                    |  2 +-
 arch/powerpc/mm/tlb_hash64.c            |  4 ++--
 arch/s390/Kconfig                       |  1 -
 arch/sh/Kconfig                         |  2 +-
 arch/sparc/Kconfig                      |  1 -
 arch/x86/Kconfig                        |  2 +-
 drivers/base/Kconfig                    |  2 --
 drivers/char/pcmcia/Kconfig             |  2 +-
 drivers/edac/Kconfig                    |  2 +-
 drivers/pci/Kconfig                     |  2 --
 drivers/pci/hotplug/Kconfig             |  2 +-
 drivers/pcmcia/Kconfig                  |  1 -
 drivers/staging/media/go7007/go7007.txt |  1 -
 fs/gfs2/Kconfig                         |  5 ++---
 include/asm-generic/vmlinux.lds.h       | 20 --------------------
 init/Kconfig                            |  3 ---
 kernel/power/Kconfig                    |  1 -
 mm/Kconfig                              |  2 +-
 33 files changed, 22 insertions(+), 75 deletions(-)

Comments

Hans Verkuil (hansverk) May 21, 2013, 7:38 a.m. UTC | #1
On Tue 21 May 2013 05:49:35 Stephen Rothwell wrote:
> Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
> it has been basically impossible to build a kernel with CONFIG_HOTPLUG
> turned off.  Remove all the remaining references to it.
> 
> Cc: linux-arch@vger.kernel.org
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Doug Thompson <dougthompson@xmission.com>
> Cc: linux-edac@vger.kernel.org
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-pcmcia@lists.infradead.org
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Steven Whitehouse <swhiteho@redhat.com>
> Cc: cluster-devel@redhat.com
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: linux-pm@vger.kernel.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: linux-mm@kvack.org
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

For drivers/staging/media/go7007/go7007.txt:

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans
Peter Stuge May 21, 2013, 10:13 a.m. UTC | #2
Are you changing the code to have HOTPLUG always -on- or -off- ?

From the commit message I had expected always -on-.


Stephen Rothwell wrote:
> --- a/include/asm-generic/vmlinux.lds.h
> +++ b/include/asm-generic/vmlinux.lds.h
> @@ -68,14 +68,6 @@
>   * are handled as text/data or they can be discarded (which
>   * often happens at runtime)
>   */
> -#ifdef CONFIG_HOTPLUG
> -#define DEV_KEEP(sec)    *(.dev##sec)
> -#define DEV_DISCARD(sec)
> -#else
> -#define DEV_KEEP(sec)
> -#define DEV_DISCARD(sec) *(.dev##sec)
> -#endif
> -
>  #ifdef CONFIG_HOTPLUG_CPU
>  #define CPU_KEEP(sec)    *(.cpu##sec)
>  #define CPU_DISCARD(sec)
> @@ -182,8 +174,6 @@
>  	*(.data)							\
>  	*(.ref.data)							\
>  	*(.data..shared_aligned) /* percpu related */			\
> -	DEV_KEEP(init.data)						\
> -	DEV_KEEP(exit.data)						\
..
> @@ -503,7 +489,6 @@
>  /* init and exit section handling */
>  #define INIT_DATA							\
>  	*(.init.data)							\
> -	DEV_DISCARD(init.data)						\

Shouldn't the effect of one of the above remain?


//Peter
Mauro Carvalho Chehab May 21, 2013, 10:21 a.m. UTC | #3
Em Tue, 21 May 2013 13:49:35 +1000
Stephen Rothwell <sfr@canb.auug.org.au> escreveu:

> Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
> it has been basically impossible to build a kernel with CONFIG_HOTPLUG
> turned off.  Remove all the remaining references to it.
> 
> Cc: linux-arch@vger.kernel.org
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Doug Thompson <dougthompson@xmission.com>
> Cc: linux-edac@vger.kernel.org
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-pcmcia@lists.infradead.org
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Steven Whitehouse <swhiteho@redhat.com>
> Cc: cluster-devel@redhat.com
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: linux-pm@vger.kernel.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: linux-mm@kvack.org
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Cheers,
Mauro
Stephen Rothwell May 22, 2013, 12:04 a.m. UTC | #4
Hi Peter,

On Tue, 21 May 2013 12:13:49 +0200 Peter Stuge <peter@stuge.se> wrote:
>
> Are you changing the code to have HOTPLUG always -on- or -off- ?
> 
> From the commit message I had expected always -on-.

