Message ID | 20130607215835.GL3331@atomide.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Tony Lindgren <tony@atomide.com> writes: > In the runtime_suspend function pdata is not being used, and > also blocks the function in device tree based booting. Fix it > by removing the unused pdata from the runtime_suspend function. > > Further, context loss count is not being passed in pdata, so > let's just reinitialize the port every time for those case. > This can be further optimized later on for the device tree > case by adding detection for the hardware state and possibly > by adding a driver specific autosuspend timeout. > > And doing this, we can then make the related dev_err into a > dev_dbg message instead of an error. > > In order for the wake-up events to work, we also need to set > autosuspend_timeout to -1 if 0, and also device_init_wakeup() > as that's not being done by the platform init code for the > device tree case. > > Note that this does not affect legacy booting, and in fact > might make it work for the cases where the context loss info > is not being passed in pdata. > > Thanks to Kevin Hilman <khilman@linaro.org> for debugging > and suggesting fixes for the autosuspend_timeout and > device_init_wakeup() related initializiation. > > Cc: Kevin Hilman <khilman@linaro.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> There's a stray whitespace change in the patch, and also, maybe it should be broken up into a few different patches: 1) stray pdata 2) context_loss: -EINVAL + dev_dbg change 3) device_init_wakeup 4) autosuspend timeout defaults but otherwise the content is right. Reviewed-by: Kevin Hilman <khilman@linaro.org> Also, tested on OMAP3/4 Tested-by: Kevin Hilman <khilman@linaro.org> Kevin > --- > > This can wait for v3.11 merge window as the related PM patches > have not yet been merged. > > --- a/drivers/tty/serial/omap-serial.c > +++ b/drivers/tty/serial/omap-serial.c > @@ -197,7 +197,7 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) > struct omap_uart_port_info *pdata = up->dev->platform_data; > > if (!pdata || !pdata->get_context_loss_count) > - return 0; > + return -EINVAL; > > return pdata->get_context_loss_count(up->dev); > } > @@ -1482,6 +1482,9 @@ static int serial_omap_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, up); > pm_runtime_enable(&pdev->dev); > + if (omap_up_info->autosuspend_timeout == 0) > + omap_up_info->autosuspend_timeout = -1; > + device_init_wakeup(up->dev, true); > pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_set_autosuspend_delay(&pdev->dev, > omap_up_info->autosuspend_timeout); > @@ -1500,6 +1503,7 @@ static int serial_omap_probe(struct platform_device *pdev) > > pm_runtime_mark_last_busy(up->dev); > pm_runtime_put_autosuspend(up->dev); > + > return 0; > > err_add_port: > @@ -1591,14 +1595,10 @@ static void serial_omap_restore_context(struct uart_omap_port *up) > static int serial_omap_runtime_suspend(struct device *dev) > { > struct uart_omap_port *up = dev_get_drvdata(dev); > - struct omap_uart_port_info *pdata = dev->platform_data; > > if (!up) > return -EINVAL; > > - if (!pdata) > - return 0; > - > up->context_loss_cnt = serial_omap_get_context_loss_count(up); > > if (device_may_wakeup(dev)) { > @@ -1626,7 +1626,7 @@ static int serial_omap_runtime_resume(struct device *dev) > int loss_cnt = serial_omap_get_context_loss_count(up); > > if (loss_cnt < 0) { > - dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n", > + dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n", > loss_cnt); > serial_omap_restore_context(up); > } else if (up->context_loss_cnt != loss_cnt) { > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
--- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -197,7 +197,7 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) struct omap_uart_port_info *pdata = up->dev->platform_data; if (!pdata || !pdata->get_context_loss_count) - return 0; + return -EINVAL; return pdata->get_context_loss_count(up->dev); } @@ -1482,6 +1482,9 @@ static int serial_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, up); pm_runtime_enable(&pdev->dev); + if (omap_up_info->autosuspend_timeout == 0) + omap_up_info->autosuspend_timeout = -1; + device_init_wakeup(up->dev, true); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, omap_up_info->autosuspend_timeout); @@ -1500,6 +1503,7 @@ static int serial_omap_probe(struct platform_device *pdev) pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); + return 0; err_add_port: @@ -1591,14 +1595,10 @@ static void serial_omap_restore_context(struct uart_omap_port *up) static int serial_omap_runtime_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); - struct omap_uart_port_info *pdata = dev->platform_data; if (!up) return -EINVAL; - if (!pdata) - return 0; - up->context_loss_cnt = serial_omap_get_context_loss_count(up); if (device_may_wakeup(dev)) { @@ -1626,7 +1626,7 @@ static int serial_omap_runtime_resume(struct device *dev) int loss_cnt = serial_omap_get_context_loss_count(up); if (loss_cnt < 0) { - dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n", + dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n", loss_cnt); serial_omap_restore_context(up); } else if (up->context_loss_cnt != loss_cnt) {
In the runtime_suspend function pdata is not being used, and also blocks the function in device tree based booting. Fix it by removing the unused pdata from the runtime_suspend function. Further, context loss count is not being passed in pdata, so let's just reinitialize the port every time for those case. This can be further optimized later on for the device tree case by adding detection for the hardware state and possibly by adding a driver specific autosuspend timeout. And doing this, we can then make the related dev_err into a dev_dbg message instead of an error. In order for the wake-up events to work, we also need to set autosuspend_timeout to -1 if 0, and also device_init_wakeup() as that's not being done by the platform init code for the device tree case. Note that this does not affect legacy booting, and in fact might make it work for the cases where the context loss info is not being passed in pdata. Thanks to Kevin Hilman <khilman@linaro.org> for debugging and suggesting fixes for the autosuspend_timeout and device_init_wakeup() related initializiation. Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- This can wait for v3.11 merge window as the related PM patches have not yet been merged.