Yes, it has been that way for some time.

> Stephen Rothwell wrote:
> > --- a/include/asm-generic/vmlinux.lds.h
> > +++ b/include/asm-generic/vmlinux.lds.h
> > @@ -68,14 +68,6 @@
> >   * are handled as text/data or they can be discarded (which
> >   * often happens at runtime)
> >   */
> > -#ifdef CONFIG_HOTPLUG
> > -#define DEV_KEEP(sec)    *(.dev##sec)
> > -#define DEV_DISCARD(sec)
> > -#else
> > -#define DEV_KEEP(sec)
> > -#define DEV_DISCARD(sec) *(.dev##sec)
> > -#endif
> > -
> >  #ifdef CONFIG_HOTPLUG_CPU
> >  #define CPU_KEEP(sec)    *(.cpu##sec)
> >  #define CPU_DISCARD(sec)
> > @@ -182,8 +174,6 @@
> >  	*(.data)							\
> >  	*(.ref.data)							\
> >  	*(.data..shared_aligned) /* percpu related */			\
> > -	DEV_KEEP(init.data)						\
> > -	DEV_KEEP(exit.data)						\
> ..
> > @@ -503,7 +489,6 @@
> >  /* init and exit section handling */
> >  #define INIT_DATA							\
> >  	*(.init.data)							\
> > -	DEV_DISCARD(init.data)						\
> 
> Shouldn't the effect of one of the above remain?

As far as I can tell, all references to devinit and devexit have now been
removed from the kernel, so nothing will generate code in these sections
any more, so the linker script no longer needs to deal with them at all.
diff mbox

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 1ce5ae3..5210a51 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -64,7 +64,6 @@  Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of all PCI buses in the system, and
 		re-discover previously removed devices.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../msi_irqs/
 Date:		September, 2011
@@ -90,7 +89,6 @@  Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
 Description:
 		Writing a non-zero value to this attribute will
 		hot-remove the PCI device and any of its children.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
 Date:		May 2011
@@ -99,7 +97,7 @@  Description:
 		Writing a non-zero value to this attribute will
 		force a rescan of the bus and all child buses,
 		and re-discover devices removed earlier from this
-		part of the device tree.  Depends on CONFIG_HOTPLUG.
+		part of the device tree.
 
 What:		/sys/bus/pci/devices/.../rescan
 Date:		January 2009
@@ -109,7 +107,6 @@  Description:
 		force a rescan of the device's parent bus and all
 		child buses, and re-discover devices removed earlier
 		from this part of the device tree.
-		Depends on CONFIG_HOTPLUG.
 
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index dc0e332..2b7e32d 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -105,5 +105,5 @@  kernel patches.
     same time, just various/random combinations of them]:
 
     CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
-    CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ,
+    CONFIG_BLOCK, CONFIG_PM, CONFIG_MAGIC_SYSRQ,
     CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y)
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 9f40135..0efd1b9 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -128,7 +128,7 @@  A: When doing make defconfig, Enable CPU hotplug support
 
    "Processor type and Features" -> Support for Hotpluggable CPUs
 
-Make sure that you have CONFIG_HOTPLUG, and CONFIG_SMP turned on as well.
+Make sure that you have CONFIG_SMP turned on as well.
 
 You would need to enable CONFIG_HOTPLUG_CPU for SMP suspend/resume support
 as well.
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
index 843751c..4628646 100644
--- a/Documentation/hwmon/submitting-patches
+++ b/Documentation/hwmon/submitting-patches
@@ -27,8 +27,7 @@  increase the chances of your change being accepted.
   explicitly below the patch header.
 
 * If your patch (or the driver) is affected by configuration options such as
-  CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
-  variants.
+  CONFIG_SMP, make sure it compiles for all configuration variants.
 
 
 2. Adding functionality to existing drivers
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 3f429ed..213859e 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -165,7 +165,7 @@  Searching in menuconfig:
 	Example:
 		/hotplug
 		This lists all config symbols that contain "hotplug",
-		e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
+		e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
 
 	For search help, enter / followed TAB-TAB-TAB (to highlight
 	<Help>) and Enter.  This will tell you that you can also use
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt
index 4c94571..6424b13 100644
--- a/Documentation/usb/hotplug.txt
+++ b/Documentation/usb/hotplug.txt
@@ -33,9 +33,9 @@  you get the best hotplugging when you configure a highly modular system.
 
 KERNEL HOTPLUG HELPER (/sbin/hotplug)
 
-When you compile with CONFIG_HOTPLUG, you get a new kernel parameter:
-/proc/sys/kernel/hotplug, which normally holds the pathname "/sbin/hotplug".
-That parameter names a program which the kernel may invoke at various times.
+There is a kernel parameter: /proc/sys/kernel/hotplug, which normally
+holds the pathname "/sbin/hotplug".  That parameter names a program
+which the kernel may invoke at various times.
 
 The /sbin/hotplug program can be invoked by any subsystem as part of its
 reaction to a configuration change, from a thread in that subsystem.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d423d58..b30db02 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1527,7 +1527,7 @@  config NR_CPUS
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG
+	depends on SMP
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1e9be5d..85c3fb6 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -288,24 +288,16 @@  int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 
 		if (strcmp(".ARM.exidx.init.text", secname) == 0)
 			maps[ARM_SEC_INIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].unw_sec = s;
 		else if (strcmp(".ARM.exidx", secname) == 0)
 			maps[ARM_SEC_CORE].unw_sec = s;
 		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
 			maps[ARM_SEC_EXIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].unw_sec = s;
 		else if (strcmp(".init.text", secname) == 0)
 			maps[ARM_SEC_INIT].txt_sec = s;
-		else if (strcmp(".devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].txt_sec = s;
 		else if (strcmp(".text", secname) == 0)
 			maps[ARM_SEC_CORE].txt_sec = s;
 		else if (strcmp(".exit.text", secname) == 0)
 			maps[ARM_SEC_EXIT].txt_sec = s;
-		else if (strcmp(".devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].txt_sec = s;
 	}
 
 	for (i = 0; i < ARM_SEC_MAX; i++)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index a871b8e..fa25e4e 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -70,10 +70,6 @@  SECTIONS
 		ARM_EXIT_DISCARD(EXIT_TEXT)
 		ARM_EXIT_DISCARD(EXIT_DATA)
 		EXIT_CALL
-#ifndef CONFIG_HOTPLUG
-		*(.ARM.exidx.devexit.text)
-		*(.ARM.extab.devexit.text)
-#endif
 #ifndef CONFIG_MMU
 		*(.fixup)
 		*(__ex_table)
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 73a2d90..30e1ebe 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -235,7 +235,6 @@  config IXP4XX_QMGR
 config IXP4XX_NPE
 	tristate "IXP4xx Network Processor Engine support"
 	select FW_LOADER
-	select HOTPLUG
 	help
 	  This driver supports IXP4xx built-in network coprocessors
 	  and is automatically selected by Ethernet and HSS drivers.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index a117652..b573827 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -253,7 +253,7 @@  config NR_CPUS
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG
+	depends on SMP
 	default y
 
 config BF_REV_MIN
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index c55971a..ab725ed 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -617,7 +617,6 @@  config ETRAX_PV_CHANGEABLE_BITS
 config ETRAX_CARDBUS
         bool "Cardbus support"
         depends on ETRAX_ARCH_V32
-        select HOTPLUG
         help
 	 Enabled the ETRAX Cardbus driver.
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 1a2b774..5a768ad 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -376,7 +376,6 @@  config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
-	select HOTPLUG
 	default n
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a58ab9..e433b90 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -962,7 +962,7 @@  config SYS_HAS_EARLY_PRINTK
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
 	help
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index cad060f..6d0969a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -254,7 +254,6 @@  config IRQSTACKS
 config HOTPLUG_CPU
 	bool
 	default y if SMP
-	select HOTPLUG
 
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c33e3ad..508e3fe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -341,7 +341,7 @@  config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && (PPC_PSERIES || \
+	depends on SMP && (PPC_PSERIES || \
 	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 023ec8a..7df1c5e 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -183,8 +183,8 @@  void tlb_flush(struct mmu_gather *tlb)
  * since 64K pages may overlap with other bridges when using 64K pages
  * with 4K HW pages on IO space.
  *
- * Because of that usage pattern, it's only available with CONFIG_HOTPLUG
- * and is implemented for small size rather than speed.
+ * Because of that usage pattern, it is implemented for small size rather
+ * than speed.
  */
 void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
 			      unsigned long end)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2c9789d..d97868b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -302,7 +302,6 @@  config HOTPLUG_CPU
 	def_bool y
 	prompt "Support for hot-pluggable CPUs"
 	depends on SMP
-	select HOTPLUG
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8c868cf..1020dd8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -748,7 +748,7 @@  config NR_CPUS
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG
+	depends on SMP
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9ac9f16..a00cbd3 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -243,7 +243,6 @@  config SECCOMP
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SPARC64 && SMP
-	select HOTPLUG
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a154a9..770cf04 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1726,7 +1726,7 @@  config PHYSICAL_ALIGN
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG
+	depends on SMP
 	---help---
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 07abd9d..5daa259 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -2,7 +2,6 @@  menu "Generic Driver Options"
 
 config UEVENT_HELPER_PATH
 	string "path to uevent helper"
-	depends on HOTPLUG
 	default ""
 	help
 	  Path to uevent helper program forked by the kernel for
@@ -23,7 +22,6 @@  config UEVENT_HELPER_PATH
 
 config DEVTMPFS
 	bool "Maintain a devtmpfs filesystem to mount at /dev"
-	depends on HOTPLUG
 	help
 	  This creates a tmpfs/ramfs filesystem instance early at bootup.
 	  In this filesystem, the kernel driver core maintains device
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index 2a166d5..b27f534 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -3,7 +3,7 @@ 
 #
 
 menu "PCMCIA character devices"
-	depends on HOTPLUG && PCMCIA!=n
+	depends on PCMCIA!=n
 
 config SYNCLINK_CS
 	tristate "SyncLink PC Card support"
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e443f2c1..a697a64 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -145,7 +145,7 @@  config EDAC_E7XXX
 
 config EDAC_E752X
 	tristate "Intel e752x (e7520, e7525, e7320) and 3100"
-	depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
+	depends on EDAC_MM_EDAC && PCI && X86
 	help
 	  Support for error detection and correction on the Intel
 	  E7520, E7525, E7320 server chipsets.
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6d51aa6..77497f1 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -55,7 +55,6 @@  config PCI_STUB
 config XEN_PCIDEV_FRONTEND
         tristate "Xen PCI Frontend"
         depends on PCI && X86 && XEN
-        select HOTPLUG
         select PCI_XEN
 	select XEN_XENBUS_FRONTEND
         default y
@@ -113,7 +112,6 @@  config PCI_IOAPIC
 	tristate "PCI IO-APIC hotplug support" if X86
 	depends on PCI
 	depends on ACPI
-	depends on HOTPLUG
 	default !X86
 
 config PCI_LABEL
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9fcb87f..bb7ebb2 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@ 
 
 menuconfig HOTPLUG_PCI
 	tristate "Support for PCI Hotplug"
-	depends on PCI && HOTPLUG && SYSFS
+	depends on PCI && SYSFS
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index b90f85b..1c63624 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -4,7 +4,6 @@ 
 
 menuconfig PCCARD
 	tristate "PCCard (PCMCIA/CardBus) support"
-	depends on HOTPLUG
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt
index fcb3e23..dc0026c 100644
--- a/drivers/staging/media/go7007/go7007.txt
+++ b/drivers/staging/media/go7007/go7007.txt
@@ -78,7 +78,6 @@  All vendor-built kernels should already be configured properly.  However,
 for custom-built kernels, the following options need to be enabled in the
 kernel as built-in or modules:
 
-	CONFIG_HOTPLUG           - Support for hot-pluggable devices
 	CONFIG_MODULES           - Enable loadable module support
 	CONFIG_KMOD              - Automatic kernel module loading
 	CONFIG_FW_LOADER         - Hotplug firmware loading support
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index eb08c9e..432ea56 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -20,13 +20,12 @@  config GFS2_FS
 	  be found here: http://sources.redhat.com/cluster
 
 	  The "nolock" lock module is now built in to GFS2 by default. If
-	  you want to use the DLM, be sure to enable HOTPLUG and IPv4/6
-	  networking.
+	  you want to use the DLM, be sure to enable IPv4/6 networking.
 
 config GFS2_FS_LOCKING_DLM
 	bool "GFS2 DLM locking"
 	depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \
-		HOTPLUG && DLM && CONFIGFS_FS && SYSFS
+		DLM && CONFIGFS_FS && SYSFS
 	help
 	  Multiple node locking module for GFS2
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index eb58d2d..4f27372 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -68,14 +68,6 @@ 
  * are handled as text/data or they can be discarded (which
  * often happens at runtime)
  */
-#ifdef CONFIG_HOTPLUG
-#define DEV_KEEP(sec)    *(.dev##sec)
-#define DEV_DISCARD(sec)
-#else
-#define DEV_KEEP(sec)
-#define DEV_DISCARD(sec) *(.dev##sec)
-#endif
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define CPU_KEEP(sec)    *(.cpu##sec)
 #define CPU_DISCARD(sec)
@@ -182,8 +174,6 @@ 
 	*(.data)							\
 	*(.ref.data)							\
 	*(.data..shared_aligned) /* percpu related */			\
-	DEV_KEEP(init.data)						\
-	DEV_KEEP(exit.data)						\
 	CPU_KEEP(init.data)						\
 	CPU_KEEP(exit.data)						\
 	MEM_KEEP(init.data)						\
@@ -372,8 +362,6 @@ 
 	/* __*init sections */						\
 	__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) {		\
 		*(.ref.rodata)						\
-		DEV_KEEP(init.rodata)					\
-		DEV_KEEP(exit.rodata)					\
 		CPU_KEEP(init.rodata)					\
 		CPU_KEEP(exit.rodata)					\
 		MEM_KEEP(init.rodata)					\
@@ -416,8 +404,6 @@ 
 		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
-	DEV_KEEP(init.text)						\
-	DEV_KEEP(exit.text)						\
 	CPU_KEEP(init.text)						\
 	CPU_KEEP(exit.text)						\
 	MEM_KEEP(init.text)						\
@@ -503,7 +489,6 @@ 
 /* init and exit section handling */
 #define INIT_DATA							\
 	*(.init.data)							\
-	DEV_DISCARD(init.data)						\
 	CPU_DISCARD(init.data)						\
 	MEM_DISCARD(init.data)						\
 	KERNEL_CTORS()							\
@@ -511,7 +496,6 @@ 
 	*(.init.rodata)							\
 	FTRACE_EVENTS()							\
 	TRACE_SYSCALLS()						\
-	DEV_DISCARD(init.rodata)					\
 	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.rodata)					\
 	CLK_OF_TABLES()							\
@@ -521,14 +505,11 @@ 
 
 #define INIT_TEXT							\
 	*(.init.text)							\
-	DEV_DISCARD(init.text)						\
 	CPU_DISCARD(init.text)						\
 	MEM_DISCARD(init.text)
 
 #define EXIT_DATA							\
 	*(.exit.data)							\
-	DEV_DISCARD(exit.data)						\
-	DEV_DISCARD(exit.rodata)					\
 	CPU_DISCARD(exit.data)						\
 	CPU_DISCARD(exit.rodata)					\
 	MEM_DISCARD(exit.data)						\
@@ -536,7 +517,6 @@ 
 
 #define EXIT_TEXT							\
 	*(.exit.text)							\
-	DEV_DISCARD(exit.text)						\
 	CPU_DISCARD(exit.text)						\
 	MEM_DISCARD(exit.text)
 
diff --git a/init/Kconfig b/init/Kconfig
index 9d3a788..a5e0917 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1244,9 +1244,6 @@  config SYSCTL_ARCH_UNALIGN_ALLOW
 	  the unaligned access emulation.
 	  see arch/parisc/kernel/unaligned.c for reference
 
-config HOTPLUG
-	def_bool y
-
 config HAVE_PCSPKR_PLATFORM
 	bool
 
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5dfdc9e..9c39de0 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -100,7 +100,6 @@  config PM_SLEEP_SMP
 	depends on SMP
 	depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE
 	depends on PM_SLEEP
-	select HOTPLUG
 	select HOTPLUG_CPU
 
 config PM_AUTOSLEEP
diff --git a/mm/Kconfig b/mm/Kconfig
index e742d06..f5e698e 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -173,7 +173,7 @@  config HAVE_BOOTMEM_INFO_NODE
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
-	depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG
+	depends on ARCH_ENABLE_MEMORY_HOTPLUG
 	depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
 
 config MEMORY_HOTPLUG_SPARSE